Showing 346 of 346 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
def update
@onboarding_message = OnboardingMessage.find(params[:id])
if @onboarding_message.update(onboarding_message_params)
flash[:notice] = I18n.t(
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 33.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Loofah 2.0.3 is vulnerable (CVE-2018-8048). Upgrade to 2.1.2 Open
loofah (2.0.3)
- Read upRead up
- Exclude checks
Potentially dangerous key allowed for mass assignment Open
params.require(:user).permit(:admin)
- Read upRead up
- Exclude checks
Mass assignment is a feature of Rails which allows an application to create a record from the values of a hash.
Example:
User.new(params[:user])
Unfortunately, if there is a user field called admin
which controls administrator access, now any user can make themselves an administrator.
attr_accessible
and attr_protected
can be used to limit mass assignment. However, Brakeman will warn unless attr_accessible
is used, or mass assignment is completely disabled.
There are two different mass assignment warnings which can arise. The first is when mass assignment actually occurs, such as the example above. This results in a warning like
Unprotected mass assignment near line 61: User.new(params[:user])
The other warning is raised whenever a model is found which does not use attr_accessible
. This produces generic warnings like
Mass assignment is not restricted using attr_accessible
with a list of affected models.
In Rails 3.1 and newer, mass assignment can easily be disabled:
config.active_record.whitelist_attributes = true
Unfortunately, it can also easily be bypassed:
User.new(params[:user], :without_protection => true)
Brakeman will warn on uses of without_protection
.
rails-html-sanitizer 1.0.3 is vulnerable (CVE-2018-3741). Upgrade to 1.0.4 Open
rails-html-sanitizer (1.0.3)
- Read upRead up
- Exclude checks
Similar blocks of code found in 2 locations. Consider refactoring. Open
def create
@quarterly_message = QuarterlyMessage.new(quarterly_message_params)
if @quarterly_message.save
flash[:notice] = I18n.t(
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 30.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def create
@onboarding_message = OnboardingMessage.new(onboarding_message_params)
if @onboarding_message.save
flash[:notice] = I18n.t(
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 30.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Redundant self
detected. Open
results = self.all.where("slack_username like ?", "%#{params[:slack_username]}%")
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Prefer double-quoted strings unless you need single quotes to avoid extra backslashes for escaping. Open
message: I18n.t('employees.errors.slack_username_format'),
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer double-quoted strings unless you need single quotes to avoid extra backslashes for escaping. Open
class_name = current_page?(link_path) ? 'current' : nil
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer double-quoted strings unless you need single quotes to avoid extra backslashes for escaping. Open
flash[:notice] = I18n.t('controllers.employees_controller.notices.create', slack_username: @employee.slack_username)
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer double-quoted strings unless you need single quotes to avoid extra backslashes for escaping. Open
flash[:error] = I18n.t('controllers.test_messages_controller.errors.create.not_up_to_date')
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer double-quoted strings unless you need single quotes to avoid extra backslashes for escaping. Open
require 'business_time'
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Line is too long. [103/80] Open
# This file should contain all the record creation needed to seed the database with its default values.
- Exclude checks
Use %i
or %I
for an array of symbols. Open
add_index :taggings, [:taggable_id, :taggable_type, :context]
- Read upRead up
- Exclude checks
This cop can check for array literals made up of symbols that are not using the %i() syntax.
Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.
Configuration option: MinSize
If set, arrays with fewer elements than this value will not trigger the
cop. For example, a MinSize of
3` will not enforce a style on an array
of 2 or fewer elements.
Example: EnforcedStyle: percent (default)
# good
%i[foo bar baz]
# bad
[:foo, :bar, :baz]
Example: EnforcedStyle: brackets
# good
[:foo, :bar, :baz]
# bad
%i[foo bar baz]
Prefer double-quoted strings unless you need single quotes to avoid extra backslashes for escaping. Open
t.string :error_message, null: false, default: ''
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Use %i
or %I
for an array of symbols. Open
[:employee_id, :message_id, :message_type],
- Read upRead up
- Exclude checks
This cop can check for array literals made up of symbols that are not using the %i() syntax.
Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.
Configuration option: MinSize
If set, arrays with fewer elements than this value will not trigger the
cop. For example, a MinSize of
3` will not enforce a style on an array
of 2 or fewer elements.
Example: EnforcedStyle: percent (default)
# good
%i[foo bar baz]
# bad
[:foo, :bar, :baz]
Example: EnforcedStyle: brackets
# good
[:foo, :bar, :baz]
# bad
%i[foo bar baz]
Use %i
or %I
for an array of symbols. Open
resources :onboarding_messages, only: [
:new,
:create,
:index,
:edit,
- Read upRead up
- Exclude checks
This cop can check for array literals made up of symbols that are not using the %i() syntax.
Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.
Configuration option: MinSize
If set, arrays with fewer elements than this value will not trigger the
cop. For example, a MinSize of
3` will not enforce a style on an array
of 2 or fewer elements.
Example: EnforcedStyle: percent (default)
# good
%i[foo bar baz]
# bad
[:foo, :bar, :baz]
Example: EnforcedStyle: brackets
# good
[:foo, :bar, :baz]
# bad
%i[foo bar baz]
Use safe navigation (&.
) instead of checking if an object exists before calling the method. Open
if @employees
@employees.each do |e|
new_results = where(employee_id: e.id)
results = results.union(new_results)
end
- Read upRead up
- Exclude checks
This cop transforms usages of a method call safeguarded by a non nil
check for the variable whose method is being called to
safe navigation (&.
).
Configuration option: ConvertCodeThatCanStartToReturnNil
The default for this is false
. When configured to true
, this will
check for code in the format !foo.nil? && foo.bar
. As it is written,
the return of this code is limited to false
and whatever the return
of the method is. If this is converted to safe navigation,
foo&.bar
can start returning nil
as well as what the method
returns.
Example:
# bad
foo.bar if foo
foo.bar(param1, param2) if foo
foo.bar { |e| e.something } if foo
foo.bar(param) { |e| e.something } if foo
foo.bar if !foo.nil?
foo.bar unless !foo
foo.bar unless foo.nil?
foo && foo.bar
foo && foo.bar(param1, param2)
foo && foo.bar { |e| e.something }
foo && foo.bar(param) { |e| e.something }
# good
foo&.bar
foo&.bar(param1, param2)
foo&.bar { |e| e.something }
foo&.bar(param) { |e| e.something }
foo.nil? || foo.bar
!foo || foo.bar
# Methods that `nil` will `respond_to?` should not be converted to
# use safe navigation
foo.to_i if foo
Line is too long. [118/80] Open
sent_local_time_zone = sent_scheduled_message.sent_at.in_time_zone(sent_scheduled_message.employee.time_zone).zone
- Exclude checks
Use %i
or %I
for an array of symbols. Open
before_action :current_user_admin, only: [:new, :create, :edit, :update]
- Read upRead up
- Exclude checks
This cop can check for array literals made up of symbols that are not using the %i() syntax.
Alternatively, it checks for symbol arrays using the %i() syntax on projects which do not want to use that syntax.
Configuration option: MinSize
If set, arrays with fewer elements than this value will not trigger the
cop. For example, a MinSize of
3` will not enforce a style on an array
of 2 or fewer elements.
Example: EnforcedStyle: percent (default)
# good
%i[foo bar baz]
# bad
[:foo, :bar, :baz]
Example: EnforcedStyle: brackets
# good
[:foo, :bar, :baz]
# bad
%i[foo bar baz]