Sign upLogin

yieldbot/sensu-yieldbot-plugins

View on GitHub
Star

Showing 25 of 34 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in plugins/bongo/check-betty-health.py and 1 other location - About 6 days to fix
plugins/bongo/check-goliad-health.py on lines 0..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 636.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in plugins/bongo/check-goliad-health.py and 1 other location - About 6 days to fix
plugins/bongo/check-betty-health.py on lines 0..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 636.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in plugins/bongo/check-bongo-mismatch.py and 1 other location - About 5 days to fix
plugins/bongo/check-bongo-health.py on lines 0..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 590.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in plugins/bongo/check-bongo-health.py and 1 other location - About 5 days to fix
plugins/bongo/check-bongo-mismatch.py on lines 0..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 590.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    for i in range(len(indices)):
        conn = httplib.HTTPConnection(cluster)
        conn.request("GET", "/" + indices[i])
        res = conn.getresponse()
        conn.close()
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-index.py and 2 other locations - About 1 day to fix
plugins/elasticsearch/check-es-tribe-index.py on lines 29..39
plugins/elasticsearch/check-es-tribe-index.py on lines 53..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 137.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    for i in range(len(indices)):
        conn = httplib.HTTPConnection(cluster)
        conn.request("GET", "/" + indices[i])
        res = conn.getresponse()
        conn.close()
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-index.py and 2 other locations - About 1 day to fix
plugins/elasticsearch/check-es-tribe-index.py on lines 29..39
plugins/elasticsearch/check-es-tribe-index.py on lines 76..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 137.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    for i in range(len(indices)):
        conn = httplib.HTTPConnection(cluster)
        conn.request("GET", "/" + indices[i])
        res = conn.getresponse()
        conn.close()
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-index.py and 2 other locations - About 1 day to fix
plugins/elasticsearch/check-es-tribe-index.py on lines 53..63
plugins/elasticsearch/check-es-tribe-index.py on lines 76..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 137.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    try:
        cluster = "analytics-hotevents.elasticsearch.service.consul:9200"
        check_hotevents_cluster(cluster)
    except (TypeError, httplib.IncompleteRead) as e:
        OUTPUT.append(" `check_hotevents_cluster:` host=%s, got exception: %s" % (myname,e))
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-index.py and 1 other location - About 3 hrs to fix
plugins/elasticsearch/check-es-tribe-index.py on lines 112..118

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 68.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    try:
        cluster = "analytics-coldevents.elasticsearch.service.consul:9200"
        check_coldevents_cluster(cluster)
    except (TypeError, httplib.IncompleteRead) as e:
        OUTPUT.append(" `check_coldevents_cluster:` host=%s, got exception: %s" % (myname,e))
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-index.py and 1 other location - About 3 hrs to fix
plugins/elasticsearch/check-es-tribe-index.py on lines 103..109

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 68.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    if r1.status >= 300:  # pylint: disable=E1101
        msg = "check_es_indexstatus: host=%s received non-2xx resp=%s"%(myname, r1.status)
        print msg
        sys.exit(CHECK_FAILING)
Severity: Major
Found in plugins/elasticsearch/check-es-indexstatus.py and 5 other locations - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 31..34
plugins/elasticsearch/check-es-indexstatus.py on lines 53..56
plugins/elasticsearch/check-es-threadpool.py on lines 25..28
plugins/elasticsearch/check-es-threadpool.py on lines 32..35
plugins/elasticsearch/check-es-threadpool.py on lines 51..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    if r1.status >= 300:  # pylint: disable=E1101
        msg = "check_es_threadpool: host=%s received non-2xx resp=%s"%(myname, r1.status)
        print msg
        sys.exit(CHECK_FAILING)
Severity: Major
Found in plugins/elasticsearch/check-es-threadpool.py and 5 other locations - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 31..34
plugins/elasticsearch/check-es-indexstatus.py on lines 38..41
plugins/elasticsearch/check-es-indexstatus.py on lines 53..56
plugins/elasticsearch/check-es-threadpool.py on lines 32..35
plugins/elasticsearch/check-es-threadpool.py on lines 51..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    if r1.status >= 300:  # pylint: disable=E1101
        msg = "check_es_threadpool: host=%s received non-2xx resp=%s"%(myname, r1.status)
        print msg
        sys.exit(CHECK_FAILING)
Severity: Major
Found in plugins/elasticsearch/check-es-threadpool.py and 5 other locations - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 31..34
plugins/elasticsearch/check-es-indexstatus.py on lines 38..41
plugins/elasticsearch/check-es-indexstatus.py on lines 53..56
plugins/elasticsearch/check-es-threadpool.py on lines 25..28
plugins/elasticsearch/check-es-threadpool.py on lines 51..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    if r1.status >= 300:  # pylint: disable=E1101
        msg = "check_es_indexstatus: host=%s received non-2xx resp=%s"%(myname, r1.status)
        print msg
        sys.exit(CHECK_FAILING)
Severity: Major
Found in plugins/elasticsearch/check-es-indexstatus.py and 5 other locations - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 31..34
plugins/elasticsearch/check-es-indexstatus.py on lines 38..41
plugins/elasticsearch/check-es-threadpool.py on lines 25..28
plugins/elasticsearch/check-es-threadpool.py on lines 32..35
plugins/elasticsearch/check-es-threadpool.py on lines 51..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        if r1.status >= 300:  # pylint: disable=E1101
            msg = "check_es_threadpool: host=%s received non-2xx resp=%s"%(myname, r1.status)
            print msg
            sys.exit(CHECK_FAILING)
Severity: Major
Found in plugins/elasticsearch/check-es-threadpool.py and 5 other locations - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 31..34
plugins/elasticsearch/check-es-indexstatus.py on lines 38..41
plugins/elasticsearch/check-es-indexstatus.py on lines 53..56
plugins/elasticsearch/check-es-threadpool.py on lines 25..28
plugins/elasticsearch/check-es-threadpool.py on lines 32..35

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    if r1.status >= 300:  # pylint: disable=E1101
        msg = "check_es_indexstatus: host=%s received non-2xx resp=%s"%(myname, r1.status)
        print msg
        sys.exit(CHECK_FAILING)
Severity: Major
Found in plugins/elasticsearch/check-es-indexstatus.py and 5 other locations - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 38..41
plugins/elasticsearch/check-es-indexstatus.py on lines 53..56
plugins/elasticsearch/check-es-threadpool.py on lines 25..28
plugins/elasticsearch/check-es-threadpool.py on lines 32..35
plugins/elasticsearch/check-es-threadpool.py on lines 51..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 40.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def api_request(method, path, &blk) # rubocop:disable all
    http = Net::HTTP.new(settings['api']['host'], settings['api']['port'])
    req = net_http_req_class(method).new(path)
    if settings['api']['user'] && settings['api']['password']
      req.basic_auth(settings['api']['user'], settings['api']['password'])
Severity: Major
Found in plugins/luts/check-lut-pub-info.rb and 1 other location - About 1 hr to fix
plugins/other/graceful-shutdown-check.rb on lines 50..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  def api_request(method, path, &blk) # rubocop:disable all
    http = Net::HTTP.new(settings['api']['host'], settings['api']['port'])
    req = net_http_req_class(method).new(path)
    if settings['api']['user'] && settings['api']['password']
      req.basic_auth(settings['api']['user'], settings['api']['password'])
Severity: Major
Found in plugins/other/graceful-shutdown-check.rb and 1 other location - About 1 hr to fix
plugins/luts/check-lut-pub-info.rb on lines 28..35

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        dt = datetime.datetime(year=now.year, month=now.month, day=now.day) - datetime.timedelta(days=i)
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-index.py and 1 other location - About 1 hr to fix
plugins/elasticsearch/check-es-tribe-node.py on lines 82..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 39.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        dt = datetime.datetime(year=now.year, month=now.month, day=now.day) - datetime.timedelta(days=i)
Severity: Major
Found in plugins/elasticsearch/check-es-tribe-node.py and 1 other location - About 1 hr to fix
plugins/elasticsearch/check-es-tribe-index.py on lines 49..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 39.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        elif respjson["indices"][index]["status"] == "red":
            if twodays_str in index :
                continue
            msg = "check_es_indexstatus: host=%s index=%s status=RED"%(myname, index)
            print msg
Severity: Major
Found in plugins/elasticsearch/check-es-indexstatus.py and 1 other location - About 1 hr to fix
plugins/elasticsearch/check-es-indexstatus.py on lines 62..67

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 38.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language