Sign upLogin

richrace/arctis-usb-finder

View on GitHub
Star

Showing 21 of 46 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (knownHeadphone.chargingStatusIdx) {
      switch (report[knownHeadphone.chargingStatusIdx]) {
        case 0: // Not Connected
          isConnected = false;
          isCharging = undefined;
Severity: Major
Found in src/use_cases/headsets/easy_battery_builder.ts and 1 other location - About 3 hrs to fix
src/use_cases/headsets/map_battery_builder.ts on lines 11..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    if (knownHeadphone.chargingStatusIdx) {
      switch (report[knownHeadphone.chargingStatusIdx]) {
        case 0: // Not Connected
          isConnected = false;
          isCharging = undefined;
Severity: Major
Found in src/use_cases/headsets/map_battery_builder.ts and 1 other location - About 3 hrs to fix
src/use_cases/headsets/easy_battery_builder.ts on lines 15..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      it('creates the MapBatteryBuilder builder with Arctis7_Plus_ProductID', () => {
        const deviceHash: DeviceToHeadphone = {
          hidDevice: {} as HID.Device,
          report: [1, 2, 1, 2],
          headphone: {
Severity: Major
Found in src/__tests__/use_cases/headsets/builder.test.ts and 4 other locations - About 3 hrs to fix
src/__tests__/use_cases/headsets/builder.test.ts on lines 43..54
src/__tests__/use_cases/headsets/builder.test.ts on lines 69..80
src/__tests__/use_cases/headsets/builder.test.ts on lines 82..93
src/__tests__/use_cases/headsets/builder.test.ts on lines 95..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      it('creates the MapBatteryBuilder builder with Arctis7P_Plus_ProductID', () => {
        const deviceHash: DeviceToHeadphone = {
          hidDevice: {} as HID.Device,
          report: [1, 2, 1, 2],
          headphone: {
Severity: Major
Found in src/__tests__/use_cases/headsets/builder.test.ts and 4 other locations - About 3 hrs to fix
src/__tests__/use_cases/headsets/builder.test.ts on lines 43..54
src/__tests__/use_cases/headsets/builder.test.ts on lines 56..67
src/__tests__/use_cases/headsets/builder.test.ts on lines 82..93
src/__tests__/use_cases/headsets/builder.test.ts on lines 95..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      it('creates the MapBatteryBuilder builder with Arctis7X_Plus_ProductID', () => {
        const deviceHash: DeviceToHeadphone = {
          hidDevice: {} as HID.Device,
          report: [1, 2, 1, 2],
          headphone: {
Severity: Major
Found in src/__tests__/use_cases/headsets/builder.test.ts and 4 other locations - About 3 hrs to fix
src/__tests__/use_cases/headsets/builder.test.ts on lines 43..54
src/__tests__/use_cases/headsets/builder.test.ts on lines 56..67
src/__tests__/use_cases/headsets/builder.test.ts on lines 69..80
src/__tests__/use_cases/headsets/builder.test.ts on lines 95..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      it('creates the MapBatteryBuilder builder with Arctis7_Plus_Destiny_ProductID', () => {
        const deviceHash: DeviceToHeadphone = {
          hidDevice: {} as HID.Device,
          report: [1, 2, 1, 2],
          headphone: {
Severity: Major
Found in src/__tests__/use_cases/headsets/builder.test.ts and 4 other locations - About 3 hrs to fix
src/__tests__/use_cases/headsets/builder.test.ts on lines 43..54
src/__tests__/use_cases/headsets/builder.test.ts on lines 56..67
src/__tests__/use_cases/headsets/builder.test.ts on lines 69..80
src/__tests__/use_cases/headsets/builder.test.ts on lines 82..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      it('creates the EasyBatteryBuilder builder with Arctis7X_ProductID', () => {
        const deviceHash: DeviceToHeadphone = {
          hidDevice: {} as HID.Device,
          report: [1, 2, 1, 2],
          headphone: {
Severity: Major
Found in src/__tests__/use_cases/headsets/builder.test.ts and 4 other locations - About 3 hrs to fix
src/__tests__/use_cases/headsets/builder.test.ts on lines 56..67
src/__tests__/use_cases/headsets/builder.test.ts on lines 69..80
src/__tests__/use_cases/headsets/builder.test.ts on lines 82..93
src/__tests__/use_cases/headsets/builder.test.ts on lines 95..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  it('knows if the device is discharging', () => {
    report = [0, 1, 3, 90, 3, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/easy_battery_builder.test.ts and 3 other locations - About 2 hrs to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 27..34
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 12..19
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 21..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  it('knows if the device is charging', () => {
    report = [0, 1, 3, 90, 1, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/easy_battery_builder.test.ts and 3 other locations - About 2 hrs to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 36..43
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 12..19
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 21..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  it('knowns the battery', () => {
    knownHeadphone = { batteryPercentIdx } as KnownHeadphone;
    report = [0, 1, 3, 90, 0, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/map_battery_builder.test.ts and 1 other location - About 2 hrs to fix
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 58..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  it('has 100% of the battery', () => {
    knownHeadphone = { batteryPercentIdx } as KnownHeadphone;
    report = [0, 5, 5, 90, 0, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/map_battery_builder.test.ts and 1 other location - About 2 hrs to fix
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 50..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  it('knows if the device is charging', () => {
    report = [0, 1, 1, 1, 1, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/map_battery_builder.test.ts and 3 other locations - About 2 hrs to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 27..34
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 36..43
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 21..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

  it('knows if the device is discharging', () => {
    report = [0, 1, 3, 3, 3, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/map_battery_builder.test.ts and 3 other locations - About 2 hrs to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 27..34
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 36..43
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 12..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('knows when the device is not muted', () => {
    report = [0, 1, 3, 90, 1, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/easy_battery_builder.test.ts and 2 other locations - About 1 hr to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 45..51
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 30..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('knows if the device is not connected', () => {
    report = [0, 1, 0, 0, 0, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/map_battery_builder.test.ts and 2 other locations - About 1 hr to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 19..25
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 45..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('knows if the device is not connected', () => {
    report = [0, 1, 3, 90, 0, 0];

    const simpleHeadphone = builder.execute(report, knownHeadphone);
Severity: Major
Found in src/__tests__/use_cases/headsets/easy_battery_builder.test.ts and 2 other locations - About 1 hr to fix
src/__tests__/use_cases/headsets/easy_battery_builder.test.ts on lines 19..25
src/__tests__/use_cases/headsets/map_battery_builder.test.ts on lines 30..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        try {
          hidDevice = new HID.HID(device.vendorId, device.productId);
        } catch {
          console.log("\tCouldn't connect");
          return {
Severity: Major
Found in src/use_cases/probe.ts and 1 other location - About 1 hr to fix
src/use_cases/probe.ts on lines 42..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        try {
          hidDevice = new HID.HID(devicePath);
        } catch {
          console.log("\tCouldn't connect");
          return {
Severity: Major
Found in src/use_cases/probe.ts and 1 other location - About 1 hr to fix
src/use_cases/probe.ts on lines 55..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('is true when running on a windows', () => {
    expect(Host.isWin()).toEqual(!Host.isMac() && !Host.isLinux());
  });
Severity: Major
Found in src/__tests__/utils/host.test.ts and 2 other locations - About 1 hr to fix
src/__tests__/utils/host.test.ts on lines 4..6
src/__tests__/utils/host.test.ts on lines 12..14

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('is true when running on a linux', () => {
    expect(Host.isLinux()).toEqual(!Host.isMac() && !Host.isWin());
  });
Severity: Major
Found in src/__tests__/utils/host.test.ts and 2 other locations - About 1 hr to fix
src/__tests__/utils/host.test.ts on lines 4..6
src/__tests__/utils/host.test.ts on lines 8..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language