Sign upLogin

rapid7/metasploit-framework

View on GitHub
Star

Showing 2,949 of 22,177 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def on_client_connect(client)
    @state[client] = { name: "#{client.peerhost}:#{client.peerport}", ip: client.peerhost, port: client.peerport, user: nil, pass: nil }
    client.put "220 SMTP Server Ready\r\n"
Severity: Minor
Found in modules/auxiliary/server/capture/smtp.rb and 1 other location - About 20 mins to fix
modules/auxiliary/server/capture/pop3.rb on lines 48..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  end
end
Severity: Minor
Found in modules/exploits/windows/misc/ms10_104_sharepoint.rb and 1 other location - About 20 mins to fix
modules/exploits/windows/misc/ms10_104_sharepoint.rb on lines 155..160

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    when 2
      aes = OpenSSL::Cipher.new('aes-128-cbc')
      aes.decrypt
      aes.key = bootkey
      aes.padding = 0
Severity: Minor
Found in modules/post/windows/gather/hashdump.rb and 1 other location - About 20 mins to fix
lib/msf/util/windows_registry/sam.rb on lines 35..41

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    register_options(
      [
        OptString.new('TARGETURI', [ true, "MoinMoin base path", "/" ]),
        OptString.new('WritablePage', [ true, "MoinMoin Page with edit permissions to inject the payload, by default WikiSandbox (Ex: /WikiSandbox)", "/WikiSandBox" ]),
        OptString.new('USERNAME', [ false,  "The user to authenticate as (anonymous if username not provided)"]),
Severity: Minor
Found in modules/exploits/unix/webapp/moinmoin_twikidraw.rb and 1 other location - About 20 mins to fix
modules/exploits/linux/http/cacti_unauthenticated_cmd_injection.rb on lines 96..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    unless version.build_number.between?(Msf::WindowsVersion::Server2008_SP0, Msf::WindowsVersion::Win10_21H2) ||
           version.build_number == Msf::WindowsVersion::Win11_21H2 ||
           version.build_number == Msf::WindowsVersion::Server2022
      return CheckCode::Safe('Target is not running a vulnerable version of Windows!')
    end
Severity: Minor
Found in modules/exploits/windows/local/cve_2022_26904_superprofile.rb and 1 other location - About 20 mins to fix
modules/exploits/windows/local/cve_2021_40449.rb on lines 83..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    begin
      framework.events.on_db_client(client) if client.new_record?
    rescue ::Exception => e
      wlog("Exception in on_db_client event handler: #{e.class}: #{e}")
      wlog("Call Stack\n#{e.backtrace.join("\n")}")
Severity: Minor
Found in lib/msf/core/db_manager/client.rb and 1 other location - About 20 mins to fix
lib/msf/core/db_manager/service.rb on lines 100..105

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            report_note(
              :host => datastore['RHOST'],
              :proto => 'tcp',
              :sname => 'xdb',
              :port => datastore['RPORT'],
Severity: Minor
Found in modules/auxiliary/scanner/oracle/xdb_sid_brute.rb and 1 other location - About 20 mins to fix
modules/auxiliary/scanner/oracle/xdb_sid_brute.rb on lines 266..274

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if res and res.code == 200 and res.body =~ /Loading styles and images/
      print_good("Authenticated as user '#{user}'")
      return true
    else
      print_error("Authenticating as user '#{user}' failed")
Severity: Minor
Found in modules/exploits/multi/http/processmaker_exec.rb and 1 other location - About 20 mins to fix
modules/exploits/unix/webapp/opensis_modname_exec.rb on lines 82..88

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    case t['Rop']
      when :msvcrt
        print_status("Using msvcrt ROP")
        rop = generate_rop_payload('msvcrt','',{'target'=>'xp', 'pivot'=>adjust})
Severity: Minor
Found in modules/exploits/windows/browser/msxml_get_definition_code_exec.rb and 1 other location - About 20 mins to fix
modules/exploits/windows/browser/ms12_037_same_id.rb on lines 127..134

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if res and res =~ /ERR 9/ and res =~ /#{exe_name}/ and res =~ /lasterror: 183/
        print_error("Upload failed, check the DEPTH option")
      end
      fail_with(Failure::UnexpectedReply, "#{peer} - Failed to upload #{exe_name}")
Severity: Minor
Found in modules/exploits/windows/misc/bigant_server_dupf_upload.rb and 1 other location - About 20 mins to fix
modules/exploits/windows/misc/bigant_server_dupf_upload.rb on lines 115..118

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      update_info(
        info,
        'Name' => 'Windows Gather Bitcoin Wallet',
        'Description' => %q{
          This module downloads any Bitcoin wallet files from the target
Severity: Minor
Found in modules/post/windows/gather/bitcoin_jacker.rb and 1 other location - About 20 mins to fix
modules/post/windows/gather/enum_db.rb on lines 13..32

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

       confluence_version.between?(Rex::Version.new('7.20.0'), Rex::Version.new('8.3.3')) ||
       confluence_version.between?(Rex::Version.new('8.4.0'), Rex::Version.new('8.4.3')) ||
       confluence_version.between?(Rex::Version.new('8.5.0'), Rex::Version.new('8.5.2')) ||
       confluence_version == Rex::Version.new('8.6.0')
      return Exploit::CheckCode::Appears("Exploitable version of Confluence: #{confluence_version}")
Severity: Minor
Found in modules/exploits/multi/http/atlassian_confluence_unauth_backup.rb and 1 other location - About 20 mins to fix
modules/exploits/multi/http/geoserver_unauth_rce_cve_2024_36401.rb on lines 172..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    register_options([
      OptString.new('TARGETURI', [true, 'The base path to Cacti', '/']),
      OptString.new('X_FORWARDED_FOR_IP', [true, 'The IP to use in the X-Forwarded-For HTTP header. This should be resolvable to a hostname in the poller table.', '127.0.0.1']),
      OptInt.new('HOST_ID', [false, 'The host_id value to use. By default, the module will try to bruteforce this.']),
      OptInt.new('LOCAL_DATA_ID', [false, 'The local_data_id value to use. By default, the module will try to bruteforce this.'])
Severity: Minor
Found in modules/exploits/linux/http/cacti_unauthenticated_cmd_injection.rb and 1 other location - About 20 mins to fix
modules/exploits/unix/webapp/moinmoin_twikidraw.rb on lines 58..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})

    super(merge_info(info,
      'Name'        => 'Android Meterpreter Shell, Reverse HTTP Inline',
      'Description' => 'Connect back to attacker and spawn a Meterpreter shell',
Severity: Minor
Found in modules/payloads/singles/android/meterpreter_reverse_http.rb and 1 other location - About 20 mins to fix
modules/payloads/singles/android/meterpreter_reverse_https.rb on lines 18..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if ((written_code == target[:patch] && !revert) || (written_code == target[:orig_code] && revert))
        print_status('Done!')
        raise Rex::Script::Completed
      else
        print_error('Failed!')
Severity: Minor
Found in modules/post/windows/escalate/screen_unlock.rb and 1 other location - About 20 mins to fix
scripts/meterpreter/screen_unlock.rb on lines 73..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def load_password_vars(credentials = nil)
    passwords = extract_words(datastore['PASS_FILE'])
    if datastore['PASSWORD']
      passwords.unshift datastore['PASSWORD']
      credentials = prepend_chosen_password(datastore['PASSWORD'], credentials) if credentials
Severity: Minor
Found in lib/msf/core/auxiliary/auth_brute.rb and 1 other location - About 20 mins to fix
lib/msf/core/auxiliary/auth_brute.rb on lines 450..456

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def new_from_string(type)
          case type
          when /^TYPE(\d+)$/
            new_from_num(Regexp.last_match(1).to_i)
          else
Severity: Minor
Found in lib/net/dns/rr/types.rb and 1 other location - About 20 mins to fix
lib/net/dns/rr/classes.rb on lines 90..100

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if self.junk_params
        rand(10)+5.times {
          params.push(Rex::Text.rand_text_alpha(rand(16) + 5) + '=' + Rex::Text.rand_text_alpha(rand(10) + 1))
Severity: Minor
Found in lib/rex/proto/http/request.rb and 1 other location - About 20 mins to fix
lib/rex/proto/http/request.rb on lines 192..194

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        table_os << ['Product', result.dig('windows_os_info', 'labels', 'product')]
        table_os << ['Version', result.dig('windows_os_info', 'labels', 'version')]
        table_os << ['Build Number', result.dig('windows_os_info', 'labels', 'build_number')]
Severity: Minor
Found in modules/auxiliary/gather/prometheus_node_exporter_gather.rb and 1 other location - About 20 mins to fix
modules/auxiliary/gather/prometheus_node_exporter_gather.rb on lines 256..258

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            report_note(
              :host => datastore['RHOST'],
              :proto => 'tcp',
              :sname => 'xdb',
              :port => datastore['RPORT'],
Severity: Minor
Found in modules/auxiliary/scanner/oracle/xdb_sid_brute.rb and 1 other location - About 20 mins to fix
modules/auxiliary/scanner/oracle/xdb_sid_brute.rb on lines 256..264

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language