Sign upLogin

kasperisager/vanilla-api

View on GitHub
Star

Showing 162 of 948 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($checkToken !== null
                && $tokens[$checkToken]['code'] === T_CLOSE_PARENTHESIS
                && isset($tokens[$checkToken]['parenthesis_opener']) === true
            ) {
                if ($this->_debug === true) {
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/WhiteSpace/ScopeIndentSniff.php and 1 other location - About 2 days to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/WhiteSpace/ScopeIndentSniff.php on lines 274..325

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 476.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($checkToken !== null
                && $tokens[$checkToken]['code'] === T_CLOSE_SHORT_ARRAY
            ) {
                if ($this->_debug === true) {
                    $line = $tokens[$i]['line'];
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/WhiteSpace/ScopeIndentSniff.php and 1 other location - About 2 days to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/WhiteSpace/ScopeIndentSniff.php on lines 218..270

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 476.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function getBlameContent($filename)
    {
        $cwd = getcwd();

        if (PHP_CODESNIFFER_VERBOSITY > 0) {
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Reports/Hgblame.php and 1 other location - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Reports/Gitblame.php on lines 82..128

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 367.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function getBlameContent($filename)
    {
        $cwd = getcwd();

        if (PHP_CODESNIFFER_VERBOSITY > 0) {
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Reports/Gitblame.php and 1 other location - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Reports/Hgblame.php on lines 83..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 367.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                                    for ($x = ($oldOpener + 1); $x <= $i; $x++) {
                                        $oldConditions = $tokens[$x]['conditions'];
                                        $oldLevel      = $tokens[$x]['level'];
                                        $tokens[$x]['level']--;
                                        unset($tokens[$x]['conditions'][$badToken]);
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/File.php and 1 other location - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/File.php on lines 2440..2469

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 303.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                            for ($x = $tokens[$i]['scope_condition']; $x <= $i; $x++) {
                                $oldConditions = $tokens[$x]['conditions'];
                                $oldLevel      = $tokens[$x]['level'];
                                $tokens[$x]['level']--;
                                unset($tokens[$x]['conditions'][$badToken]);
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/File.php and 1 other location - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/File.php on lines 2542..2571

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 303.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($this->requiredSpacesAfterOpen === 0 && $tokens[($openingBracket + 1)]['code'] === T_WHITESPACE) {
            $error = 'Space found after opening bracket of FOR loop';
            $fix   = $phpcsFile->addFixableError($error, $stackPtr, 'SpacingAfterOpen');
            if ($fix === true) {
                $phpcsFile->fixer->replaceToken(($openingBracket + 1), '');
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForLoopDeclarationSniff.php and 2 other locations - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/PEAR/Sniffs/Functions/FunctionCallSignatureSniff.php on lines 206..235
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php on lines 85..113

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 292.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($this->requiredSpacesAfterOpen === 0 && $tokens[($openingBracket + 1)]['code'] === T_WHITESPACE) {
            $error = 'Space found after opening bracket of FOREACH loop';
            $fix   = $phpcsFile->addFixableError($error, $stackPtr, 'SpaceAfterOpen');
            if ($fix === true) {
                $phpcsFile->fixer->replaceToken(($openingBracket + 1), '');
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php and 2 other locations - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/PEAR/Sniffs/Functions/FunctionCallSignatureSniff.php on lines 206..235
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForLoopDeclarationSniff.php on lines 94..122

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 292.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($this->requiredSpacesAfterOpen === 0 && $tokens[($openBracket + 1)]['code'] === T_WHITESPACE) {
            // Checking this: $value = my_function([*]...).
            $error = 'Space after opening parenthesis of function call prohibited';
            $fix   = $phpcsFile->addFixableError($error, $stackPtr, 'SpaceAfterOpenBracket');
            if ($fix === true) {
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/PEAR/Sniffs/Functions/FunctionCallSignatureSniff.php and 2 other locations - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php on lines 85..113
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForLoopDeclarationSniff.php on lines 94..122

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 292.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php
/**
 * Generic_Sniffs_Debug_JSHintSniff.
 *
 * PHP version 5
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/Debug/JSHintSniff.php and 1 other location - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Debug/JSLintSniff.php on lines 1..94

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 266.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php
/**
 * Squiz_Sniffs_Debug_JSLintSniff.
 *
 * PHP version 5
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Debug/JSLintSniff.php and 1 other location - About 1 day to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/Debug/JSHintSniff.php on lines 1..96

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 266.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if ($tokens[($comma + 1)]['code'] !== T_WHITESPACE) {
                    $content = $tokens[($comma + 1)]['content'];
                    $error   = 'Expected 1 space between comma and "%s"; 0 found';
                    $data    = array($content);
                    $fix     = $phpcsFile->addFixableError($error, $comma, 'NoSpaceAfterComma', $data);
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Arrays/ArrayDeclarationSniff.php and 1 other location - About 7 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Arrays/ArrayDeclarationSniff.php on lines 207..230

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 232.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($tokens[($nextArrow + 1)]['code'] !== T_WHITESPACE) {
                $content = $tokens[($nextArrow + 1)]['content'];
                $error   = 'Expected 1 space between double arrow and "%s"; 0 found';
                $data    = array($content);
                $fix     = $phpcsFile->addFixableError($error, $nextArrow, 'NoSpaceAfterDoubleArrow', $data);
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Arrays/ArrayDeclarationSniff.php and 1 other location - About 7 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Arrays/ArrayDeclarationSniff.php on lines 254..277

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 232.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        for ($after = ($stackPtr + 1); $after < $phpcsFile->numTokens; $after++) {
            // Special case for plus operators because we can't tell if they are used
            // for addition or string contact. So assume string concat to be safe.
            if ($phpcsFile->tokenizerType === 'JS' && $tokens[$after]['code'] === T_PLUS) {
                break;
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Formatting/OperatorBracketSniff.php and 1 other location - About 6 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Formatting/OperatorBracketSniff.php on lines 287..313

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 216.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        for ($before = ($stackPtr - 1); $before > 0; $before--) {
            // Special case for plus operators because we can't tell if they are used
            // for addition or string contact. So assume string concat to be safe.
            if ($phpcsFile->tokenizerType === 'JS' && $tokens[$before]['code'] === T_PLUS) {
                break;
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Formatting/OperatorBracketSniff.php and 1 other location - About 6 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/Formatting/OperatorBracketSniff.php on lines 318..344

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 216.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($tokens[($doubleArrow - 1)]['code'] !== T_WHITESPACE) {
                $error = 'Expected 1 space before "=>"; 0 found';
                $fix   = $phpcsFile->addFixableError($error, $stackPtr, 'NoSpaceBeforeArrow');
                if ($fix === true) {
                    $phpcsFile->fixer->addContentBefore($doubleArrow, ' ');
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php and 1 other location - About 5 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php on lines 207..223

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 203.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($tokens[($asToken - 1)]['code'] !== T_WHITESPACE) {
            $error = 'Expected 1 space before "as"; 0 found';
            $fix   = $phpcsFile->addFixableError($error, $stackPtr, 'NoSpaceBeforeAs');
            if ($fix === true) {
                $phpcsFile->fixer->addContentBefore($asToken, ' ');
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php and 1 other location - About 5 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php on lines 170..186

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 203.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($tokens[($doubleArrow + 1)]['code'] !== T_WHITESPACE) {
                $error = 'Expected 1 space after "=>"; 0 found';
                $fix   = $phpcsFile->addFixableError($error, $stackPtr, 'NoSpaceAfterArrow');
                if ($fix === true) {
                    $phpcsFile->fixer->addContent($doubleArrow, ' ');
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php and 1 other location - About 5 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Squiz/Sniffs/ControlStructures/ForEachLoopDeclarationSniff.php on lines 225..241

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 203.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php
/**
 * Generic_Sniffs_Commenting_TodoSniff.
 *
 * PHP version 5
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/Commenting/TodoSniff.php and 1 other location - About 5 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/Commenting/FixmeSniff.php on lines 1..90

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 203.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

<?php
/**
 * Generic_Sniffs_Commenting_FixmeSniff.
 *
 * PHP version 5
Severity: Major
Found in library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/Commenting/FixmeSniff.php and 1 other location - About 5 hrs to fix
library/vendors/squizlabs/php_codesniffer/CodeSniffer/Standards/Generic/Sniffs/Commenting/TodoSniff.php on lines 1..88

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 203.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language