Sign upLogin

rapid7/metasploit-framework

View on GitHub
Star

Showing 2,949 of 22,177 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def cleanup
    # Cleanup is called once for every single thread
    if ::Thread.current == @main_thread
      # Wait 5 seconds for background transfers to complete
      print_status("Providing some time for transfers to complete...")
Severity: Minor
Found in modules/auxiliary/scanner/snmp/cisco_upload_file.rb and 1 other location - About 25 mins to fix
modules/auxiliary/scanner/snmp/cisco_config_tftp.rb on lines 55..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def exploit
    print_status("Executing #{target.name} for #{datastore['PAYLOAD']}")

    case target['Type']
    when :unix_cmd
Severity: Minor
Found in modules/exploits/linux/http/saltstack_salt_wheel_async_rce.rb and 1 other location - About 25 mins to fix
modules/exploits/linux/http/saltstack_salt_api_cmd_exec.rb on lines 108..115

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if opts[:host].kind_of? ::Mdm::Host
        host = opts[:host]
      else
        host = report_host({:workspace => wspace, :host => opts[:host]})
        addr = Msf::Util::Host.normalize_host(opts[:host])
Severity: Minor
Found in lib/msf/core/db_manager/loot.rb and 1 other location - About 25 mins to fix
lib/msf/core/db_manager/vuln.rb on lines 123..127

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

      (stage_arch) and
      ((stager_arch & stage_arch).empty?))
      dlog("Stager #{stager_name} and stage #{stage_name} have incompatible architectures: #{stager_arch.join} - #{stage_arch.join}", 'core', LEV_2)
      return false
    end
Severity: Minor
Found in lib/msf/core/payload_set.rb and 3 other locations - About 25 mins to fix
lib/msf/core/payload_set.rb on lines 189..193
lib/msf/core/payload_set.rb on lines 212..216
lib/msf/core/payload_set.rb on lines 220..224

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if session
      print_status("Using existing session #{session.sid}")
      client = session.client
      self.simple = ::Rex::Proto::SMB::SimpleClient.new(client.dispatcher.tcp_socket, client: client)
    else
Severity: Minor
Found in modules/auxiliary/admin/smb/delete_file.rb and 1 other location - About 25 mins to fix
modules/auxiliary/admin/smb/upload_file.rb on lines 45..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def get_csrf(uri)
    vprint_status('Get "csrf" value')
    res = send_request_cgi(
      'method' => 'GET',
      'uri' => normalize_uri(uri),
Severity: Minor
Found in modules/exploits/multi/http/gitea_git_hooks_rce.rb and 1 other location - About 25 mins to fix
modules/exploits/multi/http/gogs_git_hooks_rce.rb on lines 189..202

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def generate_packet(data)
    pkt = "\x00\x00\x00\x00\x00\x00\x00\x01"
    pkt << [data.length + 1].pack("N*")
    pkt << "\x00\x00\x00\x00"
    pkt << "\x00\x00\x00\x00\x00\x00\x00\x00"
Severity: Minor
Found in modules/exploits/multi/misc/hp_vsa_exec.rb and 1 other location - About 25 mins to fix
modules/exploits/linux/misc/hp_vsa_login_bof.rb on lines 86..95

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

            'Platform'       => 'unix',
            'Arch'           => ARCH_CMD,
            'DefaultOptions' => {'PAYLOAD' => 'cmd/unix/reverse'},
            'Type'           => :unix_memory
          ],
Severity: Minor
Found in modules/exploits/unix/webapp/fusionpbx_operator_panel_exec_cmd_exec.rb and 3 other locations - About 25 mins to fix
modules/exploits/linux/http/opentsdb_yrange_cmd_injection.rb on lines 53..69
modules/exploits/linux/misc/aerospike_database_udf_cmd_exec.rb on lines 53..69
modules/exploits/unix/webapp/rconfig_install_cmd_exec.rb on lines 44..55

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

          [ 'Microsoft PowerPoint Viewer 2003',
            {
              'SEHOffset' => 132,
              'PopPopRet' => 0x30056471 # pop/pop/ret from PPTVIEW.exe v11.0.5703.0
            }
Severity: Minor
Found in modules/exploits/windows/fileformat/ms10_004_textbytesatom.rb and 3 other locations - About 25 mins to fix
modules/exploits/windows/http/sybase_easerver.rb on lines 44..47
modules/exploits/windows/http/ultraminihttp_bof.rb on lines 54..80
modules/exploits/windows/misc/itunes_extm3u_bof.rb on lines 62..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (r != nil and r[0] == self.sock)
        buf,host,port = self.sock.recvfrom(65535)
        # Lame compatabilitiy :-/
        from = [host, port]
        dispatch_request(from, buf)
Severity: Minor
Found in lib/rex/proto/dhcp/server.rb and 1 other location - About 25 mins to fix
lib/rex/proto/tftp/server.rb on lines 242..247

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if !datastore['VHOST'].nil? && !datastore['VHOST'].empty?
      referer = "http#{datastore['SSL'] ? 's' : ''}://#{datastore['VHOST']}/"
    else
      referer = full_uri
    end
Severity: Minor
Found in modules/auxiliary/gather/microweber_lfi.rb and 1 other location - About 25 mins to fix
modules/auxiliary/gather/microweber_lfi.rb on lines 141..145

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if good_response
      path = store_loot('ePMP_cmd_exec', 'text/plain', rhost, res.body, 'Cambium ePMP 1000 Command Exec Results')
      print_status("#{rhost}:#{rport} - Results saved in: #{path}")
    else
      print_error("#{rhost}:#{rport} - Failed to execute command(s).")
Severity: Minor
Found in modules/auxiliary/scanner/http/epmp1000_get_chart_cmd_exec.rb and 1 other location - About 25 mins to fix
modules/auxiliary/scanner/http/epmp1000_ping_cmd_exec.rb on lines 85..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def cmd_racer(*args)
    targ = args[0] || rhost()
    dom  = args[1] || "example.com"

    if !(targ and targ.length > 0)
Severity: Minor
Found in modules/auxiliary/spoof/dns/bailiwicked_domain.rb and 1 other location - About 25 mins to fix
modules/auxiliary/spoof/dns/bailiwicked_host.rb on lines 59..68

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    case START_TYPE[srv_info[:starttype]]
    when 'Disabled'
      vprint_error("Service startup is Disabled, so will be unable to exploit unless account has correct permissions...")
      return Exploit::CheckCode::Safe
    when 'Manual'
Severity: Minor
Found in modules/exploits/windows/local/ikeext_service.rb and 1 other location - About 25 mins to fix
modules/exploits/windows/local/webexec.rb on lines 81..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if datastore['MeterpreterDebugBuild']
      met.sub!(%q|define("MY_DEBUGGING", false);|, %Q|define("MY_DEBUGGING", true);|)

      logging_options = Msf::OptMeterpreterDebugLogging.parse_logging_options(datastore['MeterpreterDebugLogging'])
      met.sub!(%q|define("MY_DEBUGGING_LOG_FILE_PATH", false);|, %Q|define("MY_DEBUGGING_LOG_FILE_PATH", "#{logging_options[:rpath]}");|) if logging_options[:rpath]
Severity: Minor
Found in modules/payloads/stages/php/meterpreter.rb and 1 other location - About 25 mins to fix
modules/payloads/singles/php/meterpreter_reverse_tcp.rb on lines 42..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

              while(true)
                buff = recv(fd)
                self.banner << buff if buff
                if(self.banner =~ @login_regex or self.banner =~ @password_regex)
                  break
Severity: Minor
Found in lib/metasploit/framework/telnet/client.rb and 1 other location - About 25 mins to fix
lib/msf/core/exploit/remote/telnet.rb on lines 124..132

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    rescue ::Exception => e
      n = XCEPT::LoginError.new
      n.source = e
      if(e.respond_to?('error_code'))
        n.error_code   = e.error_code
Severity: Minor
Found in lib/rex/proto/smb/simple_client.rb and 1 other location - About 25 mins to fix
lib/rex/proto/smb/simple_client.rb on lines 145..153

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if !datastore['VHOST'].nil? && !datastore['VHOST'].empty?
      referer = "http#{datastore['SSL'] ? 's' : ''}://#{datastore['VHOST']}/"
    else
      referer = full_uri
    end
Severity: Minor
Found in modules/auxiliary/gather/microweber_lfi.rb and 1 other location - About 25 mins to fix
modules/auxiliary/gather/microweber_lfi.rb on lines 185..189

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def exploit
    print_status("Executing #{target.name} for #{datastore['PAYLOAD']}")

    case target['Type']
    when :unix_cmd
Severity: Minor
Found in modules/exploits/linux/http/saltstack_salt_api_cmd_exec.rb and 1 other location - About 25 mins to fix
modules/exploits/linux/http/saltstack_salt_wheel_async_rce.rb on lines 145..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      if (r != nil and r[0] == self.sock)
        buf,host,port = self.sock.recvfrom(65535)
        # Lame compatabilitiy :-/
        from = [host, port]
        dispatch_request(from, buf)
Severity: Minor
Found in lib/rex/proto/tftp/server.rb and 1 other location - About 25 mins to fix
lib/rex/proto/dhcp/server.rb on lines 174..179

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language