Sign upLogin

rapid7/metasploit-framework

View on GitHub
Star

Showing 7,361 of 22,177 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

          [ 'tshark 1.0.2-3+lenny7 on Debian 5.0.3 (x86)',
            # breakpoint: lwres.so + 0x2ce2
            {
              'Arch'      => ARCH_X86,
              'Platform'  => 'linux',
Severity: Major
Found in modules/exploits/multi/misc/wireshark_lwres_getaddrbyname_loop.rb and 1 other location - About 1 hr to fix
modules/exploits/multi/misc/wireshark_lwres_getaddrbyname.rb on lines 62..126

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    scanner = Metasploit::Framework::LoginScanner::VMAUTHD.new(
      configure_login_scanner(
        host: ip,
        port: rport,
        proxies: datastore['PROXIES'],
Severity: Major
Found in modules/auxiliary/scanner/vmware/vmauthd_login.rb and 2 other locations - About 1 hr to fix
modules/auxiliary/scanner/afp/afp_login.rb on lines 49..68
modules/auxiliary/scanner/db2/db2_auth.rb on lines 48..67

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    scanner = Metasploit::Framework::LoginScanner::DB2.new(
      configure_login_scanner(
        host: ip,
        port: rport,
        proxies: datastore['PROXIES'],
Severity: Major
Found in modules/auxiliary/scanner/db2/db2_auth.rb and 2 other locations - About 1 hr to fix
modules/auxiliary/scanner/afp/afp_login.rb on lines 49..68
modules/auxiliary/scanner/vmware/vmauthd_login.rb on lines 62..81

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    scanner = Metasploit::Framework::LoginScanner::AFP.new(
      configure_login_scanner(
        host: ip,
        port: rport,
        proxies: datastore['PROXIES'],
Severity: Major
Found in modules/auxiliary/scanner/afp/afp_login.rb and 2 other locations - About 1 hr to fix
modules/auxiliary/scanner/db2/db2_auth.rb on lines 48..67
modules/auxiliary/scanner/vmware/vmauthd_login.rb on lines 62..81

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        users.each do |u|
          user_folder = cmd_exec("/bin/ls -ma /Users/#{u}/").split(', ')
          next unless user_folder.include?("\.ssh")

          print_status(".gnupg Folder is present for #{u}")
Severity: Major
Found in modules/post/osx/gather/enum_osx.rb and 1 other location - About 1 hr to fix
modules/post/osx/gather/enum_osx.rb on lines 243..256

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'S.O.M.P.L 1.0 Player Buffer Overflow',
      'Description'    => %q{
          This module exploits a buffer overflow in Simple Open Music Player v1.0. When
Severity: Major
Found in modules/exploits/windows/fileformat/somplplayer_m3u.rb and 1 other location - About 1 hr to fix
modules/exploits/windows/fileformat/galan_fileformat_bof.rb on lines 11..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'DATAC RealWin SCADA Server SCPC_INITIALIZE_RF Buffer Overflow',
      'Description'    => %q{
          This module exploits a stack buffer overflow in DATAC Control
Severity: Major
Found in modules/exploits/windows/scada/realwin_scpc_initialize_rf.rb and 1 other location - About 1 hr to fix
modules/exploits/windows/scada/realwin_scpc_initialize.rb on lines 12..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'GLPI install.php Remote Command Execution',
      'Description'    => %q{
        This module exploits an arbitrary command execution vulnerability in the
Severity: Major
Found in modules/exploits/multi/http/glpi_install_rce.rb and 1 other location - About 1 hr to fix
modules/exploits/multi/http/vtiger_install_rce.rb on lines 13..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'Vtiger Install Unauthenticated Remote Command Execution',
      'Description'    => %q{
        This module exploits an arbitrary command execution vulnerability in the
Severity: Major
Found in modules/exploits/multi/http/vtiger_install_rce.rb and 1 other location - About 1 hr to fix
modules/exploits/multi/http/glpi_install_rce.rb on lines 11..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(
      update_info(
        info,
        'Name' => 'HP Easy Printer Care XMLSimpleAccessor Class ActiveX Control Remote Code Execution',
Severity: Major
Found in modules/exploits/windows/browser/hp_easy_printer_care_xmlsimpleaccessor.rb and 1 other location - About 1 hr to fix
modules/exploits/windows/browser/hp_easy_printer_care_xmlcachemgr.rb on lines 13..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(
      update_info(
        info,
        'Name' => 'HP Easy Printer Care XMLCacheMgr Class ActiveX Control Remote Code Execution',
Severity: Major
Found in modules/exploits/windows/browser/hp_easy_printer_care_xmlcachemgr.rb and 1 other location - About 1 hr to fix
modules/exploits/windows/browser/hp_easy_printer_care_xmlsimpleaccessor.rb on lines 13..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name' => 'gAlan 0.2.1 Buffer Overflow',
      'Description' => %q{
        This module exploits a stack buffer overflow in gAlan 0.2.1
Severity: Major
Found in modules/exploits/windows/fileformat/galan_fileformat_bof.rb and 1 other location - About 1 hr to fix
modules/exploits/windows/fileformat/somplplayer_m3u.rb on lines 11..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  SMB_SETUP_NTLMV2_HDR_PKT = Rex::Struct2::CStructTemplate.new(
    [ 'template', 'SMB',                 SMB_HDR ],
    [ 'uint8',   'AndX',                 0 ],
    [ 'uint8',   'Reserved1',            0 ],
    [ 'uint16v', 'AndXOffset',           0 ],
Severity: Major
Found in lib/rex/proto/smb/constants.rb and 1 other location - About 1 hr to fix
lib/rex/proto/smb/constants.rb on lines 1177..1192

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'DATAC RealWin SCADA Server SCPC_INITIALIZE Buffer Overflow',
      'Description'    => %q{
          This module exploits a stack buffer overflow in DATAC Control
Severity: Major
Found in modules/exploits/windows/scada/realwin_scpc_initialize.rb and 1 other location - About 1 hr to fix
modules/exploits/windows/scada/realwin_scpc_initialize_rf.rb on lines 12..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        users.each do |u|
          user_folder = cmd_exec("/bin/ls -ma /Users/#{u}/").split(', ')
          next unless user_folder.include?("\.ssh")

          print_status(".ssh Folder is present for #{u}")
Severity: Major
Found in modules/post/osx/gather/enum_osx.rb and 1 other location - About 1 hr to fix
modules/post/osx/gather/enum_osx.rb on lines 260..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  SMB_READ_HDR_PKT = Rex::Struct2::CStructTemplate.new(
    [ 'template', 'SMB',                 SMB_HDR ],
    [ 'uint8',    'AndX',                0 ],
    [ 'uint8',    'Reserved1',           0 ],
    [ 'uint16v',  'AndXOffset',          0 ],
Severity: Major
Found in lib/rex/proto/smb/constants.rb and 1 other location - About 1 hr to fix
lib/rex/proto/smb/constants.rb on lines 709..724

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def lsa_open_policy(dcerpc, server="\\")

    stubdata =
      # Server
      NDR.uwstring(server) +
Severity: Major
Found in modules/exploits/osx/samba/lsa_transnames_heap.rb and 3 other locations - About 1 hr to fix
lib/msf/core/exploit/remote/dcerpc_lsa.rb on lines 13..34
modules/exploits/linux/samba/lsa_transnames_heap.rb on lines 322..343
modules/exploits/solaris/samba/lsa_transnames_heap.rb on lines 187..208

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def lsa_open_policy(dcerpc, server="\\")
    stubdata =
      # Server
      NDR.uwstring(server) +
      # Object Attributes
Severity: Major
Found in modules/exploits/linux/samba/lsa_transnames_heap.rb and 3 other locations - About 1 hr to fix
lib/msf/core/exploit/remote/dcerpc_lsa.rb on lines 13..34
modules/exploits/osx/samba/lsa_transnames_heap.rb on lines 312..334
modules/exploits/solaris/samba/lsa_transnames_heap.rb on lines 187..208

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def lsa_open_policy(dcerpc, server="\\")
    stubdata =
      # Server
      NDR.uwstring(server) +
      # Object Attributes
Severity: Major
Found in modules/exploits/solaris/samba/lsa_transnames_heap.rb and 3 other locations - About 1 hr to fix
lib/msf/core/exploit/remote/dcerpc_lsa.rb on lines 13..34
modules/exploits/linux/samba/lsa_transnames_heap.rb on lines 322..343
modules/exploits/osx/samba/lsa_transnames_heap.rb on lines 312..334

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def lsa_open_policy(dcerpc, server="\\")
    stubdata =
      # Server
      NDR.uwstring(server) +
      # Object Attributes
Severity: Major
Found in lib/msf/core/exploit/remote/dcerpc_lsa.rb and 3 other locations - About 1 hr to fix
modules/exploits/linux/samba/lsa_transnames_heap.rb on lines 322..343
modules/exploits/osx/samba/lsa_transnames_heap.rb on lines 312..334
modules/exploits/solaris/samba/lsa_transnames_heap.rb on lines 187..208

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language