Sign upLogin

onebeyond/onebeyond-studio-obelisk

View on GitHub
Star

Showing 76 of 103 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("OneBeyond.Studio.Obelisk.Authentication.Application.Entities.AuthUser", b =>
                {
                    b.Property<string>("Id")
                        .ValueGeneratedOnAdd()
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs and 1 other location - About 1 day to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs on lines 227..297

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 629.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("OneBeyond.Studio.Obelisk.Authentication.Application.Entities.AuthUser", b =>
                {
                    b.Property<string>("Id")
                        .ValueGeneratedOnAdd()
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs and 1 other location - About 1 day to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs on lines 188..258

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 629.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        CreateMap<UserBase, GetUserDto>()
            .ForMember(
                dto => dto.Id,
                opt => opt.MapFrom(user => user.Id))
            .ForMember(
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Application/Features/Users/Mappings/UserProfile.cs and 1 other location - About 4 hrs to fix
src/OneBeyond.Studio.Obelisk.Application/Features/Users/Mappings/UserProfile.cs on lines 12..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 315.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        CreateMap<UserBase, ListUsersDto>()
            .ForMember(
                dto => dto.Id,
                opt => opt.MapFrom(user => user.Id))
            .ForMember(
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Application/Features/Users/Mappings/UserProfile.cs and 1 other location - About 4 hrs to fix
src/OneBeyond.Studio.Obelisk.Application/Features/Users/Mappings/UserProfile.cs on lines 38..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 315.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        migrationBuilder.CreateTable(
            name: "AspNetUserClaims",
            columns: table => new
            {
                Id = table.Column<int>(type: "int", nullable: false)
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.cs on lines 128..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 236.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        migrationBuilder.CreateTable(
            name: "AspNetRoleClaims",
            columns: table => new
            {
                Id = table.Column<int>(type: "int", nullable: false)
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.cs on lines 149..168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 236.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("OneBeyond.Studio.Obelisk.Authentication.Application.Entities.AuthRole", b =>
                {
                    b.Property<string>("Id")
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs on lines 170..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 225.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("OneBeyond.Studio.Obelisk.Authentication.Application.Entities.AuthRole", b =>
                {
                    b.Property<string>("Id")
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs on lines 131..156

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 225.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityRoleClaim<string>", b =>
                {
                    b.Property<int>("Id")
                        .ValueGeneratedOnAdd()
                        .HasColumnType("int");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs on lines 52..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 218.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityUserClaim<string>", b =>
                {
                    b.Property<int>("Id")
                        .ValueGeneratedOnAdd()
                        .HasColumnType("int");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs on lines 27..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 218.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityUserClaim<string>", b =>
                {
                    b.Property<int>("Id")
                        .ValueGeneratedOnAdd()
                        .HasColumnType("int");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs on lines 25..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 212.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityRoleClaim<string>", b =>
                {
                    b.Property<int>("Id")
                        .ValueGeneratedOnAdd()
                        .HasColumnType("int");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs and 1 other location - About 3 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs on lines 50..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 212.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityUserLogin<string>", b =>
                {
                    b.Property<string>("LoginProvider")
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs and 1 other location - About 2 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs on lines 75..95

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 182.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityUserLogin<string>", b =>
                {
                    b.Property<string>("LoginProvider")
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs and 1 other location - About 2 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs on lines 77..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 182.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityUserToken<string>", b =>
                {
                    b.Property<string>("UserId")
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs and 1 other location - About 2 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs on lines 112..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 166.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            modelBuilder.Entity("Microsoft.AspNetCore.Identity.IdentityUserToken<string>", b =>
                {
                    b.Property<string>("UserId")
                        .HasColumnType("nvarchar(450)");
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/DomainContextModelSnapshot.cs and 1 other location - About 2 hrs to fix
src/OneBeyond.Studio.Obelisk.Infrastructure/Migrations/20220420161435_Initialize_Database.Designer.cs on lines 114..131

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 166.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using EnsureThat;
using MediatR;

namespace OneBeyond.Studio.Obelisk.Authentication.Domain.Commands;
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Authentication/OneBeyond.Studio.Obelisk.Authentication.Domain/Commands/ResetPassword.cs and 1 other location - About 2 hrs to fix
src/OneBeyond.Studio.Obelisk.Authentication/OneBeyond.Studio.Obelisk.Authentication.Domain/Commands/ChangePassword.cs on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 152.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using EnsureThat;
using MediatR;

namespace OneBeyond.Studio.Obelisk.Authentication.Domain.Commands;
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Authentication/OneBeyond.Studio.Obelisk.Authentication.Domain/Commands/ChangePassword.cs and 1 other location - About 2 hrs to fix
src/OneBeyond.Studio.Obelisk.Authentication/OneBeyond.Studio.Obelisk.Authentication.Domain/Commands/ResetPassword.cs on lines 1..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 152.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public NewUserPasswordEmailSender(
        IRORepository<UserBase, Guid> userRORepository,
        IEmailTemplateService emailTemplateLoader,
        ITemplateRenderer templateRenderer,
        IEmailSender mailSender)
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Application/Features/Users/DomainEventHandlers/NewUserPasswordEmailSender.cs and 1 other location - About 1 hr to fix
src/OneBeyond.Studio.Obelisk.Application/Features/Users/CommandHandlers/SendResetPasswordEmailHandler.cs on lines 31..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 139.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public SendResetPasswordEmailHandler(
        IRORepository<UserBase, Guid> userRORepository,
        IEmailSender mailSender,
        ITemplateRenderer templateRenderer,
        IEmailTemplateService emailTemplateLoader)
Severity: Major
Found in src/OneBeyond.Studio.Obelisk.Application/Features/Users/CommandHandlers/SendResetPasswordEmailHandler.cs and 1 other location - About 1 hr to fix
src/OneBeyond.Studio.Obelisk.Application/Features/Users/DomainEventHandlers/NewUserPasswordEmailSender.cs on lines 29..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 139.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language