Sign upLogin

zazoomauro/node-dependency-injection

View on GitHub
Star

Showing 34 of 36 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  switch (path.extname(dir).split('.').pop()) {
    case JsAdapter.FORMAT:
      loader = new JsFileLoader(container)
      break
    case JsonAdapter.FORMAT:
Severity: Major
Found in bin/ndi-container:service.js and 1 other location - About 2 hrs to fix
bin/ndi-config:check.js on lines 17..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  switch (path.extname(dir).split('.').pop()) {
    case JsAdapter.FORMAT:
      loader = new JsFileLoader(container)
      break
    case JsonAdapter.FORMAT:
Severity: Major
Found in bin/ndi-config:check.js and 1 other location - About 2 hrs to fix
bin/ndi-container:service.js on lines 19..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class DefinitionNotFoundException extends Error {
  /**
   * @param {string} id
   */
  constructor (id) {
Severity: Major
Found in lib/Exception/DefinitionNotFoundException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class WrongCompilerPassTypeException extends Error {
  /**
   * @param {string} type
   */
  constructor (type) {
Severity: Major
Found in lib/Exception/WrongCompilerPassTypeException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class LoadMethodNotFoundException extends Error {
  /**
   * @param {string} extension
   */
  constructor (extension) {
Severity: Major
Found in lib/Exception/LoadMethodNotFoundException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class ConfigurationFileNotFoundException extends Error {
  /**
   * @param {string} path
   */
  constructor (path) {
Severity: Major
Found in lib/Exception/ConfigurationFileNotFoundException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class PrivateServiceException extends Error {
  /**
   * @param {string} id
   */
  constructor (id) {
Severity: Major
Found in lib/Exception/PrivateServiceException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class ProcessMethodNotFoundException extends Error {
  /**
   * @param {string} compilerPass
   */
  constructor (compilerPass) {
Severity: Major
Found in lib/Exception/ProcessMethodNotFoundException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class MethodCallNotFoundException extends Error {
  /**
   * @param {string} method
   */
  constructor (method) {
Severity: Major
Found in lib/Exception/MethodCallNotFoundException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class ServiceFileNotFoundException extends Error {
  /**
   * @param {string} fileName
   */
  constructor (fileName) {
Severity: Major
Found in lib/Exception/ServiceFileNotFoundException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class AbstractServiceException extends Error {
  /**
   * @param {string} id
   */
  constructor (id) {
Severity: Major
Found in lib/Exception/AbstractServiceException.js and 10 other locations - About 1 hr to fix
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class NotAbstractServiceException extends Error {
  /**
   * @param {string} id
   */
  constructor (id) {
Severity: Major
Found in lib/Exception/NotAbstractServiceException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotLoadedException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 11 locations. Consider refactoring.
Open

export default class ServiceFileNotLoadedException extends Error {
  /**
   * @param {string} fileName
   */
  constructor (reason) {
Severity: Major
Found in lib/Exception/ServiceFileNotLoadedException.js and 10 other locations - About 1 hr to fix
lib/Exception/AbstractServiceException.js on lines 1..10
lib/Exception/ConfigurationFileNotFoundException.js on lines 1..10
lib/Exception/DefinitionNotFoundException.js on lines 1..10
lib/Exception/LoadMethodNotFoundException.js on lines 1..10
lib/Exception/MethodCallNotFoundException.js on lines 1..10
lib/Exception/NotAbstractServiceException.js on lines 1..10
lib/Exception/PrivateServiceException.js on lines 1..10
lib/Exception/ProcessMethodNotFoundException.js on lines 1..10
lib/Exception/ServiceFileNotFoundException.js on lines 1..10
lib/Exception/WrongCompilerPassTypeException.js on lines 1..10

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 66.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export default class ServiceFileNotValidExtension extends Error {
  constructor (path) {
    super(`Service file not valid extension: ${path}`)
    this.name = 'ServiceFileNotValidExtension'
    this.stack = (new Error()).stack
Severity: Major
Found in lib/Exception/ServiceFileNotValidExtension.js and 1 other location - About 1 hr to fix
lib/Exception/ServiceFileNotAbsolute.js on lines 1..7

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export default class ServiceFileNotAbsolute extends Error {
  constructor (path) {
    super(`Service file not absolute: ${path}`)
    this.name = 'ServiceFileNotAbsolute'
    this.stack = (new Error()).stack
Severity: Major
Found in lib/Exception/ServiceFileNotAbsolute.js and 1 other location - About 1 hr to fix
lib/Exception/ServiceFileNotValidExtension.js on lines 1..7

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export default class JsonDumper extends Dumper {
  async dump () {
    const dataContent = JSON.stringify(this._content)
    await fs.writeFile(
      this._serviceFile,
Severity: Major
Found in lib/Dump/JsonDumper.js and 1 other location - About 1 hr to fix
lib/Dump/YamlDumper.js on lines 5..14

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export default class YamlDumper extends Dumper {
  async dump () {
    const dataContent = yaml.dump(this._content)
    await fs.writeFile(
      this._serviceFile,
Severity: Major
Found in lib/Dump/YamlDumper.js and 1 other location - About 1 hr to fix
lib/Dump/JsonDumper.js on lines 4..13

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 62.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

if (!process.argv.slice(2).length) {
  program.outputHelp((helpText) => {
    return chalk.bold.red(helpText)
  })
}
Severity: Major
Found in bin/ndi-container:service.js and 2 other locations - About 1 hr to fix
bin/ndi-config:check.js on lines 40..44
bin/ndi-config:create.js on lines 41..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

if (!process.argv.slice(2).length) {
  program.outputHelp((helpText) => {
    return chalk.bold.red(helpText)
  })
}
Severity: Major
Found in bin/ndi-config:create.js and 2 other locations - About 1 hr to fix
bin/ndi-config:check.js on lines 40..44
bin/ndi-container:service.js on lines 112..116

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

if (!process.argv.slice(2).length) {
  program.outputHelp((helpText) => {
    return chalk.bold.red(helpText)
  })
}
Severity: Major
Found in bin/ndi-config:check.js and 2 other locations - About 1 hr to fix
bin/ndi-config:create.js on lines 41..45
bin/ndi-container:service.js on lines 112..116

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language