Function update-filters
has 37 lines of code (exceeds 25 allowed). Consider refactoring. Open
'update-filters': function(redrawGroup) {
if (!this.clearGroup) {
if (redrawGroup) {
dc.redrawAll(this.id);
}
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (this.invisibleChartFilters.length > 0) {
var filtersMap = {};
_.each(this.invisibleChartFilters, function(filter) {
if (filtersMap[filter] === undefined) {
filtersMap[filter] = true;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 107.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (this.invisibleChartFilters.length > 0) {
var filtersMap = {};
_.each(this.invisibleChartFilters, function(filter) {
if (filtersMap[filter] === undefined) {
filtersMap[filter] = true;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 107.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Line 11 exceeds the maximum line length of 80. Open
'attributes', 'type', 'id', 'redrawgroups', 'mappedcases', 'clearGroup', 'hasfilters', 'showedSurvivalPlot'
- Read upRead up
- Exclude checks
enforce a maximum line length (max-len)
Very long lines of code in any language can be difficult to read. In order to aid in readability and maintainability many coders have developed a convention to limit lines of code to X number of characters (traditionally 80 characters).
var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" }, "difficult": "to read" }; // very long
Rule Details
This rule enforces a maximum line length to increase code readability and maintainability.
Note: This rule calculates the length of a line via code points, not characters. That means if you use a double-byte character in your code, it will count as 2 code points instead of 1, and 2 will be used to calculate line length. This is a technical limitation of JavaScript that is made easier with ES2015, and we will look to update this when ES2015 is available in Node.js.
Options
This rule has a number or object option:
-
"code"
(default80
) enforces a maximum line length -
"tabWidth"
(default4
) specifies the character width for tab characters -
"comments"
enforces a maximum line length for comments; defaults to value ofcode
-
"ignorePattern"
ignores lines matching a regular expression; can only match a single line and need to be double escaped when written in YAML or JSON -
"ignoreComments": true
ignores all trailing comments and comments on their own line -
"ignoreTrailingComments": true
ignores only trailing comments -
"ignoreUrls": true
ignores lines that contain a URL
code
Examples of incorrect code for this rule with the default { "code": 80 }
option:
/*eslint max-len: ["error", 80]*/
var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" }, "difficult": "to read" };
Examples of correct code for this rule with the default { "code": 80 }
option:
/*eslint max-len: ["error", 80]*/
var foo = {
"bar": "This is a bar.",
"baz": { "qux": "This is a qux" },
"easier": "to read"
};
tabWidth
Examples of incorrect code for this rule with the default { "tabWidth": 4 }
option:
/*eslint max-len: ["error", 80, 4]*/
\t \t var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" } };
Examples of correct code for this rule with the default { "tabWidth": 4 }
option:
/*eslint max-len: ["error", 80, 4]*/
\t \t var foo = {
\t \t \t \t "bar": "This is a bar.",
\t \t \t \t "baz": { "qux": "This is a qux" }
\t \t };
comments
Examples of incorrect code for this rule with the { "comments": 65 }
option:
/*eslint max-len: ["error", { "comments": 65 }]*/
/**
* This is a comment that violates the maximum line length we have specified
**/
ignoreComments
Examples of correct code for this rule with the { "ignoreComments": true }
option:
/*eslint max-len: ["error", { "ignoreComments": true }]*/
/**
* This is a really really really really really really really really really long comment
**/
ignoreTrailingComments
Examples of correct code for this rule with the { "ignoreTrailingComments": true }
option:
/*eslint max-len: ["error", { "ignoreTrailingComments": true }]*/
var foo = 'bar'; // This is a really really really really really really really long comment
ignoreUrls
Examples of correct code for this rule with the { "ignoreUrls": true }
option:
/*eslint max-len: ["error", { "ignoreUrls": true }]*/
var url = 'https://www.example.com/really/really/really/really/really/really/really/long';
ignorePattern
Examples of correct code for this rule with the { "ignorePattern": true }
option:
/*eslint max-len: ["error", { "ignorePattern": "^\\s*var\\s.+=\\s*require\\s*\\(/" }]*/
var dep = require('really/really/really/really/really/really/really/really/long/module');
Related Rules
- [complexity](complexity.md)
- [max-depth](max-depth.md)
- [max-nested-callbacks](max-nested-callbacks.md)
- [max-params](max-params.md)
- [max-statements](max-statements.md) Source: http://eslint.org/docs/rules/
Line 9 exceeds the maximum line length of 80. Open
':showed-survival-plot="showedSurvivalPlot" v-for="attribute in attributes"></div>',
- Read upRead up
- Exclude checks
enforce a maximum line length (max-len)
Very long lines of code in any language can be difficult to read. In order to aid in readability and maintainability many coders have developed a convention to limit lines of code to X number of characters (traditionally 80 characters).
var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" }, "difficult": "to read" }; // very long
Rule Details
This rule enforces a maximum line length to increase code readability and maintainability.
Note: This rule calculates the length of a line via code points, not characters. That means if you use a double-byte character in your code, it will count as 2 code points instead of 1, and 2 will be used to calculate line length. This is a technical limitation of JavaScript that is made easier with ES2015, and we will look to update this when ES2015 is available in Node.js.
Options
This rule has a number or object option:
-
"code"
(default80
) enforces a maximum line length -
"tabWidth"
(default4
) specifies the character width for tab characters -
"comments"
enforces a maximum line length for comments; defaults to value ofcode
-
"ignorePattern"
ignores lines matching a regular expression; can only match a single line and need to be double escaped when written in YAML or JSON -
"ignoreComments": true
ignores all trailing comments and comments on their own line -
"ignoreTrailingComments": true
ignores only trailing comments -
"ignoreUrls": true
ignores lines that contain a URL
code
Examples of incorrect code for this rule with the default { "code": 80 }
option:
/*eslint max-len: ["error", 80]*/
var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" }, "difficult": "to read" };
Examples of correct code for this rule with the default { "code": 80 }
option:
/*eslint max-len: ["error", 80]*/
var foo = {
"bar": "This is a bar.",
"baz": { "qux": "This is a qux" },
"easier": "to read"
};
tabWidth
Examples of incorrect code for this rule with the default { "tabWidth": 4 }
option:
/*eslint max-len: ["error", 80, 4]*/
\t \t var foo = { "bar": "This is a bar.", "baz": { "qux": "This is a qux" } };
Examples of correct code for this rule with the default { "tabWidth": 4 }
option:
/*eslint max-len: ["error", 80, 4]*/
\t \t var foo = {
\t \t \t \t "bar": "This is a bar.",
\t \t \t \t "baz": { "qux": "This is a qux" }
\t \t };
comments
Examples of incorrect code for this rule with the { "comments": 65 }
option:
/*eslint max-len: ["error", { "comments": 65 }]*/
/**
* This is a comment that violates the maximum line length we have specified
**/
ignoreComments
Examples of correct code for this rule with the { "ignoreComments": true }
option:
/*eslint max-len: ["error", { "ignoreComments": true }]*/
/**
* This is a really really really really really really really really really long comment
**/
ignoreTrailingComments
Examples of correct code for this rule with the { "ignoreTrailingComments": true }
option:
/*eslint max-len: ["error", { "ignoreTrailingComments": true }]*/
var foo = 'bar'; // This is a really really really really really really really long comment
ignoreUrls
Examples of correct code for this rule with the { "ignoreUrls": true }
option:
/*eslint max-len: ["error", { "ignoreUrls": true }]*/
var url = 'https://www.example.com/really/really/really/really/really/really/really/long';
ignorePattern
Examples of correct code for this rule with the { "ignorePattern": true }
option:
/*eslint max-len: ["error", { "ignorePattern": "^\\s*var\\s.+=\\s*require\\s*\\(/" }]*/
var dep = require('really/really/really/really/really/really/really/really/long/module');
Related Rules
- [complexity](complexity.md)
- [max-depth](max-depth.md)
- [max-nested-callbacks](max-nested-callbacks.md)
- [max-params](max-params.md)
- [max-statements](max-statements.md) Source: http://eslint.org/docs/rules/