Sign upLogin

skofgar/mercury

View on GitHub
Star

Showing 244 of 821 total issues

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    @Override
    public int partitionCount(String topic) throws IOException {
        try {
            EventEnvelope response = PostOffice.getInstance().request(cloudManager, 20000,
                    new Kv(TYPE, PARTITIONS), new Kv(TOPIC, topic));
Severity: Major
Found in connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/services/PubSubManager.java and 3 other locations - About 1 hr to fix
connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/services/PubSubManager.java on lines 308..321
connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/PubSubManager.java on lines 253..266
connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/PubSubManager.java on lines 202..215

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    @Override
    public int partitionCount(String topic) throws IOException {
        try {
            EventEnvelope response = PostOffice.getInstance().request(cloudManager, 20000,
                    new Kv(TYPE, PARTITIONS), new Kv(TOPIC, topic));
Severity: Major
Found in connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/services/PubSubManager.java and 3 other locations - About 1 hr to fix
connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/PubSubManager.java on lines 253..266
connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/PubSubManager.java on lines 202..215
connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/services/PubSubManager.java on lines 302..315

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            connection.setExceptionListener((e) -> {
                String error = e.getMessage();
                log.error("Activemq cluster exception - {}", error);
                if (error != null && (error.contains("terminated") || error.contains("disconnect"))) {
                    ArtemisConnector.stopConnection(domain);
Severity: Major
Found in connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/ArtemisConnector.java and 1 other location - About 1 hr to fix
connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/TibcoConnector.java on lines 144..151

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            connection.setExceptionListener((e) -> {
                String error = e.getMessage();
                log.error("Tibco cluster exception - {}", error);
                if (error != null && (error.contains("terminated") || error.contains("disconnect"))) {
                    TibcoConnector.stopConnection(domain);
Severity: Major
Found in connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/TibcoConnector.java and 1 other location - About 1 hr to fix
connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/ArtemisConnector.java on lines 116..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    @Override
    public boolean exists(String topic) throws IOException {
        try {
            EventEnvelope response = PostOffice.getInstance().request(cloudManager, 20000,
                    new Kv(TYPE, EXISTS), new Kv(TOPIC, topic));
Severity: Major
Found in connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/PubSubManager.java and 3 other locations - About 1 hr to fix
connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/services/PubSubManager.java on lines 293..306
connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/PubSubManager.java on lines 187..200
connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/services/PubSubManager.java on lines 287..300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (CREATE.equals(headers.get(TYPE)) && headers.containsKey(TOPIC)) {
                int partitions = headers.containsKey(PARTITIONS)?
                                    Math.max(1, Utility.getInstance().str2int(headers.get(PARTITIONS))) : 1;
                createTopic(headers.get(TOPIC), partitions);
                return true;
Severity: Major
Found in connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/TopicManager.java and 1 other location - About 1 hr to fix
connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/TopicManager.java on lines 107..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (value == null) {
                v = "";
            } else if (value instanceof String) {
                v = (String) value;
            } else if (value instanceof Date) {
Severity: Major
Found in extensions/simple-scheduler/src/main/java/org/platformlambda/quartz/models/ScheduledJob.java and 1 other location - About 1 hr to fix
system/platform-core/src/main/java/org/platformlambda/core/models/EventEnvelope.java on lines 502..510

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    @Override
    public boolean exists(String topic) throws IOException {
        try {
            EventEnvelope response = PostOffice.getInstance().request(cloudManager, 20000,
                    new Kv(TYPE, EXISTS), new Kv(TOPIC, topic));
Severity: Major
Found in connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/services/PubSubManager.java and 3 other locations - About 1 hr to fix
connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/PubSubManager.java on lines 238..251
connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/PubSubManager.java on lines 187..200
connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/services/PubSubManager.java on lines 287..300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (CREATE.equals(headers.get(TYPE)) && headers.containsKey(TOPIC)) {
                int partitions = headers.containsKey(PARTITIONS)?
                                    Math.max(1, Utility.getInstance().str2int(headers.get(PARTITIONS))) : 1;
                createTopic(headers.get(TOPIC), partitions);
                return true;
Severity: Major
Found in connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/TopicManager.java and 1 other location - About 1 hr to fix
connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/TopicManager.java on lines 68..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (origin.equals(Platform.getInstance().getOrigin())) {
            event.setTo(PostOffice.ACTUATOR_SERVICES);
        } else {
            if (!po.exists(origin)) {
                response.sendError(404, origin+" is not reachable");
Severity: Major
Found in system/rest-spring/src/main/java/org/platformlambda/servlets/ShutdownServlet.java and 1 other location - About 1 hr to fix
system/rest-spring/src/main/java/org/platformlambda/servlets/SuspendResume.java on lines 52..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    @Override
    public boolean exists(String topic) throws IOException {
        try {
            EventEnvelope response = PostOffice.getInstance().request(cloudManager, 20000,
                    new Kv(TYPE, EXISTS), new Kv(TOPIC, topic));
Severity: Major
Found in connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/services/PubSubManager.java and 3 other locations - About 1 hr to fix
connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/services/PubSubManager.java on lines 293..306
connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/PubSubManager.java on lines 238..251
connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/PubSubManager.java on lines 187..200

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        for (int i=0; i < total; i++) {
            EventEnvelope event = new EventEnvelope();
            event.setTo("hello.world");
            event.setBody(forward);
            event.setHeader("request", "#"+(i+1));
Severity: Major
Found in examples/rest-example/src/main/java/com/accenture/examples/rest/AsyncHelloConcurrent.java and 2 other locations - About 1 hr to fix
examples/rest-example/src/main/java/com/accenture/examples/rest/RpcHelloConcurrent.java on lines 57..63
extensions/api-playground/src/main/java/com/accenture/examples/rest/HelloConcurrent.java on lines 56..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        for (int i=0; i < TOTAL; i++) {
            EventEnvelope event = new EventEnvelope();
            event.setTo("hello.world");
            event.setBody(forward);
            event.setHeader("request", "#"+(i+1));
Severity: Major
Found in examples/rest-example/src/main/java/com/accenture/examples/rest/RpcHelloConcurrent.java and 2 other locations - About 1 hr to fix
examples/rest-example/src/main/java/com/accenture/examples/rest/AsyncHelloConcurrent.java on lines 61..67
extensions/api-playground/src/main/java/com/accenture/examples/rest/HelloConcurrent.java on lines 56..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if (value == null) {
                v = "";
            } else if (value instanceof String) {
                v = (String) value;
            } else if (value instanceof Date) {
Severity: Major
Found in system/platform-core/src/main/java/org/platformlambda/core/models/EventEnvelope.java and 1 other location - About 1 hr to fix
extensions/simple-scheduler/src/main/java/org/platformlambda/quartz/models/ScheduledJob.java on lines 53..61

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (origin.equals(Platform.getInstance().getOrigin())) {
            event.setTo(PostOffice.ACTUATOR_SERVICES);
        } else {
            if (!po.exists(origin)) {
                response.sendError(404, origin+" is not reachable");
Severity: Major
Found in system/rest-spring/src/main/java/org/platformlambda/servlets/SuspendResume.java and 1 other location - About 1 hr to fix
system/rest-spring/src/main/java/org/platformlambda/servlets/ShutdownServlet.java on lines 56..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

        for (int i=0; i < TOTAL; i++) {
            EventEnvelope event = new EventEnvelope();
            event.setTo("hello.world");
            event.setBody(forwardHeaders);
            event.setHeader("request", "#"+(i+1));
Severity: Major
Found in extensions/api-playground/src/main/java/com/accenture/examples/rest/HelloConcurrent.java and 2 other locations - About 1 hr to fix
examples/rest-example/src/main/java/com/accenture/examples/rest/AsyncHelloConcurrent.java on lines 61..67
examples/rest-example/src/main/java/com/accenture/examples/rest/RpcHelloConcurrent.java on lines 57..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    @Override
    public boolean exists(String topic) throws IOException {
        try {
            EventEnvelope response = PostOffice.getInstance().request(cloudManager, 20000,
                                        new Kv(TYPE, EXISTS), new Kv(TOPIC, topic));
Severity: Major
Found in connectors/adapters/kafka/kafka-connector/src/main/java/org/platformlambda/kafka/services/PubSubManager.java and 3 other locations - About 1 hr to fix
connectors/adapters/activemq/activemq-connector/src/main/java/org/platformlambda/activemq/services/PubSubManager.java on lines 293..306
connectors/adapters/hazelcast/hazelcast-connector/src/main/java/org/platformlambda/hazelcast/services/PubSubManager.java on lines 238..251
connectors/adapters/tibco/tibco-connector/src/main/java/org/platformlambda/tibco/services/PubSubManager.java on lines 287..300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public byte[] int2bytes(int val) {
        byte[] results = new byte[4];

        for (int idx=3; idx >=0; --idx) {
            results[idx] = (byte) (val & 0xFF);
Severity: Major
Found in system/platform-core/src/main/java/org/platformlambda/core/util/Utility.java and 1 other location - About 1 hr to fix
system/platform-core/src/main/java/org/platformlambda/core/util/Utility.java on lines 535..542

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (SUBSCRIBE_LIFE_CYCLE.equals(type) && headers.containsKey(ROUTE)) {
            String subscriber = headers.get(ROUTE);
            if (!subscriber.contains("@") && !lifeCycleSubscribers.containsKey(subscriber)) {
                lifeCycleSubscribers.put(subscriber, true);
                log.info("{} subscribed to member life-cycle events", subscriber);
Severity: Major
Found in connectors/core/cloud-connector/src/main/java/org/platformlambda/cloud/services/ServiceRegistry.java and 1 other location - About 1 hr to fix
connectors/core/cloud-connector/src/main/java/org/platformlambda/cloud/services/ServiceRegistry.java on lines 168..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public byte[] long2bytes(long val) {
        byte[] results = new byte[8];
        for (int idx=7; idx >=0; --idx) {
            results[idx] = (byte) (val & 0xFF);
            val = val >> 8;
Severity: Major
Found in system/platform-core/src/main/java/org/platformlambda/core/util/Utility.java and 1 other location - About 1 hr to fix
system/platform-core/src/main/java/org/platformlambda/core/util/Utility.java on lines 512..520

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language