yast/yast-bootloader

View on GitHub

Showing 12 of 81 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      def import_grub2(data, bootloader)
        return unless bootloader.name == "grub2"

        GRUB2_BOOLEAN_MAPPING.each do |key, method|
          val = data.global.public_send(key)
Severity: Minor
Found in src/lib/bootloader/autoyast_converter.rb and 1 other location - About 25 mins to fix
src/lib/bootloader/autoyast_converter.rb on lines 108..115

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      def import_grub2efi(data, bootloader)
        return unless bootloader.name == "grub2-efi"

        GRUB2EFI_BOOLEAN_MAPPING.each do |key, method|
          val = data.global.public_send(key)
Severity: Minor
Found in src/lib/bootloader/autoyast_converter.rb and 1 other location - About 25 mins to fix
src/lib/bootloader/autoyast_converter.rb on lines 97..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    class UpdateNvramWidget < CWM::CheckBox
      include Grub2Helper

      def initialize
        textdomain "bootloader"
Severity: Minor
Found in src/lib/bootloader/grub2_widgets.rb and 3 other locations - About 25 mins to fix
src/lib/bootloader/grub2_widgets.rb on lines 92..122
src/lib/bootloader/grub2_widgets.rb on lines 186..213
src/lib/bootloader/systemdboot_widgets.rb on lines 53..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    class ActivateWidget < CWM::CheckBox
      include Grub2Helper

      def initialize
        textdomain "bootloader"
Severity: Minor
Found in src/lib/bootloader/grub2_widgets.rb and 3 other locations - About 25 mins to fix
src/lib/bootloader/grub2_widgets.rb on lines 186..213
src/lib/bootloader/grub2_widgets.rb on lines 455..480
src/lib/bootloader/systemdboot_widgets.rb on lines 53..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    class SecureBootWidget < CWM::CheckBox
      include SystemdBootHelper

      def initialize
        textdomain "bootloader"
Severity: Minor
Found in src/lib/bootloader/systemdboot_widgets.rb and 3 other locations - About 25 mins to fix
src/lib/bootloader/grub2_widgets.rb on lines 92..122
src/lib/bootloader/grub2_widgets.rb on lines 186..213
src/lib/bootloader/grub2_widgets.rb on lines 455..480

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    class GenericMBRWidget < CWM::CheckBox
      include Grub2Helper

      def initialize
        textdomain "bootloader"
Severity: Minor
Found in src/lib/bootloader/grub2_widgets.rb and 3 other locations - About 25 mins to fix
src/lib/bootloader/grub2_widgets.rb on lines 92..122
src/lib/bootloader/grub2_widgets.rb on lines 455..480
src/lib/bootloader/systemdboot_widgets.rb on lines 53..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      def s390_secure_boot_available?
        # see jsc#SLE-9425
        return false unless Yast::Arch.s390

        res = File.read("/sys/firmware/ipl/has_secure", 1)
Severity: Minor
Found in src/lib/bootloader/systeminfo.rb and 1 other location - About 20 mins to fix
src/lib/bootloader/systeminfo.rb on lines 174..183

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      def s390_secure_boot_active?
        return false unless Yast::Arch.s390

        # see jsc#SLE-9425
        res = File.read("/sys/firmware/ipl/secure", 1)
Severity: Minor
Found in src/lib/bootloader/systeminfo.rb and 1 other location - About 20 mins to fix
src/lib/bootloader/systeminfo.rb on lines 145..154

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def update_nvram_summary
      link = if update_nvram
        "<a href=\"disable_update_nvram\">(#{_("disable")})</a>"
      else
        "<a href=\"enable_update_nvram\">(#{_("enable")})</a>"
Severity: Minor
Found in src/lib/bootloader/grub2base.rb and 3 other locations - About 15 mins to fix
src/lib/bootloader/grub2base.rb on lines 422..429
src/lib/bootloader/grub2base.rb on lines 435..442
src/lib/bootloader/systemdboot.rb on lines 82..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def secure_boot_summary
      link = if secure_boot
        "<a href=\"disable_secure_boot\">(#{_("disable")})</a>"
      else
        "<a href=\"enable_secure_boot\">(#{_("enable")})</a>"
Severity: Minor
Found in src/lib/bootloader/systemdboot.rb and 3 other locations - About 15 mins to fix
src/lib/bootloader/grub2base.rb on lines 422..429
src/lib/bootloader/grub2base.rb on lines 435..442
src/lib/bootloader/grub2base.rb on lines 448..455

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def secure_boot_summary
      link = if secure_boot
        "<a href=\"disable_secure_boot\">(#{_("disable")})</a>"
      else
        "<a href=\"enable_secure_boot\">(#{_("enable")})</a>"
Severity: Minor
Found in src/lib/bootloader/grub2base.rb and 3 other locations - About 15 mins to fix
src/lib/bootloader/grub2base.rb on lines 435..442
src/lib/bootloader/grub2base.rb on lines 448..455
src/lib/bootloader/systemdboot.rb on lines 82..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    def trusted_boot_summary
      link = if trusted_boot
        "<a href=\"disable_trusted_boot\">(#{_("disable")})</a>"
      else
        "<a href=\"enable_trusted_boot\">(#{_("enable")})</a>"
Severity: Minor
Found in src/lib/bootloader/grub2base.rb and 3 other locations - About 15 mins to fix
src/lib/bootloader/grub2base.rb on lines 422..429
src/lib/bootloader/grub2base.rb on lines 448..455
src/lib/bootloader/systemdboot.rb on lines 82..89

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language