Sign upLogin

prasadtalasila/BITS-Darshini

View on GitHub
Star

Showing 77 of 651 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          for(var id=1; id<=LoadView.globalMy.length;id+=1){    //index of array starts from 0
          var td, tr;
          var tdata = $("#expListMy tbody")
          tr = $("<tr>");
          td = $("<td>").text(id);
Severity: Major
Found in src/main/webapp/WEB-INF/js/views/load-view.js and 1 other location - About 7 hrs to fix
src/main/webapp/WEB-INF/js/views/load-view.js on lines 52..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 190.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      for(var id=1; id<=LoadView.globalShared.length;id+=1){    //index of array starts from 0
          var td, tr;
          var tdata = $("#expListShared tbody")
          tr = $("<tr>");
          td = $("<td>").text(id);
Severity: Major
Found in src/main/webapp/WEB-INF/js/views/load-view.js and 1 other location - About 7 hrs to fix
src/main/webapp/WEB-INF/js/views/load-view.js on lines 39..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 190.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    $(function() {
      $("#slider").slider({
        range: "max",
        min: 20,
        max: 1000,
Severity: Major
Found in src/main/webapp/WEB-INF/js/views/config-playground-view.js and 3 other locations - About 4 hrs to fix
src/main/webapp/WEB-INF/js/views/analysis-view.js on lines 144..156
src/main/webapp/WEB-INF/js/views/experiment-view.js on lines 94..106
src/main/webapp/WEB-INF/js/views/load-view.js on lines 183..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 121.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

          $(function() {
            $("#slider").slider({
              range: "max",
              min: 20,
              max: 1000,
Severity: Major
Found in src/main/webapp/WEB-INF/js/views/analysis-view.js and 3 other locations - About 4 hrs to fix
src/main/webapp/WEB-INF/js/views/config-playground-view.js on lines 206..218
src/main/webapp/WEB-INF/js/views/experiment-view.js on lines 94..106
src/main/webapp/WEB-INF/js/views/load-view.js on lines 183..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 121.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    $(function() {
      $("#slider").slider({
        range: "max",
        min: 20,
        max: 1000,
Severity: Major
Found in src/main/webapp/WEB-INF/js/views/load-view.js and 3 other locations - About 4 hrs to fix
src/main/webapp/WEB-INF/js/views/analysis-view.js on lines 144..156
src/main/webapp/WEB-INF/js/views/config-playground-view.js on lines 206..218
src/main/webapp/WEB-INF/js/views/experiment-view.js on lines 94..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 121.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

            $(function() {
                $("#slider").slider({
                    range: "max",
                    min: 20,
                    max: 1000,
Severity: Major
Found in src/main/webapp/WEB-INF/js/views/experiment-view.js and 3 other locations - About 4 hrs to fix
src/main/webapp/WEB-INF/js/views/analysis-view.js on lines 144..156
src/main/webapp/WEB-INF/js/views/config-playground-view.js on lines 206..218
src/main/webapp/WEB-INF/js/views/load-view.js on lines 183..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 121.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  @Subscribe
  public void analyze(PacketWrapper packetWrapper) {
    if (Protocol.get("ETHERNET").equalsIgnoreCase(packetWrapper.getPacketType())) {
      setEthernetHeader(packetWrapper);
      String nextPacketType = setNextProtocolType();
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/analyzer/link/EthernetAnalyzer.java and 1 other location - About 2 hrs to fix
src/main/java/in/ac/bits/protocolanalyzer/analyzer/transport/IcmpAnalyzer.java on lines 80..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  @Subscribe
  public void analyze(PacketWrapper packetWrapper) {
    if (Protocol.get("ICMP").equalsIgnoreCase(packetWrapper.getPacketType())) {
      setIcmpHeader(packetWrapper);
      String nextPacketType = setNextProtocolType();
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/analyzer/transport/IcmpAnalyzer.java and 1 other location - About 2 hrs to fix
src/main/java/in/ac/bits/protocolanalyzer/analyzer/link/EthernetAnalyzer.java on lines 77..94

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public String analyze() {
        // Initializing session and protocol
        //log.info("Starting to analyze ..........");
        init(pcapPath);
        graphParser = context.getBean(ProtocolGraphParser.class);
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/mvc/controller/Experiment.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/mvc/controller/SessionController.java on lines 48..67

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 93.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @RequestMapping(value = "/analysis", method = RequestMethod.GET)
    public @ResponseBody String analyze(
            @RequestParam("graph") String protocolGraphStr,
            @RequestParam("pcapPath") String pcapPath) {
        // Initializing session and protocol
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/mvc/controller/SessionController.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/mvc/controller/Experiment.java on lines 52..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 93.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static short parseBytesshort(byte[] bytes)
            throws ArrayIndexOutOfBoundsException {
        if (bytes.length > 2) {
            throw new ArrayIndexOutOfBoundsException(
                    "Byte array length exceeds 4!");
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/utils/ByteOperator.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/utils/ByteOperator.java on lines 20..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        } else if (mode.equalsIgnoreCase("hex4")) {
            String hexString = Hex.encodeHexString(bytes);
            StringBuilder builder = new StringBuilder();
            for (int i = 0; i < hexString.length(); i += 4) {
                builder.append(hexString.substring(i, i + 4));
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/utils/Beautify.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/utils/Beautify.java on lines 26..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public static byte parseBytesbyte(byte[] bytes)
            throws ArrayIndexOutOfBoundsException {
        if (bytes.length > 1) {
            throw new ArrayIndexOutOfBoundsException(
                    "Byte array length exceeds 4!");
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/utils/ByteOperator.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/utils/ByteOperator.java on lines 35..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        } else if (mode.equalsIgnoreCase("hex2")) {
            String hexString = Hex.encodeHexString(bytes);
            StringBuilder builder = new StringBuilder();
            for (int i = 0; i < hexString.length(); i += 2) {
                builder.append(hexString.substring(i, i + 2));
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/utils/Beautify.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/utils/Beautify.java on lines 36..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

package in.ac.bits.protocolanalyzer.analyzer.link;

public final class EthernetHeader {
  public static final int DST_ADDR_START_BIT = 0;
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/analyzer/link/EthernetHeader.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/analyzer/transport/IcmpHeader.java on lines 1..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

package in.ac.bits.protocolanalyzer.analyzer.transport;

public final class IcmpHeader {
  public static final int TYPE__START_BIT = 0;
Severity: Major
Found in src/main/java/in/ac/bits/protocolanalyzer/analyzer/transport/IcmpHeader.java and 1 other location - About 1 hr to fix
src/main/java/in/ac/bits/protocolanalyzer/analyzer/link/EthernetHeader.java on lines 1..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    dashboardViewDisplay: function(){
        _this = this;
        loginCheck(function(result) {
            if (result) {
             view = new DashboardView();
Severity: Major
Found in src/main/webapp/WEB-INF/js/main.js and 4 other locations - About 1 hr to fix
src/main/webapp/WEB-INF/js/main.js on lines 63..71
src/main/webapp/WEB-INF/js/main.js on lines 72..80
src/main/webapp/WEB-INF/js/main.js on lines 81..89
src/main/webapp/WEB-INF/js/main.js on lines 90..98

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    experimentViewDisplay: function () {    
        _this = this;
        loginCheck(function(result) {
            if (result) {
             view = new ExperimentView();
Severity: Major
Found in src/main/webapp/WEB-INF/js/main.js and 4 other locations - About 1 hr to fix
src/main/webapp/WEB-INF/js/main.js on lines 72..80
src/main/webapp/WEB-INF/js/main.js on lines 81..89
src/main/webapp/WEB-INF/js/main.js on lines 90..98
src/main/webapp/WEB-INF/js/main.js on lines 99..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    loadViewDisplay: function(){
        _this = this;
        loginCheck(function(result) {
            if (result) {
             view = new LoadView();
Severity: Major
Found in src/main/webapp/WEB-INF/js/main.js and 4 other locations - About 1 hr to fix
src/main/webapp/WEB-INF/js/main.js on lines 63..71
src/main/webapp/WEB-INF/js/main.js on lines 72..80
src/main/webapp/WEB-INF/js/main.js on lines 81..89
src/main/webapp/WEB-INF/js/main.js on lines 99..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    analysisViewDisplay: function(){
        _this = this;
        loginCheck(function(result) {
            if (result) {
             view = new AnalysisView();
Severity: Major
Found in src/main/webapp/WEB-INF/js/main.js and 4 other locations - About 1 hr to fix
src/main/webapp/WEB-INF/js/main.js on lines 63..71
src/main/webapp/WEB-INF/js/main.js on lines 72..80
src/main/webapp/WEB-INF/js/main.js on lines 90..98
src/main/webapp/WEB-INF/js/main.js on lines 99..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language