Sign upLogin

guni12/bbbnode

View on GitHub
Star

Showing 24 of 24 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

router.get("/",
    ah.asyncHandler(async (req, res, next) => {
        await swt.sensorsWithTime(req, res, next);
        if (req.content) {
            await update.updateSensors(req, res, next);
Severity: Major
Found in routes/update-temperatures.js and 1 other location - About 2 hrs to fix
routes/init-gpios.js on lines 7..15

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 84.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

router.get("/",
    ah.asyncHandler(async (req, res, next) => {
        await pins.initPins(req, res, next);
        if (req.printPins) {
            await ig.insert(req, res, next);
Severity: Major
Found in routes/init-gpios.js and 1 other location - About 2 hrs to fix
routes/update-temperatures.js on lines 7..15

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 84.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

router.get("/:id?",
    ah.asyncHandler(async (req, res, next) => {
        await sensors.getAll(req, res, next, sensorsParams);
        if (req.sensors) { res.json(req.sensors); }
    }),
Severity: Major
Found in routes/show-sensors.js and 2 other locations - About 1 hr to fix
routes/all-rooms.js on lines 8..13
routes/show-gpios.js on lines 7..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

router.get('/:id?',
    ah.asyncHandler(async (req, res, next) => {
        await rooms.getAll(req, res, next, roomsParams);
        if (req.rooms) { res.json(req.rooms); }
    })
Severity: Major
Found in routes/all-rooms.js and 2 other locations - About 1 hr to fix
routes/show-gpios.js on lines 7..12
routes/show-sensors.js on lines 7..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

router.get("/:id?",
    ah.asyncHandler(async (req, res, next) => {
        await gpios.getAll(req, res, next, gpiosParams);
        if (req.gpios) { res.json(req.gpios); }
    }),
Severity: Major
Found in routes/show-gpios.js and 2 other locations - About 1 hr to fix
routes/all-rooms.js on lines 8..13
routes/show-sensors.js on lines 7..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

router.post("/",
    (req, res, next) => prep.hascred(req, res, next, params),
    (req, res, next) => edit.update(req, res, next, params2 ),
    (req, res) => res.json(req.content)
);
Severity: Major
Found in routes/edit-settings.js and 2 other locations - About 1 hr to fix
routes/edit-room.js on lines 9..13
routes/edit-sensor.js on lines 9..13

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

router.post("/",
    (req, res, next) => prep.hascred(req, res, next, params),
    (req, res, next) => edit.update(req, res, next, params2),
    (req, res) => res.json(req.content),
);
Severity: Major
Found in routes/edit-room.js and 2 other locations - About 1 hr to fix
routes/edit-sensor.js on lines 9..13
routes/edit-settings.js on lines 9..13

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

router.post("/",
    (req, res, next) => prep.hascred(req, res, next, params),
    (req, res, next) => edit.update(req, res, next, params2 ),
    (req, res) => res.json(req.content)
);
Severity: Major
Found in routes/edit-sensor.js and 2 other locations - About 1 hr to fix
routes/edit-room.js on lines 9..13
routes/edit-settings.js on lines 9..13

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

self.addEventListener('message', (event) => {
  if (event.data && event.data.type === 'SKIP_WAITING') {
    self.skipWaiting();
  }
});
Severity: Major
Found in scripts/var/www/react/html/service-worker.js and 1 other location - About 1 hr to fix
scripts/var/www/nologin/html/service-worker.js on lines 20..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

self.addEventListener('message', (event) => {
  if (event.data && event.data.type === 'SKIP_WAITING') {
    self.skipWaiting();
  }
});
Severity: Major
Found in scripts/var/www/nologin/html/service-worker.js and 1 other location - About 1 hr to fix
scripts/var/www/react/html/service-worker.js on lines 20..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    if (!req.body.column || !req.body.value) {
        let obj = reg.reterror(401, params.where, params.text);

        return res.status(401).json(obj);
    }
Severity: Minor
Found in public/javascripts/prepare.js and 2 other locations - About 40 mins to fix
public/javascripts/db/edit-gpio.js on lines 5..9
public/javascripts/db/edit-sqlite.js on lines 15..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            if (err) {
                let obj = reg.reterror(500, par.where, err.message);

                return res.status(500).json(obj);
            }
Severity: Minor
Found in public/javascripts/db/edit-sqlite.js and 2 other locations - About 40 mins to fix
public/javascripts/db/edit-gpio.js on lines 5..9
public/javascripts/prepare.js on lines 5..9

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    if (!req.body || !req.body.gpio || !req.body.mode) {
        let obj = reg.reterror(401, params.where, params.text);

        return res.status(401).json(obj);
    }
Severity: Minor
Found in public/javascripts/db/edit-gpio.js and 2 other locations - About 40 mins to fix
public/javascripts/db/edit-sqlite.js on lines 15..19
public/javascripts/prepare.js on lines 5..9

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        if (gpiolist.length > 0) {
            req.printPins = gpiolist;
        } else {
            let text = "Could not find any 1-Wire sensors to list";
            let obj = th.throwerror("Error", 500, "initPins", text);
Severity: Major
Found in public/javascripts/gpio/initPins.js and 7 other locations - About 35 mins to fix
public/javascripts/gpio/initGpios.js on lines 6..22
public/javascripts/gpio/update-gpio.js on lines 13..20
public/javascripts/hour-control/updatePin.js on lines 13..20
public/javascripts/login/register.js on lines 24..32
public/javascripts/printFile.js on lines 6..14
public/javascripts/readFile.js on lines 6..13
public/javascripts/sensors/sensorsWithTime.js on lines 13..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        if (list.length > 0) {
            list.push(item);
            req.content = list;
        } else {
            let text = "ds18b20-raspi kan inte nå sensorerna";
Severity: Major
Found in public/javascripts/sensors/sensorsWithTime.js and 7 other locations - About 35 mins to fix
public/javascripts/gpio/initGpios.js on lines 6..22
public/javascripts/gpio/initPins.js on lines 10..17
public/javascripts/gpio/update-gpio.js on lines 13..20
public/javascripts/hour-control/updatePin.js on lines 13..20
public/javascripts/login/register.js on lines 24..32
public/javascripts/printFile.js on lines 6..14
public/javascripts/readFile.js on lines 6..13

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if (!req.body.column || !req.body.value) {
            let text = "Email eller lösenord saknas";
            let obj = th.throwerror("Error", 401, "prepare", text);

            throw { obj, error: new Error() };
Severity: Minor
Found in public/javascripts/login/prepare.js and 2 other locations - About 35 mins to fix
public/javascripts/db/getOneRow.js on lines 11..19
public/javascripts/hour-control/updateOne.js on lines 12..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        if (req.printPins) {
            let len = req.printPins.length;

            for (let i = 0; i < len; i++) {
                let sql = "INSERT INTO gpios (gpio, status, mode) VALUES (" +
Severity: Major
Found in public/javascripts/gpio/initGpios.js and 7 other locations - About 35 mins to fix
public/javascripts/gpio/initPins.js on lines 10..17
public/javascripts/gpio/update-gpio.js on lines 13..20
public/javascripts/hour-control/updatePin.js on lines 13..20
public/javascripts/login/register.js on lines 24..32
public/javascripts/printFile.js on lines 6..14
public/javascripts/readFile.js on lines 6..13
public/javascripts/sensors/sensorsWithTime.js on lines 13..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

                if (!err) {
                    insert.insert(req, res, [req.body.column, hash]);
                    return undefined;
                } else {
                    let text = "Bcrypt - hash problem";
Severity: Major
Found in public/javascripts/login/register.js and 7 other locations - About 35 mins to fix
public/javascripts/gpio/initGpios.js on lines 6..22
public/javascripts/gpio/initPins.js on lines 10..17
public/javascripts/gpio/update-gpio.js on lines 13..20
public/javascripts/hour-control/updatePin.js on lines 13..20
public/javascripts/printFile.js on lines 6..14
public/javascripts/readFile.js on lines 6..13
public/javascripts/sensors/sensorsWithTime.js on lines 13..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

        if (params.what && params.where) {
            req[params.what] = await fs.readFile(params.where, 'utf-8');
        } else {
            let text = 'Fil eller parameter saknas.';
            let obj = th.throwerror("Error", 400, "readFile", text);
Severity: Major
Found in public/javascripts/readFile.js and 7 other locations - About 35 mins to fix
public/javascripts/gpio/initGpios.js on lines 6..22
public/javascripts/gpio/initPins.js on lines 10..17
public/javascripts/gpio/update-gpio.js on lines 13..20
public/javascripts/hour-control/updatePin.js on lines 13..20
public/javascripts/login/register.js on lines 24..32
public/javascripts/printFile.js on lines 6..14
public/javascripts/sensors/sensorsWithTime.js on lines 13..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

    if (stat === 0 || stat === 1) {
        await eg.update(req, res, next, params);
    } else {
        let text = "Gpio pinne kunde ej nås";
        let obj = th.throwerror("Error", 500, "updatePin", text);
Severity: Major
Found in public/javascripts/hour-control/updatePin.js and 7 other locations - About 35 mins to fix
public/javascripts/gpio/initGpios.js on lines 6..22
public/javascripts/gpio/initPins.js on lines 10..17
public/javascripts/gpio/update-gpio.js on lines 13..20
public/javascripts/login/register.js on lines 24..32
public/javascripts/printFile.js on lines 6..14
public/javascripts/readFile.js on lines 6..13
public/javascripts/sensors/sensorsWithTime.js on lines 13..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language