Sign upLogin

danielwippermann/resol-vbus

View on GitHub
Star

Showing 345 of 557 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    optimizeConfiguration($) {
        this.optimizeModuleConfiguration($);
        this.optimizeSolarConfiguration($);
        this.optimizeSolarWfConfiguration($);
        this.optimizeAnlageWfConfiguration($);
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-bx-plus-xxx-configuration-optimizer.js and 1 other location - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-mx-112-configuration-optimizer.js on lines 12..20

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 86.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ((rinfo.family === 'IPv6') && (rinfo.port === bcastPort) && (msg.length >= replyString.length)) {
                const msgString = msg.slice(0, replyString.length).toString();
                if (msgString === replyString) {
                    const { address } = rinfo;
                    if (addressList.indexOf(address) < 0) {
Severity: Major
Found in src/tcp-data-source-provider.js and 1 other location - About 2 hrs to fix
src/tcp-data-source-provider.js on lines 265..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 85.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ((rinfo.family === 'IPv4') && (rinfo.port === 7053) && (msg.length >= replyString.length)) {
                const msgString = msg.slice(0, replyString.length).toString();
                if (msgString === replyString) {
                    const { address } = rinfo;
                    if (addressList.indexOf(address) < 0) {
Severity: Major
Found in src/tcp-data-source-provider.js and 1 other location - About 2 hrs to fix
src/tcp-data-source-provider.js on lines 175..183

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 85.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        for (let tries = 0; tries < options.tries; tries++) {
            const queryBuffer = Buffer.from(queryString);
            socket.send(queryBuffer, 0, queryBuffer.length, bcastPort, bcastAddress);

            await promisify(cb => setTimeout(cb, options.timeout));
Severity: Major
Found in src/tcp-data-source-provider.js and 1 other location - About 2 hrs to fix
src/tcp-data-source-provider.js on lines 280..285

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        for (let tries = 0; tries < options.tries; tries++) {
            const queryBuffer = Buffer.from(queryString);
            socket.send(queryBuffer, 0, queryBuffer.length, bcastPort, bcastAddress);

            await promisify(cb => setTimeout(cb, options.timeout));
Severity: Major
Found in src/tcp-data-source-provider.js and 1 other location - About 2 hrs to fix
src/tcp-data-source-provider.js on lines 191..196

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                        } else if (majorVersion === 2) {
                            if (this.listenerCount('datagram') > 0) {
                                const datagram = Datagram.fromLiveBuffer(buffer, start, index);
                                datagram.timestamp = new Date(timestamp);
                                datagram.channel = this.channel;
Severity: Major
Found in src/connection.js and 2 other locations - About 2 hrs to fix
src/connection.js on lines 216..237
src/connection.js on lines 230..237

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                        if (majorVersion === 1) {
                            if (this.listenerCount('packet') > 0) {
                                const packet = Packet.fromLiveBuffer(buffer, start, index);
                                packet.timestamp = new Date(timestamp);
                                packet.channel = this.channel;
Severity: Major
Found in src/connection.js and 2 other locations - About 2 hrs to fix
src/connection.js on lines 223..237
src/connection.js on lines 230..237

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                        } else if (majorVersion === 3) {
                            if (this.listenerCount('telegram') > 0) {
                                const telegram = Telegram.fromLiveBuffer(buffer, start, index);
                                telegram.timestamp = new Date(timestamp);
                                telegram.channel = this.channel;
Severity: Major
Found in src/connection.js and 2 other locations - About 2 hrs to fix
src/connection.js on lines 216..237
src/connection.js on lines 223..237

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        {
            "type": {
                "valueTexts": [
                    {
                        "value": 0,
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 1 other location - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1934..1957

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        {
            "type": {
                "valueTexts": [
                    {
                        "value": 0,
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 1 other location - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1958..1981

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        switch (sourceUnitCode) {
        case 'Seconds':
            // nop
            break;
        case 'Minutes':
Severity: Major
Found in src/specification.js and 1 other location - About 2 hrs to fix
src/specification.js on lines 1035..1050

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        switch (targetUnitCode) {
        case 'Seconds':
            // nop
            break;
        case 'Minutes':
Severity: Major
Found in src/specification.js and 1 other location - About 2 hrs to fix
src/specification.js on lines 1018..1033

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "2"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "1"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "1"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "0,5"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "1"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "2"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "1"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1427..1445
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        {
            "type": {
                "quants": [
                    "2"
                ],
Severity: Major
Found in src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js and 7 other locations - About 2 hrs to fix
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 888..906
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 907..925
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1408..1426
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1458..1476
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1477..1495
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1508..1526
src/configuration-optimizers/resol-deltasol-cs-plus-110-data.js on lines 1527..1545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language