Function main
has 44 lines of code (exceeds 25 allowed). Consider refactoring. Open
function main() {
//your widget code goes here
jQuery(document).ready(function ($) {
The body of a for-in should be wrapped in an if statement to filter unwanted properties from the prototype. Open
for (var i in allScripts) {
- Read upRead up
- Exclude checks
Require Guarding for-in (guard-for-in)
Looping over objects with a for in
loop will include properties that are inherited through the prototype chain. This behavior can lead to unexpected items in your for loop.
for (key in foo) {
doSomething(key);
}
Note that simply checking foo.hasOwnProperty(key)
is likely to cause an error in some cases; see [no-prototype-builtins](no-prototype-builtins.md).
Rule Details
This rule is aimed at preventing unexpected behavior that could arise from using a for in
loop without filtering the results in the loop. As such, it will warn when for in
loops do not filter their results with an if
statement.
Examples of incorrect code for this rule:
/*eslint guard-for-in: "error"*/
for (key in foo) {
doSomething(key);
}
Examples of correct code for this rule:
/*eslint guard-for-in: "error"*/
for (key in foo) {
if (Object.prototype.hasOwnProperty.call(foo, key)) {
doSomething(key);
}
if ({}.hasOwnProperty.call(foo, key)) {
doSomething(key);
}
}
Related Rules
- [no-prototype-builtins](no-prototype-builtins.md)
Further Reading
Expected '===' and instead saw '=='. Open
if (this.readyState == 'complete' || this.readyState == 'loaded') {
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
Expected '===' and instead saw '=='. Open
if (this.readyState == 'complete' || this.readyState == 'loaded') {
- Read upRead up
- Exclude checks
Require === and !== (eqeqeq)
It is considered good practice to use the type-safe equality operators ===
and !==
instead of their regular counterparts ==
and !=
.
The reason for this is that ==
and !=
do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm.
For instance, the following statements are all considered true
:
[] == false
[] == ![]
3 == "03"
If one of those occurs in an innocent-looking statement such as a == b
the actual problem is very difficult to spot.
Rule Details
This rule is aimed at eliminating the type-unsafe equality operators.
Examples of incorrect code for this rule:
/*eslint eqeqeq: "error"*/
if (x == 42) { }
if ("" == text) { }
if (obj.getStuff() != undefined) { }
The --fix
option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof
expression, or if both operands are literals with the same type.
Options
always
The "always"
option (default) enforces the use of ===
and !==
in every situation (except when you opt-in to more specific handling of null
[see below]).
Examples of incorrect code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
Examples of correct code for the "always"
option:
/*eslint eqeqeq: ["error", "always"]*/
a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null
This rule optionally takes a second argument, which should be an object with the following supported properties:
-
"null"
: Customize how this rule treatsnull
literals. Possible values:-
always
(default) - Always use === or !==. -
never
- Never use === or !== withnull
. -
ignore
- Do not apply this rule tonull
.
-
smart
The "smart"
option enforces the use of ===
and !==
except for these cases:
- Comparing two literal values
- Evaluating the value of
typeof
- Comparing against
null
Examples of incorrect code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
// comparing two variables requires ===
a == b
// only one side is a literal
foo == true
bananas != 1
// comparing to undefined requires ===
value == undefined
Examples of correct code for the "smart"
option:
/*eslint eqeqeq: ["error", "smart"]*/
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null
allow-null
Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null
literal.
["error", "always", {"null": "ignore"}]
When Not To Use It
If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/
Move the invocation into the parens that contain the function. Open
(function () {
- Read upRead up
- Exclude checks
Require IIFEs to be Wrapped (wrap-iife)
You can immediately invoke function expressions, but not function declarations. A common technique to create an immediately-invoked function expression (IIFE) is to wrap a function declaration in parentheses. The opening parentheses causes the contained function to be parsed as an expression, rather than a declaration.
// function expression could be unwrapped
var x = function () { return { y: 1 };}();
// function declaration must be wrapped
function () { /* side effects */ }(); // SyntaxError
Rule Details
This rule requires all immediately-invoked function expressions to be wrapped in parentheses.
Options
This rule has two options, a string option and an object option.
String option:
-
"outside"
enforces always wrapping the call expression. The default is"outside"
. -
"inside"
enforces always wrapping the function expression. -
"any"
enforces always wrapping, but allows either style.
Object option:
-
"functionPrototypeMethods": true
additionally enforces wrapping function expressions invoked using.call
and.apply
. The default isfalse
.
outside
Examples of incorrect code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };})(); // wrapped function expression
Examples of correct code for the default "outside"
option:
/*eslint wrap-iife: ["error", "outside"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
inside
Examples of incorrect code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = function () { return { y: 1 };}(); // unwrapped
var x = (function () { return { y: 1 };}()); // wrapped call expression
Examples of correct code for the "inside"
option:
/*eslint wrap-iife: ["error", "inside"]*/
var x = (function () { return { y: 1 };})(); // wrapped function expression
any
Examples of incorrect code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = function () { return { y: 1 };}(); // unwrapped
Examples of correct code for the "any"
option:
/*eslint wrap-iife: ["error", "any"]*/
var x = (function () { return { y: 1 };}()); // wrapped call expression
var x = (function () { return { y: 1 };})(); // wrapped function expression
functionPrototypeMethods
Examples of incorrect code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = function(){ foo(); }()
var x = (function(){ foo(); }())
var x = function(){ foo(); }.call(bar)
var x = (function(){ foo(); }.call(bar))
Examples of correct code for this rule with the "inside", { "functionPrototypeMethods": true }
options:
/* eslint wrap-iife: [2, "inside", { functionPrototypeMethods: true }] */
var x = (function(){ foo(); })()
var x = (function(){ foo(); }).call(bar)
Source: http://eslint.org/docs/rules/
Similar blocks of code found in 2 locations. Consider refactoring. Open
$(".popout .btn").off().on('click', function(e){
// reload the iframe content
$widgetIframe.attr('src', helpyDomain + "/widget");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 267.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
function loadScript(src, onLoad) {
var script_tag = document.createElement('script');
script_tag.setAttribute("type", "text/javascript");
script_tag.setAttribute("src", src);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 159.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
function loadCss(href) {
var link_tag = document.createElement('link');
link_tag.setAttribute("type", "text/css");
link_tag.setAttribute("rel", "stylesheet");
link_tag.setAttribute("href", href);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 95.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
$(document).click(function(){
$(".popout .widget-panel").removeClass("active");
$(".widget-panel").addClass("hidden");
$(".popout .btn").removeClass("active");
});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 65.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
for (var i in allScripts) {
var name = allScripts[i].src;
if(name && name.indexOf(scriptName) > 0)
targetScripts.push(allScripts[i]);
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 63.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
$('.widget-iframe').on('load', function(){
this.style.height=this.contentDocument.body.scrollHeight +'px';
});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 56.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if (window.jQuery === undefined || window.jQuery.fn.jquery !== jqueryVersion) {
loadScript(jqueryPath, initjQuery);
} else {
initjQuery();
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 55.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
var $widgetIframe = $('<iframe>', {
src: helpyDomain + "/widget",
id: 'widget-frame',
frameborder: 0,
//height: 380,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 53.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
function initjQuery() {
jQuery = window.jQuery.noConflict(true);
jQuery(document).ready(main());
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 47.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76