Sign upLogin

danielwippermann/resol-vbus

View on GitHub
Star

Showing 345 of 558 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        switch (targetUnitCode) {
        case 'DegreesCelsius':
            // nop
            break;
        case 'DegreesFahrenheit':
Severity: Minor
Found in src/specification.js and 1 other location - About 50 mins to fix
src/specification.js on lines 778..787

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    lt(refValue, callback) {
        return this._check(callback, (value, valueInfo) => {
            const normalizedRefValue = this._normalizeValue(refValue, valueInfo);
            return (value < normalizedRefValue);
        });
Severity: Major
Found in src/base-configuration-optimizer.js and 5 other locations - About 50 mins to fix
src/base-configuration-optimizer.js on lines 64..69
src/base-configuration-optimizer.js on lines 71..76
src/base-configuration-optimizer.js on lines 85..90
src/base-configuration-optimizer.js on lines 92..97
src/base-configuration-optimizer.js on lines 99..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        switch (sourceUnitCode) {
        case 'Bars':
            // nop
            break;
        case 'PoundsForcePerSquareInch':
Severity: Minor
Found in src/specification.js and 1 other location - About 50 mins to fix
src/specification.js on lines 891..900

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        switch (sourceUnitCode) {
        case 'DegreesCelsius':
            // nop
            break;
        case 'DegreesFahrenheit':
Severity: Minor
Found in src/specification.js and 1 other location - About 50 mins to fix
src/specification.js on lines 789..798

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        switch (targetUnitCode) {
        case 'Bars':
            // nop
            break;
        case 'PoundsForcePerSquareInch':
Severity: Minor
Found in src/specification.js and 1 other location - About 50 mins to fix
src/specification.js on lines 880..889

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    const supportedPacket1 = new Packet({
        timestamp,
        channel: 0,
        destinationAddress: 0x0010,  // DFA
        sourceAddress: 0x7321,  // Vitosolic 200 [Regler]
Severity: Minor
Found in examples/vbustouch-proxy/index.js and 1 other location - About 45 mins to fix
examples/vbustouch-proxy/index.js on lines 210..217

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    const supportedPacket2 = new Packet({
        timestamp,
        channel: 0,
        destinationAddress: 0x0010,  // DFA
        sourceAddress: 0x7326,  // Vitosolic 200 [WMZ1]
Severity: Minor
Found in examples/vbustouch-proxy/index.js and 1 other location - About 45 mins to fix
examples/vbustouch-proxy/index.js on lines 198..205

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ((this.stats.minTimestamp === null) || (this.stats.minTimestamp > timestamp)) {
            this.stats.minTimestamp = timestamp;
        }
Severity: Minor
Found in src/dlx-json-converter.js and 1 other location - About 45 mins to fix
src/dlx-json-converter.js on lines 98..100

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    const onOutputConverterReadable = function() {
        let chunk;
        while ((chunk = outputConverter.read()) != null) {
            chunks.push(chunk);
        }
Severity: Minor
Found in examples/json-live-data-server/index.js and 1 other location - About 45 mins to fix
examples/vbustouch-proxy/index.js on lines 296..301

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        const onOutputConverterReadable = function() {
            let chunk;
            while ((chunk = outputConverter.read()) != null) {
                chunks.push(chunk);
            }
Severity: Minor
Found in examples/vbustouch-proxy/index.js and 1 other location - About 45 mins to fix
examples/json-live-data-server/index.js on lines 225..230

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ((this.stats.maxTimestamp === null) || (this.stats.maxTimestamp < timestamp)) {
            this.stats.maxTimestamp = timestamp;
        }
Severity: Minor
Found in src/dlx-json-converter.js and 1 other location - About 45 mins to fix
src/dlx-json-converter.js on lines 95..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        value.check(hasMinKollektorCount(1), () => {
            $(/^Solar_Kol1_.*/).ignore();
            $(/^Solar_Wf1_(Roehrenkollektor|Bypass|Frostschutz)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js and 5 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 63..66
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 67..70
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 82..85
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 86..89
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 90..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        value.check(hasMinSpeicherCount(5), () => {
            $(/^Solar_Sp5_.*/).ignore();
            $(/^Solar_Wf5_(ExtWT)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js and 5 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 59..62
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 63..66
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 67..70
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 82..85
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 86..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        value.check(hasMinKollektorCount(3), () => {
            $(/^Solar_Kol3_.*/).ignore();
            $(/^Solar_Wf3_(Roehrenkollektor|Bypass|Frostschutz)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js and 5 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 59..62
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 63..66
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 82..85
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 86..89
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 90..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        value.check(hasMinSpeicherCount(4), () => {
            $(/^Solar_Sp4_.*/).ignore();
            $(/^Solar_Wf4_(ExtWT)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js and 5 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 59..62
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 63..66
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 67..70
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 82..85
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 90..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        value.lt(30, () => {
            $(/^Solar_Sp2_.*/).ignore();
            // TODO: Ladelogik
            $(/^Solar_Wf2_(ExtWT)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-bx-plus-xxx-configuration-optimizer.js and 2 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-112-configuration-optimizer.js on lines 58..62
src/configuration-optimizers/resol-deltasol-slt-102-configuration-optimizer.js on lines 46..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        value.check(hasMinKollektorCount(2), () => {
            $(/^Solar_Kol2_.*/).ignore();
            $(/^Solar_Wf2_(Roehrenkollektor|Bypass|Frostschutz)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js and 5 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 59..62
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 67..70
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 82..85
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 86..89
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 90..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        value.lt(30, () => {
            $(/^Solar_Sp2_.*/).ignore();
            // TODO: Ladelogik
            $(/^Solar_Wf2_(ExtWT)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-112-configuration-optimizer.js and 2 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-bx-plus-xxx-configuration-optimizer.js on lines 54..58
src/configuration-optimizers/resol-deltasol-slt-102-configuration-optimizer.js on lines 46..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        value.lt(30, () => {
            $(/^Solar_Sp2_.*/).ignore();
            // TODO: Ladelogik
            $(/^Solar_Wf2_(ExtWT)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-slt-102-configuration-optimizer.js and 2 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-bx-plus-xxx-configuration-optimizer.js on lines 54..58
src/configuration-optimizers/resol-deltasol-mx-112-configuration-optimizer.js on lines 58..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        value.check(hasMinSpeicherCount(3), () => {
            $(/^Solar_Sp3_.*/).ignore();
            $(/^Solar_Wf3_(ExtWT)_.*/).ignore();
        });
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js and 5 other locations - About 40 mins to fix
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 59..62
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 63..66
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 67..70
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 86..89
src/configuration-optimizers/resol-deltasol-mx-2xx-configuration-optimizer.js on lines 90..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language