Sign upLogin

polkadot-js/api

View on GitHub
Star

Showing 2,442 of 2,627 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    AssetDetails: {
      owner: 'AccountId',
      issuer: 'AccountId',
      admin: 'AccountId',
      freezer: 'AccountId',
Severity: Major
Found in packages/types/src/interfaces/assets/definitions.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/eth/definitions.ts on lines 65..78

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  interface XcmV3MultiassetFungibility extends Enum {
    readonly isFungible: boolean;
    readonly asFungible: Compact<u128>;
    readonly isNonFungible: boolean;
    readonly asNonFungible: XcmV3MultiassetAssetInstance;
Severity: Major
Found in packages/types-augment/src/lookup/types-polkadot.ts and 2 other locations - About 1 hr to fix
packages/types-augment/src/lookup/types-polkadot.ts on lines 1498..1504
packages/types-augment/src/lookup/types-polkadot.ts on lines 2165..2171

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    readonly asScheduleAfter: {
      readonly after: u32;
      readonly maybePeriodic: Option<ITuple<[u32, u32]>>;
      readonly priority: u8;
      readonly call: Call;
Severity: Major
Found in packages/types-augment/src/lookup/types-substrate.ts and 1 other location - About 1 hr to fix
packages/types-augment/src/lookup/types-substrate.ts on lines 3739..3744

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  EIP1559Transaction: {
    chainId: 'u64',
    nonce: 'U256',
    maxPriorityFeePerGas: 'U256',
    maxFeePerGas: 'U256',
Severity: Major
Found in packages/types/src/interfaces/eth/definitions.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/assets/definitions.ts on lines 33..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  interface XcmV2MultiassetFungibility extends Enum {
    readonly isFungible: boolean;
    readonly asFungible: Compact<u128>;
    readonly isNonFungible: boolean;
    readonly asNonFungible: XcmV2MultiassetAssetInstance;
Severity: Major
Found in packages/types-augment/src/lookup/types-polkadot.ts and 2 other locations - About 1 hr to fix
packages/types-augment/src/lookup/types-polkadot.ts on lines 1813..1819
packages/types-augment/src/lookup/types-polkadot.ts on lines 2165..2171

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

export interface Forcing extends Enum {
  readonly isNotForcing: boolean;
  readonly isForceNew: boolean;
  readonly isForceNone: boolean;
  readonly isForceAlways: boolean;
Severity: Major
Found in packages/types/src/interfaces/staking/types.ts and 5 other locations - About 1 hr to fix
packages/types/src/interfaces/eth/types.ts on lines 285..291
packages/types/src/interfaces/mixnet/types.ts on lines 24..30
packages/types/src/interfaces/xcm/types.ts on lines 1300..1306
packages/types/src/interfaces/xcm/types.ts on lines 1312..1318
packages/types/src/interfaces/xcm/types.ts on lines 1960..1966

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

export interface XcmOriginKind extends Enum {
  readonly isNative: boolean;
  readonly isSovereignAccount: boolean;
  readonly isSuperuser: boolean;
  readonly isXcm: boolean;
Severity: Major
Found in packages/types/src/interfaces/xcm/types.ts and 5 other locations - About 1 hr to fix
packages/types/src/interfaces/eth/types.ts on lines 285..291
packages/types/src/interfaces/mixnet/types.ts on lines 24..30
packages/types/src/interfaces/staking/types.ts on lines 169..175
packages/types/src/interfaces/xcm/types.ts on lines 1300..1306
packages/types/src/interfaces/xcm/types.ts on lines 1312..1318

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

export interface OriginKindV2 extends Enum {
  readonly isNative: boolean;
  readonly isSovereignAccount: boolean;
  readonly isSuperuser: boolean;
  readonly isXcm: boolean;
Severity: Major
Found in packages/types/src/interfaces/xcm/types.ts and 5 other locations - About 1 hr to fix
packages/types/src/interfaces/eth/types.ts on lines 285..291
packages/types/src/interfaces/mixnet/types.ts on lines 24..30
packages/types/src/interfaces/staking/types.ts on lines 169..175
packages/types/src/interfaces/xcm/types.ts on lines 1300..1306
packages/types/src/interfaces/xcm/types.ts on lines 1960..1966

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

export interface EthSubKind extends Enum {
  readonly isNewHeads: boolean;
  readonly isLogs: boolean;
  readonly isNewPendingTransactions: boolean;
  readonly isSyncing: boolean;
Severity: Major
Found in packages/types/src/interfaces/eth/types.ts and 5 other locations - About 1 hr to fix
packages/types/src/interfaces/mixnet/types.ts on lines 24..30
packages/types/src/interfaces/staking/types.ts on lines 169..175
packages/types/src/interfaces/xcm/types.ts on lines 1300..1306
packages/types/src/interfaces/xcm/types.ts on lines 1312..1318
packages/types/src/interfaces/xcm/types.ts on lines 1960..1966

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

export interface OriginKindV0 extends Enum {
  readonly isNative: boolean;
  readonly isSovereignAccount: boolean;
  readonly isSuperuser: boolean;
  readonly isXcm: boolean;
Severity: Major
Found in packages/types/src/interfaces/xcm/types.ts and 5 other locations - About 1 hr to fix
packages/types/src/interfaces/eth/types.ts on lines 285..291
packages/types/src/interfaces/mixnet/types.ts on lines 24..30
packages/types/src/interfaces/staking/types.ts on lines 169..175
packages/types/src/interfaces/xcm/types.ts on lines 1312..1318
packages/types/src/interfaces/xcm/types.ts on lines 1960..1966

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

export interface SessionPhase extends Enum {
  readonly isCoverToCurrent: boolean;
  readonly isRequestsToCurrent: boolean;
  readonly isCoverToPrev: boolean;
  readonly isDisconnectFromPrev: boolean;
Severity: Major
Found in packages/types/src/interfaces/mixnet/types.ts and 5 other locations - About 1 hr to fix
packages/types/src/interfaces/eth/types.ts on lines 285..291
packages/types/src/interfaces/staking/types.ts on lines 169..175
packages/types/src/interfaces/xcm/types.ts on lines 1300..1306
packages/types/src/interfaces/xcm/types.ts on lines 1312..1318
packages/types/src/interfaces/xcm/types.ts on lines 1960..1966

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export interface Si1Variant extends Struct {
  readonly name: Text;
  readonly fields: Vec<Si1Field>;
  readonly index: u8;
  readonly docs: Vec<Text>;
Severity: Major
Found in packages/types/src/interfaces/scaleInfo/types.ts and 2 other locations - About 1 hr to fix
packages/types/src/interfaces/metadata/types.ts on lines 412..417
packages/types/src/interfaces/scaleInfo/types.ts on lines 138..143

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export interface Si1Type extends Struct {
  readonly path: Si1Path;
  readonly params: Vec<Si1TypeParameter>;
  readonly def: Si1TypeDef;
  readonly docs: Vec<Text>;
Severity: Major
Found in packages/types/src/interfaces/scaleInfo/types.ts and 2 other locations - About 1 hr to fix
packages/types/src/interfaces/metadata/types.ts on lines 412..417
packages/types/src/interfaces/scaleInfo/types.ts on lines 213..218

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface ContractConstructorSpecV0 extends Struct {
  readonly name: Text;
  readonly selector: ContractSelector;
  readonly args: Vec<ContractMessageParamSpecV0>;
  readonly docs: Vec<Text>;
Severity: Major
Found in packages/types/src/interfaces/contractsAbi/types.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/contractsAbi/types.ts on lines 29..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export interface RuntimeApiMethodMetadataV15 extends Struct {
  readonly name: Text;
  readonly inputs: Vec<RuntimeApiMethodParamMetadataV15>;
  readonly output: SiLookupTypeId;
  readonly docs: Vec<Text>;
Severity: Major
Found in packages/types/src/interfaces/metadata/types.ts and 2 other locations - About 1 hr to fix
packages/types/src/interfaces/scaleInfo/types.ts on lines 138..143
packages/types/src/interfaces/scaleInfo/types.ts on lines 213..218

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface StakingLedgerTo223 extends Struct {
  readonly stash: AccountId;
  readonly total: Compact<Balance>;
  readonly active: Compact<Balance>;
  readonly unlocking: Vec<UnlockChunk>;
Severity: Major
Found in packages/types/src/interfaces/staking/types.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/system/types.ts on lines 469..474

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  AuraUnincludedSegmentApi: [
    {
      methods: {
        can_build_upon: {
          description: 'Whether it is legal to extend the chain',
Severity: Major
Found in packages/types/src/interfaces/cumulus/runtime.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/statement/runtime.ts on lines 7..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface ContractConstructorSpecV2 extends Struct {
  readonly label: Text;
  readonly selector: ContractSelector;
  readonly args: Vec<ContractMessageParamSpecV2>;
  readonly docs: Vec<Text>;
Severity: Major
Found in packages/types/src/interfaces/contractsAbi/types.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/contractsAbi/types.ts on lines 13..18

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (validatorId === stakerId) {
          if ((exposure as SpStakingExposure).own) {
            staked = (exposure as SpStakingExposure).own.unwrap();
          } else {
            const expAccount = exposure.others.find(({ who }) => who.eq(validatorId));
Severity: Major
Found in packages/api-derive/src/staking/stakerRewards.ts and 1 other location - About 1 hr to fix
packages/api-derive/src/staking/stakerRewards.ts on lines 58..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface WeightPerClass extends Struct {
  readonly baseExtrinsic: Weight;
  readonly maxExtrinsic: Option<Weight>;
  readonly maxTotal: Option<Weight>;
  readonly reserved: Option<Weight>;
Severity: Major
Found in packages/types/src/interfaces/system/types.ts and 1 other location - About 1 hr to fix
packages/types/src/interfaces/staking/types.ts on lines 342..347

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language