Sign upLogin

avaframe/AvaFrame

View on GitHub
Star

Showing 629 of 937 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if cfg['TOPO'].getboolean('topoAdd'):
            zv = zv + cExtent*c0*(1. - np.sqrt(np.abs(1. - (np.square(yv) / (cExtent**2)))))*mask
            mask = np.zeros(np.shape(yv))
            mask[np.where(abs(yv) >= cExtent)] = 1
            zv = zv + cExtent*c0*mask
Severity: Major
Found in avaframe/in3Utils/generateTopo.py and 2 other locations - About 2 days to fix
avaframe/in3Utils/generateTopo.py on lines 258..265
avaframe/in3Utils/generateTopo.py on lines 331..338

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 220.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if cfg['TOPO'].getboolean('topoAdd'):
            superChannel = superChannel + cExtent*c0*(1. - np.sqrt(np.abs(1. - (np.square(y) / (cExtent**2)))))*mask
            # outside of the channel, add layer of channel thickness
            mask = np.zeros(np.shape(y))
            mask[np.where(abs(y) >= cExtent)] = 1
Severity: Major
Found in avaframe/in3Utils/generateTopo.py and 2 other locations - About 2 days to fix
avaframe/in3Utils/generateTopo.py on lines 111..117
avaframe/in3Utils/generateTopo.py on lines 258..265

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 220.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if cfg['TOPO'].getboolean('topoAdd'):
            zv = zv + cExtent*c0*(1. - np.sqrt(np.abs(1. - (np.square(y) / (cExtent**2)))))*mask
            # outside of the channel, add layer of channel thickness
            mask = np.zeros(np.shape(y))
            mask[np.where(abs(y) >= cExtent)] = 1
Severity: Major
Found in avaframe/in3Utils/generateTopo.py and 2 other locations - About 2 days to fix
avaframe/in3Utils/generateTopo.py on lines 111..117
avaframe/in3Utils/generateTopo.py on lines 331..338

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 220.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        ax21.plot([row['%s_LineStart' % nameEvent]+row['%s_LineDist' % nameEvent][0],
            row['%s_LineStart' % nameEvent]+row['%s_LineDist' % nameEvent][-1]],
            [row['%s_Line' % nameEvent].coords[0][2],row['%s_Line' % nameEvent].coords[-1][2]],
            '--', color='lightgray', linewidth=4, alpha=1., label='beta line [%.1f°]' % row['%s_Angle' % nameEvent])
Severity: Major
Found in avaframe/out3Plot/amaPlots.py and 1 other location - About 1 day to fix
avaframe/out3Plot/amaPlots.py on lines 98..102

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        ax21.plot([row['%s_LineStart' % nameEvent]+row['%s_LineDist' % nameEvent][0],
            row['%s_LineStart' % nameEvent]+row['%s_LineDist' % nameEvent][-1]],
            [row['%s_Line' % nameEvent].coords[0][2],
            row['%s_Line' % nameEvent].coords[-1][2]], '--', color='gray', linewidth=3, alpha=1,
            label='theta line [%.1f°]' % row['%s_Angle' % nameEvent])
Severity: Major
Found in avaframe/out3Plot/amaPlots.py and 1 other location - About 1 day to fix
avaframe/out3Plot/amaPlots.py on lines 88..91

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        Nx[n-1, m-1] = (z[n-1, m-2] - z[n-1, m-1] + z[n-2, m-2] - z[n-2, m-1]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 3 other locations - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1724..1724
avaframe/in3Utils/geoTrans.py on lines 1772..1773
avaframe/in3Utils/geoTrans.py on lines 1774..1775

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        Ny[n-1, m-1] = (z[n-2, m-1] - z[n-1, m-1] + z[n-2, m-2] - z[n-1, m-2]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 3 other locations - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1723..1723
avaframe/in3Utils/geoTrans.py on lines 1772..1773
avaframe/in3Utils/geoTrans.py on lines 1774..1775

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        Nx[n-1, m-1] = (z[n-1, m-2] - z[n-1, m-1]
                        + z[n-2, m-2] - z[n-2, m-1]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 3 other locations - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1723..1723
avaframe/in3Utils/geoTrans.py on lines 1724..1724
avaframe/in3Utils/geoTrans.py on lines 1774..1775

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        Ny[n-1, m-1] = (z[n-2, m-1] - z[n-1, m-1]
                        + z[n-2, m-2] - z[n-1, m-2]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 3 other locations - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1723..1723
avaframe/in3Utils/geoTrans.py on lines 1724..1724
avaframe/in3Utils/geoTrans.py on lines 1772..1773

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        Nx[1:n-1, m-1] = (2*(z[1:n-1, m-2] - z[1:n-1, m-1]) + z[0:n-2, m-2]
                          - z[0:n-2, m-1] + z[2:n, m-2] - z[2:n, m-1]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1697..1697

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 125.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        Ny[n-1, 1:m-1] = (2*(z[n-2, 1:m-1] - z[n-1, 1:m-1]) + z[n-2, 0:m-2] - z[n-1, 0:m-2] + z[n-2, 2:m] - z[n-1, 2:m]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1711..1711

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 125.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        Nx[1:n-1, m-1] = (2*(z[1:n-1, m-2] - z[1:n-1, m-1]) + z[0:n-2, m-2] - z[0:n-2, m-1]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1745..1746

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 125.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        Ny[n-1, 1:m-1] = (2*(z[n-2, 1:m-1] - z[n-1, 1:m-1]) + z[n-2, 0:m-2] - z[n-1, 0:m-2]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 1 day to fix
avaframe/in3Utils/geoTrans.py on lines 1760..1760

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 125.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if colorOrdering:
                cmapVal = simDF.loc[simDF['simName'] == simName, paraVar].values[0]
                if np.isnan(cmapVal) and paraVar in ['relTh', 'entTh', 'secondaryRelTh']:
                    cmapVal = simDF.loc[simDF['simName'] == simName, (paraVar+'0')].values[0]
            else:
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 1 other location - About 1 day to fix
avaframe/out3Plot/outAIMEC.py on lines 1017..1022

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if colorOrdering:
            cmapVal = simDF.loc[simDF['simName'] == simName, paraVar].values[0]
            if np.isnan(cmapVal) and paraVar in ['relTh', 'entTh', 'secondaryRelTh']:
                cmapVal = simDF.loc[simDF['simName'] == simName, (paraVar+'0')].values[0]
        else:
Severity: Major
Found in avaframe/out3Plot/outAIMEC.py and 1 other location - About 1 day to fix
avaframe/out3Plot/outAIMEC.py on lines 1057..1062

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        Nx[0, 1:m-1] = (z[0, 0:m-2] - z[0, 2:m] + z[1, 0:m-2] - z[1, 2:m]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 7 hrs to fix
avaframe/in3Utils/geoTrans.py on lines 1703..1703

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        Nx[0, 1:m-1] = (z[0, 0:m-2] - z[0, 2:m] + z[1, 1:m-1] - z[1, 2:m]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 7 hrs to fix
avaframe/in3Utils/geoTrans.py on lines 1752..1752

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        Ny[1:n-1, 0] = (z[0:n-2, 0] - z[2:n, 0] + z[1:n-1, 1] - z[2:n, 1]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 7 hrs to fix
avaframe/in3Utils/geoTrans.py on lines 1741..1741

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        Ny[1:n-1, 0] = (z[0:n-2, 0] - z[2:n, 0] + z[0:n-2, 1] - z[2:n, 1]) / csz
Severity: Major
Found in avaframe/in3Utils/geoTrans.py and 1 other location - About 7 hrs to fix
avaframe/in3Utils/geoTrans.py on lines 1693..1693

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if cfg.getboolean("projectVelocity"):
        # project velocity on inclined plane
        dataIniV = DFAtls.scalProd(dataIniVx, dataIniVy, dataIniVz, np.cos(phiRad), 0, -np.sin(phiRad))
        dataAnaV = DFAtls.scalProd(dataAnaVx, dataAnaVy, dataAnaVz, np.cos(phiRad), 0, -np.sin(phiRad))
    else:
Severity: Major
Found in avaframe/out3Plot/outAna1Plots.py and 1 other location - About 6 hrs to fix
avaframe/out3Plot/outAna1Plots.py on lines 653..659

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language