strongqa/howitzer

View on GitHub

Showing 12 of 14 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

RSpec.configure do |config|
  Howitzer::Log.settings_as_formatted_text

  Howitzer::Cache.store(:cloud, :start_time, Time.now.utc)
  Howitzer::Cache.store(:cloud, :status, true)
Severity: Major
Found in generators/turnip/templates/spec_helper.rb and 1 other location - About 5 hrs to fix
generators/rspec/templates/spec_helper.rb on lines 7..55

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 175.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

RSpec.configure do |config|
  Howitzer::Log.settings_as_formatted_text

  Howitzer::Cache.store(:cloud, :start_time, Time.now.utc)
  Howitzer::Cache.store(:cloud, :status, true)
Severity: Major
Found in generators/rspec/templates/spec_helper.rb and 1 other location - About 5 hrs to fix
generators/turnip/templates/spec_helper.rb on lines 6..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 175.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  ff_profile = Selenium::WebDriver::Firefox::Profile.new.tap do |profile|
    profile['network.http.phishy-userpass-length'] = 255
    profile['browser.safebrowsing.malware.enabled'] = false
    profile['network.automatic-ntlm-auth.allow-non-fqdn'] = true
    profile['network.ntlm.send-lm-response'] = true
Severity: Minor
Found in generators/config/templates/drivers/headless_firefox.rb and 1 other location - About 45 mins to fix
generators/config/templates/drivers/selenium.rb on lines 6..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    ff_profile = Selenium::WebDriver::Firefox::Profile.new.tap do |profile|
      profile['network.http.phishy-userpass-length'] = 255
      profile['browser.safebrowsing.malware.enabled'] = false
      profile['network.automatic-ntlm-auth.allow-non-fqdn'] = true
      profile['network.ntlm.send-lm-response'] = true
Severity: Minor
Found in generators/config/templates/drivers/selenium.rb and 1 other location - About 45 mins to fix
generators/config/templates/drivers/headless_firefox.rb on lines 6..12

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

  if Howitzer.user_agent.present?
    if CapybaraHelpers.chrome_browser?
      caps['chromeOptions'] = { 'args' => ["--user-agent=#{Howitzer.user_agent}"] }
    elsif CapybaraHelpers.ff_browser?
      profile = Selenium::WebDriver::Firefox::Profile.new
Severity: Major
Found in generators/config/templates/drivers/selenium_grid.rb and 4 other locations - About 35 mins to fix
generators/config/templates/drivers/browserstack.rb on lines 8..15
generators/config/templates/drivers/crossbrowsertesting.rb on lines 13..20
generators/config/templates/drivers/sauce.rb on lines 10..17
generators/config/templates/drivers/testingbot.rb on lines 9..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

  if Howitzer.user_agent.present?
    if CapybaraHelpers.chrome_browser?
      caps['chromeOptions'] = { 'args' => ["--user-agent=#{Howitzer.user_agent}"] }
    elsif CapybaraHelpers.ff_browser?
      profile = Selenium::WebDriver::Firefox::Profile.new
Severity: Major
Found in generators/config/templates/drivers/testingbot.rb and 4 other locations - About 35 mins to fix
generators/config/templates/drivers/browserstack.rb on lines 8..15
generators/config/templates/drivers/crossbrowsertesting.rb on lines 13..20
generators/config/templates/drivers/sauce.rb on lines 10..17
generators/config/templates/drivers/selenium_grid.rb on lines 17..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

  if Howitzer.user_agent.present?
    if CapybaraHelpers.chrome_browser?
      caps['chromeOptions'] = { 'args' => ["--user-agent=#{Howitzer.user_agent}"] }
    elsif CapybaraHelpers.ff_browser?
      profile = Selenium::WebDriver::Firefox::Profile.new
Severity: Major
Found in generators/config/templates/drivers/crossbrowsertesting.rb and 4 other locations - About 35 mins to fix
generators/config/templates/drivers/browserstack.rb on lines 8..15
generators/config/templates/drivers/sauce.rb on lines 10..17
generators/config/templates/drivers/selenium_grid.rb on lines 17..24
generators/config/templates/drivers/testingbot.rb on lines 9..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

  if Howitzer.user_agent.present?
    if CapybaraHelpers.chrome_browser?
      caps['chromeOptions'] = { 'args' => ["--user-agent=#{Howitzer.user_agent}"] }
    elsif CapybaraHelpers.ff_browser?
      profile = Selenium::WebDriver::Firefox::Profile.new
Severity: Major
Found in generators/config/templates/drivers/sauce.rb and 4 other locations - About 35 mins to fix
generators/config/templates/drivers/browserstack.rb on lines 8..15
generators/config/templates/drivers/crossbrowsertesting.rb on lines 13..20
generators/config/templates/drivers/selenium_grid.rb on lines 17..24
generators/config/templates/drivers/testingbot.rb on lines 9..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

  if Howitzer.user_agent.present?
    if CapybaraHelpers.chrome_browser?
      caps['chromeOptions'] = { 'args' => ["--user-agent=#{Howitzer.user_agent}"] }
    elsif CapybaraHelpers.ff_browser?
      profile = Selenium::WebDriver::Firefox::Profile.new
Severity: Major
Found in generators/config/templates/drivers/browserstack.rb and 4 other locations - About 35 mins to fix
generators/config/templates/drivers/crossbrowsertesting.rb on lines 13..20
generators/config/templates/drivers/sauce.rb on lines 10..17
generators/config/templates/drivers/selenium_grid.rb on lines 17..24
generators/config/templates/drivers/testingbot.rb on lines 9..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      def self.find(recipient, subject, wait:)
        message = {}
        retryable(find_retry_params(wait)) { message = get_message(recipient, subject) }
        return new(message) if message.present?

Severity: Minor
Found in lib/howitzer/mail_adapters/gmail.rb and 2 other locations - About 25 mins to fix
lib/howitzer/mail_adapters/mailgun.rb on lines 16..22
lib/howitzer/mail_adapters/mailtrap.rb on lines 15..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      def self.find(recipient, subject, wait:)
        message = {}
        retryable(find_retry_params(wait)) { message = retrieve_message(recipient, subject) }
        return new(message) if message.present?

Severity: Minor
Found in lib/howitzer/mail_adapters/mailgun.rb and 2 other locations - About 25 mins to fix
lib/howitzer/mail_adapters/gmail.rb on lines 15..21
lib/howitzer/mail_adapters/mailtrap.rb on lines 15..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      def self.find(recipient, subject, wait:)
        message = {}
        retryable(find_retry_params(wait)) { message = retrieve_message(recipient, subject) }
        return new(message) if message.present?

Severity: Minor
Found in lib/howitzer/mail_adapters/mailtrap.rb and 2 other locations - About 25 mins to fix
lib/howitzer/mail_adapters/gmail.rb on lines 15..21
lib/howitzer/mail_adapters/mailgun.rb on lines 16..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language