Sign upLogin

etnbrd/flx-compiler

View on GitHub
Star

Showing 606 of 1,229 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      var w = (edge[prefix + 'size'] || 1) / 2,
          x1 = source[prefix + 'x'],
          y1 = source[prefix + 'y'],
          x2 = target[prefix + 'x'],
          y2 = target[prefix + 'y'],
Severity: Major
Found in prototypes/express/src/console/sigma/src/renderers/webgl/sigma.webgl.edges.fast.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/src/renderers/webgl/sigma.webgl.edges.def.js on lines 19..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 84.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      var w = (edge[prefix + 'size'] || 1) / 2,
          x1 = source[prefix + 'x'],
          y1 = source[prefix + 'y'],
          x2 = target[prefix + 'x'],
          y2 = target[prefix + 'y'],
Severity: Major
Found in prototypes/express/src/console/sigma/src/renderers/webgl/sigma.webgl.edges.def.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/src/renderers/webgl/sigma.webgl.edges.fast.js on lines 16..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 84.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

flx.register("view", function(msg) {
  msg.view = msg.uid + "[" + msg.count + "]";
  msg.uid = undefined;
  msg.count = undefined;
  return this.m("output", msg);
Severity: Major
Found in prototypes/fluxions/count_setImmediate.js and 3 other locations - About 2 hrs to fix
prototypes/fluxions/count_chain.js on lines 12..17
prototypes/fluxions/count_nextTick.js on lines 12..17
prototypes/fluxions/count_setTimeout.js on lines 12..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

flx.register("view", function(msg) {
  msg.view = msg.uid + "[" + msg.count + "]";
  msg.uid = undefined;
  msg.count = undefined;
  return this.m("output", msg);
Severity: Major
Found in prototypes/fluxions/count_chain.js and 3 other locations - About 2 hrs to fix
prototypes/fluxions/count_nextTick.js on lines 12..17
prototypes/fluxions/count_setImmediate.js on lines 12..17
prototypes/fluxions/count_setTimeout.js on lines 12..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

flx.register("view", function(msg) {
  msg.view = msg.uid + "[" + msg.count + "]";
  msg.uid = undefined;
  msg.count = undefined;
  return this.m("output", msg);
Severity: Major
Found in prototypes/fluxions/count_setTimeout.js and 3 other locations - About 2 hrs to fix
prototypes/fluxions/count_chain.js on lines 12..17
prototypes/fluxions/count_nextTick.js on lines 12..17
prototypes/fluxions/count_setImmediate.js on lines 12..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

flx.register("view", function(msg) {
  msg.view = msg.uid + "[" + msg.count + "]";
  msg.uid = undefined;
  msg.count = undefined;
  return this.m("output", msg);
Severity: Major
Found in prototypes/fluxions/count_nextTick.js and 3 other locations - About 2 hrs to fix
prototypes/fluxions/count_chain.js on lines 12..17
prototypes/fluxions/count_setImmediate.js on lines 12..17
prototypes/fluxions/count_setTimeout.js on lines 12..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    while (++i <= n) {
      pi = points[i];
      px.shift();
      px.push(pi[0]);
      py.shift();
Severity: Major
Found in lib/graph-printer/old/bower_components/d3/d3.js and 1 other location - About 2 hrs to fix
lib/graph-printer/old/bower_components/d3/d3.js on lines 7994..8001

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      path += "Q" + (p[0] - t0[0] * 2 / 3) + "," + (p[1] - t0[1] * 2 / 3) + "," + p[0] + "," + p[1];
Severity: Major
Found in lib/graph-printer/old/bower_components/d3/d3.js and 1 other location - About 2 hrs to fix
lib/graph-printer/old/bower_components/d3/d3.js on lines 7954..7954

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    while (++i < n) {
      pi = points[i];
      px.shift();
      px.push(pi[0]);
      py.shift();
Severity: Major
Found in lib/graph-printer/old/bower_components/d3/d3.js and 1 other location - About 2 hrs to fix
lib/graph-printer/old/bower_components/d3/d3.js on lines 7972..7979

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      path += "Q" + (p[0] + t[0] * 2 / 3) + "," + (p[1] + t[1] * 2 / 3) + "," + lp[0] + "," + lp[1];
Severity: Major
Found in lib/graph-printer/old/bower_components/d3/d3.js and 1 other location - About 2 hrs to fix
lib/graph-printer/old/bower_components/d3/d3.js on lines 7937..7937

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  function __extend() {
    var i,
        k,
        res = {},
        l = arguments.length;
Severity: Major
Found in prototypes/express/src/console/sigma/src/conrad.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/src/utils/sigma.utils.js on lines 45..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  sigma.utils.extend = function() {
    var i,
        k,
        res = {},
        l = arguments.length;
Severity: Major
Found in prototypes/express/src/console/sigma/src/utils/sigma.utils.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/src/conrad.js on lines 875..886

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        Overview.prototype._catSize = function (data) {
          var startindex, term;
          term = 'serializedlength';
          startindex = data.indexOf(term);
          startindex += term.length + 1;
Severity: Major
Found in test-set/redis_key_overview-master/index-flx.js and 1 other location - About 2 hrs to fix
test-set/redis_key_overview-master/modules/keyoverview.js on lines 473..479

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    Overview.prototype._catSize = function(data) {
      var startindex, term;
      term = "serializedlength";
      startindex = data.indexOf(term);
      startindex += term.length + 1;
Severity: Major
Found in test-set/redis_key_overview-master/modules/keyoverview.js and 1 other location - About 2 hrs to fix
test-set/redis_key_overview-master/index-flx.js on lines 505..511

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        } else {
          if (logAttr) {
            if (distributedAttr) {
              return new this.logAttraction_degreeDistributed(c);
            } else {
Severity: Major
Found in prototypes/express/src/console/sigma/plugins/sigma.layout.forceAtlas2/sigma.layout.forceAtlas2.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/plugins/sigma.layout.forceAtlas2/sigma.layout.forceAtlas2.js on lines 431..445

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (adjustBySize) {
          if (logAttr) {
            if (distributedAttr) {
              return new this.logAttraction_degreeDistributed_antiCollision(c);
            } else {
Severity: Major
Found in prototypes/express/src/console/sigma/plugins/sigma.layout.forceAtlas2/sigma.layout.forceAtlas2.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/plugins/sigma.layout.forceAtlas2/sigma.layout.forceAtlas2.js on lines 445..459

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if (_settings('mouseEnabled'))
        _self.dispatchEvent('click', {
          x: sigma.utils.getX(e) - e.target.width / 2,
          y: sigma.utils.getY(e) - e.target.height / 2
        });
Severity: Major
Found in prototypes/express/src/console/sigma/src/captors/sigma.captors.mouse.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/src/captors/sigma.captors.mouse.js on lines 78..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if (_settings('mouseEnabled'))
        _self.dispatchEvent('mousemove', {
          x: sigma.utils.getX(e) - e.target.width / 2,
          y: sigma.utils.getY(e) - e.target.height / 2
        });
Severity: Major
Found in prototypes/express/src/console/sigma/src/captors/sigma.captors.mouse.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/sigma/src/captors/sigma.captors.mouse.js on lines 221..225

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  if (e.t > 0) {
    color = one.color('rgb(255, 0, 73)').value(- 1 + e.t * 0.05, true).css();
    e.t -= 1;
  }
  else
Severity: Major
Found in prototypes/express/src/console/script.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/script.js on lines 255..260

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 79.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  if (e.t > 0) {
    color = one.color('rgb(255, 0, 73)').value(- 1 + e.t * 0.05, true).css();
    e.t -= 1;
  }
  else
Severity: Major
Found in prototypes/express/src/console/script.js and 1 other location - About 2 hrs to fix
prototypes/express/src/console/script.js on lines 200..205

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 79.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language