Sign upLogin

Takumon/mean-blog

View on GitHub
Star

Showing 240 of 340 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export class AddVote implements Action {
  readonly type = ArticleActionTypes.AddVote;

  constructor(public payload: {
    _idOfVoter: string
Severity: Minor
Found in src/app/state/article.actions.ts and 1 other location - About 35 mins to fix
src/app/state/article.actions.ts on lines 304..310

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class AddDraft implements Action {
  readonly type = DraftActionTypes.AddDraft;

  constructor(public payload: { draft: DraftModel }) {}
}
Severity: Major
Found in src/app/drafts/state/draft.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 80..84
src/app/drafts/state/draft.actions.ts on lines 129..133
src/app/state/article.actions.ts on lines 68..74
src/app/state/article.actions.ts on lines 110..114
src/app/state/article.actions.ts on lines 116..120
src/app/state/article.actions.ts on lines 265..269

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class UpsertDraft implements Action {
  readonly type = DraftActionTypes.UpsertDraft;

  constructor(public payload: { draft: DraftModel }) {}
}
Severity: Major
Found in src/app/drafts/state/draft.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 61..65
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 129..133
src/app/state/article.actions.ts on lines 68..74
src/app/state/article.actions.ts on lines 110..114
src/app/state/article.actions.ts on lines 116..120
src/app/state/article.actions.ts on lines 265..269

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class LoadArticleSuccess implements Action {
  readonly type = ArticleActionTypes.LoadArticleSuccess;

  constructor(public payload: {
    article: ArticleWithUserModel
Severity: Major
Found in src/app/state/article.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 61..65
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 80..84
src/app/drafts/state/draft.actions.ts on lines 129..133
src/app/state/article.actions.ts on lines 110..114
src/app/state/article.actions.ts on lines 116..120
src/app/state/article.actions.ts on lines 265..269

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class AddArticleSuccess implements Action {
  readonly type = ArticleActionTypes.AddArticleSuccess;

  constructor(public payload: { article: ArticleModel }) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 61..65
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 80..84
src/app/drafts/state/draft.actions.ts on lines 129..133
src/app/state/article.actions.ts on lines 68..74
src/app/state/article.actions.ts on lines 110..114
src/app/state/article.actions.ts on lines 265..269

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class DeleteArticleSuccess implements Action {
  readonly type = ArticleActionTypes.DeleteArticleSuccess;

  constructor(public payload: { article: ArticleModel }) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 61..65
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 80..84
src/app/drafts/state/draft.actions.ts on lines 129..133
src/app/state/article.actions.ts on lines 68..74
src/app/state/article.actions.ts on lines 110..114
src/app/state/article.actions.ts on lines 116..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (userIds instanceof Array) {
      userFindCondition = {
        userId: {
          $in: userIds
        }
Severity: Minor
Found in server/routes/article.ts and 1 other location - About 35 mins to fix
server/routes/search-condition.ts on lines 38..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export class DeleteVote implements Action {
  readonly type = ArticleActionTypes.DeleteVote;

  constructor(public payload: {
    _idOfVoter: string
Severity: Minor
Found in src/app/state/article.actions.ts and 1 other location - About 35 mins to fix
src/app/state/article.actions.ts on lines 279..285

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export class DeleteVoteOfArticlesFail implements Action {
  readonly type = ArticleActionTypes.DeleteVoteOfArticlesFail;

  constructor(public payload: {error: any}) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 3 other locations - About 35 mins to fix
src/app/state/article.actions.ts on lines 208..212
src/app/state/article.actions.ts on lines 271..275
src/app/state/article.actions.ts on lines 296..300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class AddArticle implements Action {
  readonly type = ArticleActionTypes.AddArticle;

  constructor(public payload: { article: ArticleModel }) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 61..65
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 80..84
src/app/drafts/state/draft.actions.ts on lines 129..133
src/app/state/article.actions.ts on lines 68..74
src/app/state/article.actions.ts on lines 116..120
src/app/state/article.actions.ts on lines 265..269

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export class AddVoteOfArticlesFail implements Action {
  readonly type = ArticleActionTypes.AddVoteOfArticlesFail;

  constructor(public payload: {error: any}) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 3 other locations - About 35 mins to fix
src/app/state/article.actions.ts on lines 235..239
src/app/state/article.actions.ts on lines 271..275
src/app/state/article.actions.ts on lines 296..300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export class AddVoteFail implements Action {
  readonly type = ArticleActionTypes.AddVoteFail;

  constructor(public payload: {error: any}) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 3 other locations - About 35 mins to fix
src/app/state/article.actions.ts on lines 208..212
src/app/state/article.actions.ts on lines 235..239
src/app/state/article.actions.ts on lines 271..275

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  if (!req.files['profileBackground'] || !req.files['profileBackground'][0]) {
    return updateUser(req, res);
  }
Severity: Minor
Found in server/routes/user.ts and 1 other location - About 35 mins to fix
server/routes/user.ts on lines 166..168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export class DeleteArticleFail implements Action {
  readonly type = ArticleActionTypes.DeleteArticleFail;

  constructor(public payload: { error: any }) {}
}
Severity: Major
Found in src/app/state/article.actions.ts and 3 other locations - About 35 mins to fix
src/app/state/article.actions.ts on lines 208..212
src/app/state/article.actions.ts on lines 235..239
src/app/state/article.actions.ts on lines 296..300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

export class DeleteDraftSuccess implements Action {
  readonly type = DraftActionTypes.DeleteDraftSuccess;

  constructor(public payload: { draft: DraftModel }) {}
}
Severity: Major
Found in src/app/drafts/state/draft.actions.ts and 7 other locations - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 61..65
src/app/drafts/state/draft.actions.ts on lines 67..71
src/app/drafts/state/draft.actions.ts on lines 80..84
src/app/state/article.actions.ts on lines 68..74
src/app/state/article.actions.ts on lines 110..114
src/app/state/article.actions.ts on lines 116..120
src/app/state/article.actions.ts on lines 265..269

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  if (!req.files['avator'] || !req.files['avator'][0]) {
    return updateProfileBackground(req, res);
  }
Severity: Minor
Found in server/routes/user.ts and 1 other location - About 35 mins to fix
server/routes/user.ts on lines 207..209

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export class DeleteDrafts implements Action {
  readonly type = DraftActionTypes.DeleteDrafts;

  constructor(public payload: { ids: string[] }) {}
}
Severity: Minor
Found in src/app/drafts/state/draft.actions.ts and 1 other location - About 35 mins to fix
src/app/state/article.actions.ts on lines 174..178

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export class DeleteArticles implements Action {
  readonly type = ArticleActionTypes.DeleteArticles;

  constructor(public payload: { ids: string[] }) {}
}
Severity: Minor
Found in src/app/state/article.actions.ts and 1 other location - About 35 mins to fix
src/app/drafts/state/draft.actions.ts on lines 141..145

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  const condition = {
    _id: new mongoose.Types.ObjectId(req.params._id),
    deleted: { $eq: null}  // 削除記事は除外
  };
Severity: Minor
Found in server/routes/draft.ts and 1 other location - About 35 mins to fix
server/routes/reply.ts on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  registerUser() {
    this.router.navigate(['/login'], { queryParams: { returnUrl: this.router.url,  }});
  }
Severity: Minor
Found in src/app/app.component.ts and 1 other location - About 35 mins to fix
src/app/app.component.ts on lines 98..100

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language