Sign upLogin

phodal/chapi

View on GitHub
Star

Showing 289 of 364 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    internal fun shouldIdentifyForwardDeclaration() {
        val code = """
struct context;
Severity: Major
Found in chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt on lines 155..170

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    internal fun shouldIdentifyNestedStruct() {
        val code = """
struct Info{
    char name[30];
Severity: Major
Found in chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt on lines 217..233

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private fun buildOptionalParameter(paramCtx: TypeScriptParser.OptionalParameterContext): CodeProperty {
        var paramType = ""
        if (paramCtx.typeAnnotation() != null) {
            paramType = buildTypeAnnotation(paramCtx.typeAnnotation())!!
        }
Severity: Major
Found in chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptAstListener.kt and 1 other location - About 1 hr to fix
chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptAstListener.kt on lines 122..132

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 146.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private fun buildRequireParameter(paramCtx: TypeScriptParser.RequiredParameterContext): CodeProperty {
        var paramType = ""
        if (paramCtx.typeAnnotation() != null) {
            paramType = buildTypeAnnotation(paramCtx.typeAnnotation())!!
        }
Severity: Major
Found in chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptAstListener.kt and 1 other location - About 1 hr to fix
chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptAstListener.kt on lines 110..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 146.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

     fun chai_define() {
        val content = this::class.java.getResource("/dts/index.d.ts")!!.readText()
        val codeFile = TypeScriptAnalyser().analysis(content, "/dts/index.d.ts")

        assertEquals(codeFile.PackageName, "@.dts.index.d")
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptAnalyserTest.kt and 1 other location - About 1 hr to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptAnalyserTest.kt on lines 57..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 145.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    internal fun shouldIdentifyPackage() {
        val content = this::class.java.getResource("/grammar/AbstractClass.ts")!!.readText()
        val codeFile = TypeScriptAnalyser().analysis(content, "/grammar/AbstractClass.ts")

        assertEquals(codeFile.PackageName, "@.grammar.AbstractClass")
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptAnalyserTest.kt and 1 other location - About 1 hr to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptAnalyserTest.kt on lines 66..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 145.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (ctx.STATIC() != null) {
            val sourceSplit = codeImport.Source.split(".")
            codeImport.UsageName = listOf(sourceSplit.last())

            val split = sourceSplit.dropLast(1)
Severity: Major
Found in chapi-ast-java/src/main/kotlin/chapi/ast/javaast/JavaBasicIdentListener.kt and 1 other location - About 1 hr to fix
chapi-ast-java/src/main/kotlin/chapi/ast/javaast/JavaFullIdentListener.kt on lines 54..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (ctx.STATIC() != null) {
            val sourceSplit = codeImport.Source.split(".")
            codeImport.UsageName = listOf(sourceSplit.last())

            val split = sourceSplit.dropLast(1)
Severity: Major
Found in chapi-ast-java/src/main/kotlin/chapi/ast/javaast/JavaFullIdentListener.kt and 1 other location - About 1 hr to fix
chapi-ast-java/src/main/kotlin/chapi/ast/javaast/JavaBasicIdentListener.kt on lines 20..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            codeContainer.DataStructures[0].Functions[2].Annotations[0].run {
                assertEquals(Name, "Method")
                assertEquals(KeyValues[0].Key, "scope")
                assertEquals(KeyValues[0].Value, "Method.SECOND")
            }
Severity: Major
Found in chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 313..317

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            codeContainer.DataStructures[0].Functions[1].Annotations[0].run {
                assertEquals(Name, "Method")
                assertEquals(KeyValues[0].Key, "scope")
                assertEquals(KeyValues[0].Value, "Method.FIRST")
            }
Severity: Major
Found in chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 318..322

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun symbolKeywordInObjectLiteral() {
        val code = """
const getMarkLineOpt = (coordX: number, coordY: number) => {
  return {
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 2 other locations - About 1 hr to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1157..1170
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1184..1197

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 135.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun typeEnumList() {
        val code = """
interface CytoscapeOptions {
  elements?:
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 2 other locations - About 1 hr to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1048..1061
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1157..1170

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 135.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun typeAnnotationForObjectLiteralGenerateMethod() {
        val code = """
const store: IOptions<State, string, string, string> = {
  mutations: {
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 2 other locations - About 1 hr to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1048..1061
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1184..1197

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 135.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    fun shouldHandleMacroInArray() {
        val code = """
            static char log_filename[
            #ifdef JEMALLOC_PROF
Severity: Major
Found in chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt on lines 596..608

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 133.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Test
    fun shouldHandleMacroIArrayDefine() {
        val code = """
            static char log_filename[
            #ifdef JEMALLOC_PROF
Severity: Major
Found in chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-c/src/test/kotlin/chapi/ast/cast/CFullIdentListenerTest.kt on lines 582..594

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 133.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        val code = """
import { updateSystemInfo } from '@/api/addition/systemInfo';
import { BadSmellOption, useBadSmellOption } from "@/api/module/badSmellThresholds";
import useSystemList from '@/store/global-cache-state/useSystemList';
import { storage } from '@/store/storage/sessionStorage';
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-go/src/test/kotlin/chapi/ast/goast/GoMethodCallTest.kt on lines 9..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    init {
        includes.forEach {
            val value = it
                .removeSurrounding("\"", "\"")
                .removeSurrounding("<", ">")
Severity: Major
Found in chapi-ast-cpp/src/main/kotlin/chapi/ast/cppast/CPPBasicIdentListener.kt and 1 other location - About 1 hr to fix
chapi-ast-c/src/main/kotlin/chapi/ast/cast/CFullIdentListener.kt on lines 13..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        val code = """package main

import (
    "github.com/gin-gonic/gin"
    "net/http"
Severity: Major
Found in chapi-ast-go/src/test/kotlin/chapi/ast/goast/GoMethodCallTest.kt and 1 other location - About 1 hr to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 310..321

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    init {
        includes.forEach {
            val value = it
                .removeSurrounding("\"", "\"")
                .removeSurrounding("<", ">")
Severity: Major
Found in chapi-ast-c/src/main/kotlin/chapi/ast/cast/CFullIdentListener.kt and 1 other location - About 1 hr to fix
chapi-ast-cpp/src/main/kotlin/chapi/ast/cppast/CPPBasicIdentListener.kt on lines 15..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            codeContainer.DataStructures[0].Fields[1].run {
                assertEquals(TypeType, "kotlin.IntValue")
                assertEquals(TypeValue, "0")
                assertEquals(TypeKey, "age")
                assertEquals(Modifiers[0], "val")
Severity: Major
Found in chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt and 1 other location - About 1 hr to fix
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 154..159

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language