silentbalanceyh/vertx-zero

View on GitHub

Showing 1,781 of 9,050 total issues

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.erp.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XNotice.java on lines 1..557
vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XTag.java on lines 1..555
vertx-pin/zero-graphic/src/main/java/cn/vertxup/graphic/domain/tables/pojos/GCluster.java on lines 1..565
vertx-pin/zero-psi/src/main/java/cn/vertxup/psi/domain/tables/pojos/PAmountSpec.java on lines 1..580
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SRole.java on lines 1..559
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/TplMessage.java on lines 1..571
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/UiForm.java on lines 1..564

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2637.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.psi.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XNotice.java on lines 1..557
vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XTag.java on lines 1..555
vertx-pin/zero-erp/src/main/java/cn/vertxup/erp/domain/tables/pojos/EDept.java on lines 1..557
vertx-pin/zero-graphic/src/main/java/cn/vertxup/graphic/domain/tables/pojos/GCluster.java on lines 1..565
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SRole.java on lines 1..559
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/TplMessage.java on lines 1..571
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/UiForm.java on lines 1..564

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2637.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ambient.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XTag.java on lines 1..555
vertx-pin/zero-erp/src/main/java/cn/vertxup/erp/domain/tables/pojos/EDept.java on lines 1..557
vertx-pin/zero-graphic/src/main/java/cn/vertxup/graphic/domain/tables/pojos/GCluster.java on lines 1..565
vertx-pin/zero-psi/src/main/java/cn/vertxup/psi/domain/tables/pojos/PAmountSpec.java on lines 1..580
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SRole.java on lines 1..559
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/TplMessage.java on lines 1..571
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/UiForm.java on lines 1..564

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2637.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ui.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XNotice.java on lines 1..557
vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XTag.java on lines 1..555
vertx-pin/zero-erp/src/main/java/cn/vertxup/erp/domain/tables/pojos/EDept.java on lines 1..557
vertx-pin/zero-graphic/src/main/java/cn/vertxup/graphic/domain/tables/pojos/GCluster.java on lines 1..565
vertx-pin/zero-psi/src/main/java/cn/vertxup/psi/domain/tables/pojos/PAmountSpec.java on lines 1..580
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SRole.java on lines 1..559
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/TplMessage.java on lines 1..571

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2637.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ambient.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XNotice.java on lines 1..557
vertx-pin/zero-erp/src/main/java/cn/vertxup/erp/domain/tables/pojos/EDept.java on lines 1..557
vertx-pin/zero-graphic/src/main/java/cn/vertxup/graphic/domain/tables/pojos/GCluster.java on lines 1..565
vertx-pin/zero-psi/src/main/java/cn/vertxup/psi/domain/tables/pojos/PAmountSpec.java on lines 1..580
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SRole.java on lines 1..559
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/TplMessage.java on lines 1..571
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/UiForm.java on lines 1..564

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2637.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ui.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XModule.java on lines 1..529
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MEntity.java on lines 1..533
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MIndex.java on lines 1..529
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SGroup.java on lines 1..531
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyBag.java on lines 1..527

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2483.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.tpl.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XModule.java on lines 1..529
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MEntity.java on lines 1..533
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MIndex.java on lines 1..529
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SGroup.java on lines 1..531
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/VTable.java on lines 1..545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2483.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.atom.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XModule.java on lines 1..529
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MEntity.java on lines 1..533
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SGroup.java on lines 1..531
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyBag.java on lines 1..527
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/VTable.java on lines 1..545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2483.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ambient.domain.tables.pojos;

vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MEntity.java on lines 1..533
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MIndex.java on lines 1..529
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SGroup.java on lines 1..531
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyBag.java on lines 1..527
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/VTable.java on lines 1..545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2483.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.atom.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XModule.java on lines 1..529
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MIndex.java on lines 1..529
vertx-pin/zero-rbac/src/main/java/cn/vertxup/rbac/domain/tables/pojos/SGroup.java on lines 1..531
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyBag.java on lines 1..527
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/VTable.java on lines 1..545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2483.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.rbac.domain.tables.pojos;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/pojos/XModule.java on lines 1..529
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MEntity.java on lines 1..533
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MIndex.java on lines 1..529
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyBag.java on lines 1..527
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/pojos/VTable.java on lines 1..545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2483.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.atom.domain.tables.pojos;

vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MAcc.java on lines 1..505
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/pojos/FCurrency.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyDesktop.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyTpl.java on lines 1..497

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2329.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.tpl.domain.tables.pojos;

vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MAcc.java on lines 1..505
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MKey.java on lines 1..497
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/pojos/FCurrency.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyTpl.java on lines 1..497

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2329.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.fm.domain.tables.pojos;

vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MAcc.java on lines 1..505
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MKey.java on lines 1..497
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyDesktop.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyTpl.java on lines 1..497

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2329.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.atom.domain.tables.pojos;

vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MKey.java on lines 1..497
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/pojos/FCurrency.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyDesktop.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyTpl.java on lines 1..497

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2329.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.tpl.domain.tables.pojos;

vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MAcc.java on lines 1..505
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/pojos/MKey.java on lines 1..497
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/pojos/FCurrency.java on lines 1..509
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/pojos/MyDesktop.java on lines 1..509

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2329.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ambient.domain.tables.records;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/records/XNumberRecord.java on lines 1..1048
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/records/MFieldRecord.java on lines 1..1040
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/records/FSettlementItemRecord.java on lines 1..1061
vertx-pin/zero-lbs/src/main/java/cn/vertxup/lbs/domain/tables/records/LLocationRecord.java on lines 1..1032
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/MySettingRecord.java on lines 1..1054
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/TplTicketRecord.java on lines 1..1050
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/records/UiListRecord.java on lines 1..1044

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2251.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ambient.domain.tables.records;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/records/XLinkageRecord.java on lines 1..1046
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/records/MFieldRecord.java on lines 1..1040
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/records/FSettlementItemRecord.java on lines 1..1061
vertx-pin/zero-lbs/src/main/java/cn/vertxup/lbs/domain/tables/records/LLocationRecord.java on lines 1..1032
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/MySettingRecord.java on lines 1..1054
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/TplTicketRecord.java on lines 1..1050
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/records/UiListRecord.java on lines 1..1044

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2251.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.ui.domain.tables.records;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/records/XLinkageRecord.java on lines 1..1046
vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/records/XNumberRecord.java on lines 1..1048
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/records/MFieldRecord.java on lines 1..1040
vertx-pin/zero-fm/src/main/java/cn/vertxup/fm/domain/tables/records/FSettlementItemRecord.java on lines 1..1061
vertx-pin/zero-lbs/src/main/java/cn/vertxup/lbs/domain/tables/records/LLocationRecord.java on lines 1..1032
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/MySettingRecord.java on lines 1..1054
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/TplTicketRecord.java on lines 1..1050

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2251.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

/*
 * This file is generated by jOOQ.
 */
package cn.vertxup.fm.domain.tables.records;

vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/records/XLinkageRecord.java on lines 1..1046
vertx-pin/zero-ambient/src/main/java/cn/vertxup/ambient/domain/tables/records/XNumberRecord.java on lines 1..1048
vertx-pin/zero-atom/src/main/java/cn/vertxup/atom/domain/tables/records/MFieldRecord.java on lines 1..1040
vertx-pin/zero-lbs/src/main/java/cn/vertxup/lbs/domain/tables/records/LLocationRecord.java on lines 1..1032
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/MySettingRecord.java on lines 1..1054
vertx-pin/zero-tpl/src/main/java/cn/vertxup/tpl/domain/tables/records/TplTicketRecord.java on lines 1..1050
vertx-pin/zero-ui/src/main/java/cn/vertxup/ui/domain/tables/records/UiListRecord.java on lines 1..1044

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 2251.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language