Sign upLogin

preceptorjs/taxi

View on GitHub
Star

Showing 233 of 286 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Nightwatch.prototype.waitForElementNotVisible = function (selector, time, abortOnFailure, cb, message) {
    var msg = (message || "Element " + selector + " was visible in the page for " + time + " ms").replace('%s', selector).replace('%d', time);
    return when(this._driver.utils().waitUntil(function () {
        return when(this._driver.browser().activeWindow().getElements(selector), function (elements) {
            if (elements.length > 0) {
Severity: Major
Found in lib/compatibility/nightwatch.js and 1 other location - About 1 day to fix
lib/compatibility/nightwatch.js on lines 344..357

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 235.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Nightwatch.prototype.waitForElementVisible = function (selector, time, abortOnFailure, cb, message) {
    var msg = (message || "Element " + selector + " was not visible in the page for " + time + " ms").replace('%s', selector).replace('%d', time);
    return when(this._driver.utils().waitUntil(function () {
        return when(this._driver.browser().activeWindow().getElements(selector), function (elements) {
            if (elements.length > 0) {
Severity: Major
Found in lib/compatibility/nightwatch.js and 1 other location - About 1 day to fix
lib/compatibility/nightwatch.js on lines 316..329

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 235.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.waitForElementDisplay = function (selector, timeOut, abortOnFailure, callBack) {
    var activeWindow = this._driver.browser().activeWindow(),
        msg = "Element " + selector + " was not displayed in the page for " + timeOut + " ms";

    return when(this._driver.utils().waitUntil(function () {
Severity: Major
Found in lib/chain.js and 1 other location - About 1 day to fix
lib/chain.js on lines 2982..2999

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 229.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.waitForElementNotDisplayed = function (selector, timeOut, abortOnFailure, callBack) {
    var activeWindow = this._driver.browser().activeWindow(),
        msg = "Element " + selector + " was displayed in the page for " + timeOut + " ms";

    return when(this._driver.utils().waitUntil(function () {
Severity: Major
Found in lib/chain.js and 1 other location - About 1 day to fix
lib/chain.js on lines 3066..3083

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 229.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Nightwatch.prototype.waitForElementPresent = function (selector, time, abortOnFailure, cb, message) {
    var msg = (message || "Element " + selector + " was not in the page for " + time + " ms").replace('%s', selector).replace('%d', time);
    return when(this._driver.utils().waitUntil(function () {
        return when(this._driver.browser().activeWindow().getElements(selector), function (elements) {
            return (elements.length != 0);
Severity: Major
Found in lib/compatibility/nightwatch.js and 1 other location - About 1 day to fix
lib/compatibility/nightwatch.js on lines 303..314

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 207.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Nightwatch.prototype.waitForElementNotPresent = function (selector, time, abortOnFailure, cb, message) {
    var msg = (message || "Element " + selector + " was in the page for " + time + " ms").replace('%s', selector).replace('%d', time);
    return when(this._driver.utils().waitUntil(function () {
        return when(this._driver.browser().activeWindow().getElements(selector), function (elements) {
            return (elements.length == 0);
Severity: Major
Found in lib/compatibility/nightwatch.js and 1 other location - About 1 day to fix
lib/compatibility/nightwatch.js on lines 331..342

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 207.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Stitching.prototype.doesNeedStitching = function (options) {
    var needsStitching = this.getDriver().getValue('needsStitching');

    if (needsStitching === null) {
        return when(this._determineNeedsStitching(options), function (value) {
Severity: Major
Found in lib/helpers/stitching.js and 1 other location - About 5 hrs to fix
lib/helpers/devicePixelRatio.js on lines 90..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 143.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

DevicePixelRatio.prototype.getDevicePixelRatio = function (options) {
    var devicePixelRatio = this.getDriver().getValue('devicePixelRatio');

    if (devicePixelRatio === null) {
        return when(this._determineDevicePixelRatio(options), function (value) {
Severity: Major
Found in lib/helpers/devicePixelRatio.js and 1 other location - About 5 hrs to fix
lib/helpers/stitching.js on lines 86..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 143.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Touch.prototype.up = function (xOffset, yOffset) {
  type('xOffset', xOffset, 'Number');
  type('yOffset', yOffset, 'Number');
  return when(this._parent.getPosition(), function (location) {
    return this._driver.browser().activeWindow().touch().down(location.x + xOffset, location.y + yOffset);
Severity: Major
Found in lib/touch.js and 2 other locations - About 4 hrs to fix
lib/touch.js on lines 108..114
lib/touch.js on lines 162..168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Touch.prototype.down = function (xOffset, yOffset) {
  type('xOffset', xOffset, 'Number');
  type('yOffset', yOffset, 'Number');
  return when(this._parent.getPosition(), function (location) {
    return this._driver.browser().activeWindow().touch().down(location.x + xOffset, location.y + yOffset);
Severity: Major
Found in lib/touch.js and 2 other locations - About 4 hrs to fix
lib/touch.js on lines 135..141
lib/touch.js on lines 162..168

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Touch.prototype.moveTo = function (xOffset, yOffset) {
  type('xOffset', xOffset, 'Number');
  type('yOffset', yOffset, 'Number');
  return when(this._parent.getPosition(), function (location) {
    return this._driver.browser().activeWindow().touch().move(location.x + xOffset, location.y + yOffset);
Severity: Major
Found in lib/touch.js and 2 other locations - About 4 hrs to fix
lib/touch.js on lines 108..114
lib/touch.js on lines 135..141

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.navigateTo = function (url, callBack) {
    var activeWindow = this._driver.browser().activeWindow();

    return this._driverAction(activeWindow.navigator().navigateTo(url), function () {
        if (callBack) {
Severity: Major
Found in lib/chain.js and 1 other location - About 4 hrs to fix
lib/chain.js on lines 2747..2755

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.elementDblClickAt = function (selector, xOffset, yOffset, button, callBack) {
    return this._elementAction(selector, function (element, index) {
        return when(element.mouse().doubleClickAt(xOffset, yOffset), function () {
            if (callBack) {
                return this._scopeCallBack(callBack, [element, index]);
Severity: Major
Found in lib/chain.js and 1 other location - About 4 hrs to fix
lib/chain.js on lines 1372..1380

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.activateFrame = function (id, callBack) {
    var activeWindow = this._driver.browser().activeWindow();

    return this._driverAction(activeWindow.frame().activate(id), function () {
        if (callBack) {
Severity: Major
Found in lib/chain.js and 1 other location - About 4 hrs to fix
lib/chain.js on lines 2437..2445

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.elementClickAt = function (selector, xOffset, yOffset, button, callBack) {
    return this._elementAction(selector, function (element, index) {
        return when(element.mouse().clickAt(xOffset, yOffset), function () {
            if (callBack) {
                return this._scopeCallBack(callBack, [element, index]);
Severity: Major
Found in lib/chain.js and 1 other location - About 4 hrs to fix
lib/chain.js on lines 1460..1468

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Chain.prototype.dialogDismiss = function (callBack) {
    var activeWindow = this._driver.browser().activeWindow();

    return this._driverAction(activeWindow.alert().dismiss(), function () {
        if (callBack) {
Severity: Major
Found in lib/chain.js and 2 other locations - About 3 hrs to fix
lib/chain.js on lines 2562..2570
lib/chain.js on lines 2777..2785

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Chain.prototype.refresh = function (callBack) {
    var activeWindow = this._driver.browser().activeWindow();

    return this._driverAction(activeWindow.navigator().refresh(), function () {
        if (callBack) {
Severity: Major
Found in lib/chain.js and 2 other locations - About 3 hrs to fix
lib/chain.js on lines 2710..2718
lib/chain.js on lines 2777..2785

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Chain.prototype.activateParentFrame = function (callBack) {
    var activeWindow = this._driver.browser().activeWindow();

    return this._driverAction(activeWindow.frame().activateParent(), function () {
        if (callBack) {
Severity: Major
Found in lib/chain.js and 2 other locations - About 3 hrs to fix
lib/chain.js on lines 2562..2570
lib/chain.js on lines 2710..2718

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

Chain.prototype.elementHover = function (selector, callBack) {
    return this._elementAction(selector, function (element, index) {
        return when(element.mouse().moveToCenter(), function () {
            if (callBack) {
                return this._scopeCallBack(callBack, [element, index]);
Severity: Major
Found in lib/chain.js and 2 other locations - About 3 hrs to fix
lib/chain.js on lines 1638..1646
lib/chain.js on lines 1672..1680

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Chain.prototype.click = function (x, y, button, callBack) {
    var activeWindow = this._driver.browser().activeWindow();

    return this._driverAction(activeWindow.mouse().clickAt(x, y), function () {
        if (callBack) {
Severity: Major
Found in lib/chain.js and 1 other location - About 3 hrs to fix
lib/chain.js on lines 2368..2376

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language