Sign upLogin

airbnb/caravel

View on GitHub
Star

Showing 3,672 of 6,072 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (this.props.canEdit && this.props.canSave) {
      return (
        <Tooltip
          id="published-dashboard-tooltip"
          placement="bottom"
Severity: Major
Found in superset-frontend/src/dashboard/components/PublishedStatus/index.jsx and 1 other location - About 2 hrs to fix
superset-frontend/src/dashboard/components/PublishedStatus/index.jsx on lines 60..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

          cy.get('@drillByModal')
            .find('.ant-breadcrumb')
            .should('be.visible')
            .and('contain', 'gender (boy)')
            .and('contain', '/')
Severity: Major
Found in superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts and 2 other locations - About 2 hrs to fix
superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts on lines 315..323
superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts on lines 462..470

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      cy.get('@drillByModal')
        .find('.ant-breadcrumb')
        .should('be.visible')
        .and('contain', 'gender (boy)')
        .and('contain', '/')
Severity: Major
Found in superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts and 2 other locations - About 2 hrs to fix
superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts on lines 315..323
superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts on lines 669..677

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      {layerCurrentlyDeleting && (
        <DeleteModal
          description={t('This action will permanently delete the layer.')}
          onConfirm={() => {
            if (layerCurrentlyDeleting) {
Severity: Major
Found in superset-frontend/src/pages/AnnotationLayerList/index.tsx and 2 other locations - About 2 hrs to fix
superset-frontend/src/pages/CssTemplateList/index.tsx on lines 263..275
superset-frontend/src/pages/SavedQueryList/index.tsx on lines 536..550

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      {templateCurrentlyDeleting && (
        <DeleteModal
          description={t('This action will permanently delete the template.')}
          onConfirm={() => {
            if (templateCurrentlyDeleting) {
Severity: Major
Found in superset-frontend/src/pages/CssTemplateList/index.tsx and 2 other locations - About 2 hrs to fix
superset-frontend/src/pages/AnnotationLayerList/index.tsx on lines 298..310
superset-frontend/src/pages/SavedQueryList/index.tsx on lines 536..550

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      cy.get('@drillByModal')
        .find('.ant-breadcrumb')
        .should('be.visible')
        .and('contain', 'gender (boy)')
        .and('contain', '/')
Severity: Major
Found in superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts and 2 other locations - About 2 hrs to fix
superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts on lines 462..470
superset-frontend/cypress-base/cypress/e2e/dashboard/drillby.test.ts on lines 669..677

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      {queryCurrentlyDeleting && (
        <DeleteModal
          description={t(
            'This action will permanently delete the saved query.',
          )}
Severity: Major
Found in superset-frontend/src/pages/SavedQueryList/index.tsx and 2 other locations - About 2 hrs to fix
superset-frontend/src/pages/AnnotationLayerList/index.tsx on lines 298..310
superset-frontend/src/pages/CssTemplateList/index.tsx on lines 263..275

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        [
          {
            name: 'label_type',
            config: {
              type: 'SelectControl',
Severity: Major
Found in superset-frontend/plugins/plugin-chart-echarts/src/Sunburst/controlPanel.tsx and 1 other location - About 2 hrs to fix
superset-frontend/plugins/plugin-chart-echarts/src/Treemap/controlPanel.tsx on lines 77..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const menuTriggerStyles = (theme: SupersetTheme) => css`
  width: ${theme.gridUnit * 8}px;
  height: ${theme.gridUnit * 8}px;
  padding: 0;
  border: 1px solid ${theme.colors.primary.dark2};
Severity: Major
Found in superset-frontend/src/components/PageHeaderWithActions/index.tsx and 1 other location - About 2 hrs to fix
superset-frontend/src/components/Select/styles.tsx on lines 112..118

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        [
          {
            name: 'label_type',
            config: {
              type: 'SelectControl',
Severity: Major
Found in superset-frontend/plugins/plugin-chart-echarts/src/Treemap/controlPanel.tsx and 1 other location - About 2 hrs to fix
superset-frontend/plugins/plugin-chart-echarts/src/Sunburst/controlPanel.tsx on lines 94..110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

jest.mock('src/components/AsyncAceEditor', () => ({
  CssEditor: ({ value, onChange }: IAceEditorProps) => (
    <textarea
      defaultValue={value}
      onChange={value => onChange?.(value.target.value)}
Severity: Major
Found in superset-frontend/src/dashboard/components/CssEditor/CssEditor.test.tsx and 1 other location - About 2 hrs to fix
superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterEditPopoverSqlTabContent/AdhocFilterEditPopoverSqlTabContent.test.tsx on lines 26..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  ${({ theme }) => `
   padding: ${theme.gridUnit * 2}px ${theme.gridUnit * 3}px;
   color: ${theme.colors.grayscale.base};
   font-size: ${theme.typography.sizes.s}px;
   cursor: default;
Severity: Major
Found in superset-frontend/src/components/Select/styles.tsx and 1 other location - About 2 hrs to fix
superset-frontend/src/components/PageHeaderWithActions/index.tsx on lines 32..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

jest.mock('src/components/AsyncAceEditor', () => ({
  SQLEditor: ({ value, onChange }: IAceEditorProps) => (
    <textarea
      defaultValue={value}
      onChange={value => onChange?.(value.target.value)}
Severity: Major
Found in superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterEditPopoverSqlTabContent/AdhocFilterEditPopoverSqlTabContent.test.tsx and 1 other location - About 2 hrs to fix
superset-frontend/src/dashboard/components/CssEditor/CssEditor.test.tsx on lines 26..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe('epochTimeXYearsAgo', () => {
  it('is a function', () => {
    expect(typeof epochTimeXYearsAgo).toBe('function');
  });
Severity: Major
Found in superset-frontend/src/utils/dates.test.js and 2 other locations - About 2 hrs to fix
superset-frontend/src/utils/dates.test.js on lines 52..60
superset-frontend/src/utils/dates.test.js on lines 62..70

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe('epochTimeXDaysAgo', () => {
  it('is a function', () => {
    expect(typeof epochTimeXDaysAgo).toBe('function');
  });
Severity: Major
Found in superset-frontend/src/utils/dates.test.js and 2 other locations - About 2 hrs to fix
superset-frontend/src/utils/dates.test.js on lines 52..60
superset-frontend/src/utils/dates.test.js on lines 72..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    expect(
      adhocFilter.equals(
        new AdhocFilter({
          expressionType: ExpressionTypes.Sql,
          subject: savedMetric.expression,
Severity: Major
Found in superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterControl/AdhocFilterControl.test.jsx and 1 other location - About 2 hrs to fix
superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterControl/AdhocFilterControl.test.jsx on lines 110..121

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  userSelectorMock.mockReturnValue({
    createdOn: '2021-04-27T18:12:38.952304',
    email: 'admin',
    firstName: 'admin',
    isActive: true,
Severity: Major
Found in superset-frontend/src/pages/DatabaseList/DatabaseList.test.jsx and 1 other location - About 2 hrs to fix
superset-frontend/src/pages/DatabaseList/DatabaseList.test.jsx on lines 225..241

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

describe('epochTimeXHoursAgo', () => {
  it('is a function', () => {
    expect(typeof epochTimeXHoursAgo).toBe('function');
  });
Severity: Major
Found in superset-frontend/src/utils/dates.test.js and 2 other locations - About 2 hrs to fix
superset-frontend/src/utils/dates.test.js on lines 62..70
superset-frontend/src/utils/dates.test.js on lines 72..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    expect(
      adhocFilter.equals(
        new AdhocFilter({
          expressionType: ExpressionTypes.Sql,
          subject: sumValueAdhocMetric.label,
Severity: Major
Found in superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterControl/AdhocFilterControl.test.jsx and 1 other location - About 2 hrs to fix
superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterControl/AdhocFilterControl.test.jsx on lines 90..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    const {
      className,
      data,
      width,
      height,
Severity: Major
Found in superset-frontend/plugins/legacy-plugin-chart-histogram/src/Histogram.jsx and 1 other location - About 2 hrs to fix
superset-frontend/plugins/legacy-plugin-chart-map-box/src/MapBox.jsx on lines 89..103

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 77.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language