Sign upLogin

polkadot-js/api

View on GitHub
Star

Showing 2,442 of 2,627 total issues

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      removeAnnouncement: AugmentedSubmittable<(real: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/polkadot/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4913..4913
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      rejectAnnouncement: AugmentedSubmittable<(delegate: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/kusama/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4913..4913
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      rejectAnnouncement: AugmentedSubmittable<(delegate: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/polkadot/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4913..4913
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      rejectAnnouncement: AugmentedSubmittable<(delegate: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/substrate/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      announce: AugmentedSubmittable<(real: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/substrate/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4913..4913
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      setCode: AugmentedSubmittable<(dest: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, codeHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/substrate/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4913..4913
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      removeAnnouncement: AugmentedSubmittable<(real: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/kusama/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4913..4913
packages/api-augment/src/substrate/tx.ts on lines 4926..4926

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

      removeAnnouncement: AugmentedSubmittable<(real: MultiAddress | { Id: any } | { Index: any } | { Raw: any } | { Address32: any } | { Address20: any } | string | Uint8Array, callHash: H256 | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [MultiAddress, H256]>;
Severity: Major
Found in packages/api-augment/src/substrate/tx.ts and 9 other locations - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2485..2485
packages/api-augment/src/kusama/tx.ts on lines 2564..2564
packages/api-augment/src/kusama/tx.ts on lines 2577..2577
packages/api-augment/src/polkadot/tx.ts on lines 994..994
packages/api-augment/src/polkadot/tx.ts on lines 1014..1014
packages/api-augment/src/polkadot/tx.ts on lines 1018..1018
packages/api-augment/src/substrate/tx.ts on lines 1608..1608
packages/api-augment/src/substrate/tx.ts on lines 4834..4834
packages/api-augment/src/substrate/tx.ts on lines 4913..4913

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      estimateGas: AugmentedRpc<(request: EthCallRequest | { from?: any; to?: any; gasPrice?: any; gas?: any; value?: any; data?: any; nonce?: any } | string | Uint8Array, number?: BlockNumber | AnyNumber | Uint8Array) => Observable<U256>>;
Severity: Major
Found in packages/rpc-augment/src/augment/jsonrpc.ts and 1 other location - About 3 hrs to fix
packages/rpc-augment/src/augment/jsonrpc.ts on lines 198..198

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      call: AugmentedRpc<(request: EthCallRequest | { from?: any; to?: any; gasPrice?: any; gas?: any; value?: any; data?: any; nonce?: any } | string | Uint8Array, number?: BlockNumber | AnyNumber | Uint8Array) => Observable<Bytes>>;
Severity: Major
Found in packages/rpc-augment/src/augment/jsonrpc.ts and 1 other location - About 3 hrs to fix
packages/rpc-augment/src/augment/jsonrpc.ts on lines 210..210

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  interface KitchensinkRuntimeOriginCaller extends Enum {
    readonly isSystem: boolean;
    readonly asSystem: FrameSupportDispatchRawOrigin;
    readonly isVoid: boolean;
    readonly isCouncil: boolean;
Severity: Major
Found in packages/types-augment/src/lookup/types-substrate.ts and 2 other locations - About 3 hrs to fix
packages/types-augment/src/lookup/types-kusama.ts on lines 30..41
packages/types-augment/src/lookup/types-polkadot.ts on lines 436..447

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  interface PalletTxPauseCall extends Enum {
    readonly isPause: boolean;
    readonly asPause: {
      readonly fullName: ITuple<[Bytes, Bytes]>;
    } & Struct;
Severity: Major
Found in packages/types-augment/src/lookup/types-substrate.ts and 1 other location - About 3 hrs to fix
packages/types-augment/src/lookup/types-substrate.ts on lines 6393..6403

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  interface PalletTxPauseEvent extends Enum {
    readonly isCallPaused: boolean;
    readonly asCallPaused: {
      readonly fullName: ITuple<[Bytes, Bytes]>;
    } & Struct;
Severity: Major
Found in packages/types-augment/src/lookup/types-substrate.ts and 1 other location - About 3 hrs to fix
packages/types-augment/src/lookup/types-substrate.ts on lines 5679..5689

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  interface StagingKusamaRuntimeOriginCaller extends Enum {
    readonly isSystem: boolean;
    readonly asSystem: FrameSupportDispatchRawOrigin;
    readonly isVoid: boolean;
    readonly isOrigins: boolean;
Severity: Major
Found in packages/types-augment/src/lookup/types-kusama.ts and 2 other locations - About 3 hrs to fix
packages/types-augment/src/lookup/types-polkadot.ts on lines 436..447
packages/types-augment/src/lookup/types-substrate.ts on lines 2532..2543

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  interface PolkadotRuntimeOriginCaller extends Enum {
    readonly isSystem: boolean;
    readonly asSystem: FrameSupportDispatchRawOrigin;
    readonly isVoid: boolean;
    readonly isOrigins: boolean;
Severity: Major
Found in packages/types-augment/src/lookup/types-polkadot.ts and 2 other locations - About 3 hrs to fix
packages/types-augment/src/lookup/types-kusama.ts on lines 30..41
packages/types-augment/src/lookup/types-substrate.ts on lines 2532..2543

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    parasDisputes: {
      /**
       * A dispute has concluded for or against a candidate.
       * `\[para id, candidate hash, dispute result\]`
       **/
Severity: Major
Found in packages/api-augment/src/polkadot/events.ts and 1 other location - About 3 hrs to fix
packages/api-augment/src/kusama/events.ts on lines 918..939

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    parasDisputes: {
      /**
       * A dispute has concluded for or against a candidate.
       * `\[para id, candidate hash, dispute result\]`
       **/
Severity: Major
Found in packages/api-augment/src/kusama/events.ts and 1 other location - About 3 hrs to fix
packages/api-augment/src/polkadot/events.ts on lines 733..754

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      execute: AugmentedSubmittable<(message: XcmVersionedXcm | { V2: any } | { V3: any } | { V4: any } | string | Uint8Array, maxWeight: SpWeightsWeightV2Weight | { refTime?: any; proofSize?: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [XcmVersionedXcm, SpWeightsWeightV2Weight]>;
Severity: Major
Found in packages/api-augment/src/kusama/tx.ts and 1 other location - About 3 hrs to fix
packages/api-augment/src/polkadot/tx.ts on lines 1544..1544

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    paraInherent: {
      /**
       * See [`Pallet::enter`].
       **/
      enter: AugmentedSubmittable<(data: PolkadotPrimitivesV6InherentData | { bitfields?: any; backedCandidates?: any; disputes?: any; parentHeader?: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [PolkadotPrimitivesV6InherentData]>;
Severity: Major
Found in packages/api-augment/src/polkadot/tx.ts and 1 other location - About 3 hrs to fix
packages/api-augment/src/kusama/tx.ts on lines 2309..2318

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    paraInherent: {
      /**
       * Enter the paras inherent. This will process bitfields and backed candidates.
       **/
      enter: AugmentedSubmittable<(data: PolkadotPrimitivesV7InherentData | { bitfields?: any; backedCandidates?: any; disputes?: any; parentHeader?: any } | string | Uint8Array) => SubmittableExtrinsic<ApiType>, [PolkadotPrimitivesV7InherentData]>;
Severity: Major
Found in packages/api-augment/src/kusama/tx.ts and 1 other location - About 3 hrs to fix
packages/api-augment/src/polkadot/tx.ts on lines 882..891

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language