($(this).attr('target') != '_blank') && !$(this).data('go') && !event.ctrlKey && !event.metaKey) {

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

  var urlNotAtRoot = window.location.pathname && (window.location.pathname != '/');

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

    require([pageModulePath], function (page) {

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/