Sign upLogin

pankod/pankod-cli

View on GitHub
Star

Showing 60 of 78 total issues

Similar blocks of code found in 11 locations. Consider refactoring.
Open

    const writeFileProps: ICommon.IWriteFile = {
        dirPath: `${options.classDir}/index.tsx`,
        getFileContent: () => getTemplate(templatePath, options),
        message: 'Added new class component.'
    };
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/nextjs2/createClassComponent.task.ts and 10 other locations - About 55 mins to fix
src/modules/element-factory/workbenches/tasks/moleculer/createInterface.task.ts on lines 41..46
src/modules/element-factory/workbenches/tasks/moleculer/createRepository.task.ts on lines 19..23
src/modules/element-factory/workbenches/tasks/nextjs/addAction.task.ts on lines 26..31
src/modules/element-factory/workbenches/tasks/nextjs/createClassComponent.task.ts on lines 31..35
src/modules/element-factory/workbenches/tasks/nextjs2/addAction.task.ts on lines 31..36
src/modules/element-factory/workbenches/tasks/nextjs2/createClassComponent.task.ts on lines 46..50
src/modules/element-factory/workbenches/tasks/nextjs2/createClassComponent.task.ts on lines 61..65
src/modules/element-factory/workbenches/tasks/nextjs2/createFuncComponent.task.ts on lines 46..50
src/modules/element-factory/workbenches/tasks/nextjs2/createFuncComponent.task.ts on lines 55..59
src/modules/element-factory/workbenches/tasks/nextjs2/createFuncComponent.task.ts on lines 61..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

        const addIndexParams: ICommon.IAddIndex = {
            dirPath: `${nextjs2.componentsDir}/index.ts`,
            getFileContent: () => getTemplate(indexTemplatePath, options),
            message: 'Component added to index.ts'
        };
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/nextjs2/createClassComponent.task.ts and 10 other locations - About 55 mins to fix
src/modules/element-factory/workbenches/tasks/moleculer/createInterface.task.ts on lines 41..46
src/modules/element-factory/workbenches/tasks/moleculer/createRepository.task.ts on lines 19..23
src/modules/element-factory/workbenches/tasks/nextjs/addAction.task.ts on lines 26..31
src/modules/element-factory/workbenches/tasks/nextjs/createClassComponent.task.ts on lines 31..35
src/modules/element-factory/workbenches/tasks/nextjs2/addAction.task.ts on lines 31..36
src/modules/element-factory/workbenches/tasks/nextjs2/createClassComponent.task.ts on lines 55..59
src/modules/element-factory/workbenches/tasks/nextjs2/createClassComponent.task.ts on lines 61..65
src/modules/element-factory/workbenches/tasks/nextjs2/createFuncComponent.task.ts on lines 46..50
src/modules/element-factory/workbenches/tasks/nextjs2/createFuncComponent.task.ts on lines 55..59
src/modules/element-factory/workbenches/tasks/nextjs2/createFuncComponent.task.ts on lines 61..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        case 'page':
            val = val.replace(/\b\w/g, foo => foo.toLowerCase());
            _path = `${startPath}/${val}`;
            break;
Severity: Minor
Found in src/modules/element-factory/workbenches/operations/isAlreadyExist.operation.ts and 1 other location - About 50 mins to fix
src/modules/element-factory/workbenches/operations/isAlreadyExist.operation.ts on lines 19..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        case 'service':
            val = val.replace(/\b\w/g, foo => foo.toLowerCase());
            _path = `${startPath}/${val}.service.ts`;
            break;
Severity: Minor
Found in src/modules/element-factory/workbenches/operations/isAlreadyExist.operation.ts and 1 other location - About 50 mins to fix
src/modules/element-factory/workbenches/operations/isAlreadyExist.operation.ts on lines 15..18

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const serviceHelperTestParams = {
        ...options,
        dirPath: `${moleculer.serviceHelperTestDir}/${options.upperFileName}Helper.spec.ts`,
        successMessage: 'Added new Micro Service Helper test.',
        templatePath: createServiceHelperParams.testTemplatePath,
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/moleculer/createServiceHelper.task.ts and 3 other locations - About 50 mins to fix
src/modules/element-factory/workbenches/tasks/moleculer/createRepository.task.ts on lines 31..36
src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts on lines 35..40
src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts on lines 42..47

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export const isPrivate: inquirer.ConfirmQuestion<ICommon.IAnswers> = {
    default: true,
    message: 'Is service open to outside?',
    name: 'isPrivate',
    type: 'confirm'
Severity: Major
Found in src/modules/henchman/suitcase/questions/moleculer/service.question.ts and 3 other locations - About 50 mins to fix
src/modules/henchman/suitcase/questions/moleculer/service.question.ts on lines 28..33
src/modules/henchman/suitcase/questions/nextjs/common.question.ts on lines 19..24
src/modules/henchman/suitcase/questions/svelte/component.question.ts on lines 21..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export const hasStyle: inquirer.ConfirmQuestion<ICommon.IAnswers> = {
    default: true,
    message: 'Do you want to add style file?',
    name: 'hasStyle',
    type: 'confirm'
Severity: Major
Found in src/modules/henchman/suitcase/questions/svelte/component.question.ts and 3 other locations - About 50 mins to fix
src/modules/henchman/suitcase/questions/moleculer/service.question.ts on lines 21..26
src/modules/henchman/suitcase/questions/moleculer/service.question.ts on lines 28..33
src/modules/henchman/suitcase/questions/nextjs/common.question.ts on lines 19..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const integrationTestParams = {
        ...options,
        dirPath: `${moleculer.integrationTestDir}/${options.lowerFileName}.spec.ts`,
        successMessage: 'Added new Integration test.',
        templatePath: createServiceParams.integrationTemplatePath,
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts and 3 other locations - About 50 mins to fix
src/modules/element-factory/workbenches/tasks/moleculer/createRepository.task.ts on lines 31..36
src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts on lines 35..40
src/modules/element-factory/workbenches/tasks/moleculer/createServiceHelper.task.ts on lines 22..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const repositoryTestParams = {
        ...options,
        dirPath: `${moleculer.repositoriesTestDir}/${options.upperFileName}.spec.ts`,
        successMessage: 'Added new Repository test.',
        templatePath: createRepositoryParams.testTemplatePath,
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/moleculer/createRepository.task.ts and 3 other locations - About 50 mins to fix
src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts on lines 35..40
src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts on lines 42..47
src/modules/element-factory/workbenches/tasks/moleculer/createServiceHelper.task.ts on lines 22..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const createTestParams: ISvelteHelper.ICreateStyle = {
    compDirPath: paths.svelte.componentsDir,
    templatePath: paths.svelte.templates.componentTestTemplate
};
Severity: Minor
Found in src/modules/element-factory/workbenches/params/svelte.params.ts and 1 other location - About 50 mins to fix
src/modules/element-factory/workbenches/params/svelte.params.ts on lines 11..14

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const createStyleParams: ISvelteHelper.ICreateStyle = {
    compDirPath: paths.svelte.componentsDir,
    templatePath: paths.svelte.templates.stylePageTemplate
};
Severity: Minor
Found in src/modules/element-factory/workbenches/params/svelte.params.ts and 1 other location - About 50 mins to fix
src/modules/element-factory/workbenches/params/svelte.params.ts on lines 16..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const serviceTestParams = {
        ...options,
        dirPath: `${moleculer.servicesTestDir}/${options.lowerFileName}.spec.ts`,
        successMessage: 'Added new Microservice test.',
        templatePath: createServiceParams.testTemplatePath,
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts and 3 other locations - About 50 mins to fix
src/modules/element-factory/workbenches/tasks/moleculer/createRepository.task.ts on lines 31..36
src/modules/element-factory/workbenches/tasks/moleculer/createService.task.ts on lines 42..47
src/modules/element-factory/workbenches/tasks/moleculer/createServiceHelper.task.ts on lines 22..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export const connectStore: inquirer.ConfirmQuestion<ICommon.IAnswers> = {
    default: false,
    message: 'Do you want to connect store ?',
    name: 'isConnectStore',
    type: 'confirm'
Severity: Major
Found in src/modules/henchman/suitcase/questions/nextjs/common.question.ts and 3 other locations - About 50 mins to fix
src/modules/henchman/suitcase/questions/moleculer/service.question.ts on lines 21..26
src/modules/henchman/suitcase/questions/moleculer/service.question.ts on lines 28..33
src/modules/henchman/suitcase/questions/svelte/component.question.ts on lines 21..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

export const hasDatabase: inquirer.ConfirmQuestion<ICommon.IAnswers> = {
    default: true,
    message: 'Are you going to have a database connection?',
    name: 'hasDatabase',
    type: 'confirm'
Severity: Major
Found in src/modules/henchman/suitcase/questions/moleculer/service.question.ts and 3 other locations - About 50 mins to fix
src/modules/henchman/suitcase/questions/moleculer/service.question.ts on lines 21..26
src/modules/henchman/suitcase/questions/nextjs/common.question.ts on lines 19..24
src/modules/henchman/suitcase/questions/svelte/component.question.ts on lines 21..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const writeFileProps: ICommon.IWriteFile = {
        dirPath: `${componentDir}/index.svelte`,
        getFileContent: () => getTemplate(templatePath, options),
        message: 'Add new component.'
    };
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/svelte/createComponent.task.ts and 3 other locations - About 45 mins to fix
src/modules/element-factory/workbenches/tasks/nextjs/createClassComponent.task.ts on lines 37..41
src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts on lines 32..36
src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts on lines 38..42

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const addIndexParams: ICommon.IAddIndex = {
        dirPath: `${componentsDir}/index.ts`,
        getFileContent: () => getTemplate(indexTemplatePath, templateProps),
        message: 'Component added to index.ts.'
    };
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts and 3 other locations - About 45 mins to fix
src/modules/element-factory/workbenches/tasks/nextjs/createClassComponent.task.ts on lines 37..41
src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts on lines 38..42
src/modules/element-factory/workbenches/tasks/svelte/createComponent.task.ts on lines 15..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const writeFileProps: ICommon.IWriteFile = {
        dirPath: `${funcDir}/index.tsx`,
        getFileContent: () => getTemplate(templatePath, templateProps),
        message: 'Add new functional component.'
    };
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts and 3 other locations - About 45 mins to fix
src/modules/element-factory/workbenches/tasks/nextjs/createClassComponent.task.ts on lines 37..41
src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts on lines 32..36
src/modules/element-factory/workbenches/tasks/svelte/createComponent.task.ts on lines 15..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    const writeFileProps: ICommon.IWriteFile = {
        dirPath: `${classDir}/index.tsx`,
        getFileContent: () => getTemplate(templatePath, options),
        message: 'Added new class component'
    };
Severity: Major
Found in src/modules/element-factory/workbenches/tasks/nextjs/createClassComponent.task.ts and 3 other locations - About 45 mins to fix
src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts on lines 32..36
src/modules/element-factory/workbenches/tasks/nextjs/createFuncComponent.task.ts on lines 38..42
src/modules/element-factory/workbenches/tasks/svelte/createComponent.task.ts on lines 15..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (formattedRegex && params.filetoUpdate.match(formattedRegex)) {
            return {
                ...params,
                regexKey: formattedRegex,
                getFileContent: () =>
Severity: Minor
Found in src/modules/element-factory/workbenches/tasks/nextjs/createInterface.task.ts and 1 other location - About 40 mins to fix
src/modules/element-factory/workbenches/tasks/nextjs2/createInterface.task.ts on lines 59..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (formattedRegex && params.filetoUpdate.match(formattedRegex)) {
            return {
                ...params,
                regexKey: formattedRegex,
                getFileContent: () => getTemplate(formattedTarget, options)
Severity: Minor
Found in src/modules/element-factory/workbenches/tasks/nextjs2/createInterface.task.ts and 1 other location - About 40 mins to fix
src/modules/element-factory/workbenches/tasks/nextjs/createInterface.task.ts on lines 80..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language