Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Control Parameter is a special case of Control Couple

Example

A simple example would be the "quoted" parameter in the following method:

def write(quoted)
  if quoted
    write_quoted @value
  else
    write_unquoted @value
  end
end

Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".

Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.

Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.

Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.

Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.

Example

Running Reek on:

class Warehouse
  def sale_price(item)
    (item.price - item.rebate) * @vat
  end
end

would report:

Warehouse#total_price refers to item more than self (FeatureEnvy)

since this:

(item.price - item.rebate)

belongs to the Item class, not the Warehouse.

A Nested Iterator occurs when a block contains another block.

Example

Given

class Duck
  class << self
    def duck_names
      %i!tick trick track!.each do |surname|
        %i!duck!.each do |last_name|
          puts "full name is #{surname} #{last_name}"
        end
      end
    end
  end
end

Reek would report the following warning:

test.rb -- 1 warning:
  [5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)

Boolean Parameter is a special case of Control Couple, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.

Example

Given

class Dummy
  def hit_the_switch(switch = true)
    if switch
      puts 'Hitting the switch'
      # do other things...
    else
      puts 'Not hitting the switch'
      # do other things...
    end
  end
end

Reek would emit the following warning:

test.rb -- 3 warnings:
  [1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
  [2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)

Note that both smells are reported, Boolean Parameter and Control Parameter.

Getting rid of the smell

This is highly dependent on your exact architecture, but looking at the example above what you could do is:

• Move everything in the if branch into a separate method
• Move everything in the else branch into a separate method
• Get rid of the hit_the_switch method alltogether
• Make the decision what method to call in the initial caller of hit_the_switch

Control Parameter is a special case of Control Couple

Example

A simple example would be the "quoted" parameter in the following method:

def write(quoted)
  if quoted
    write_quoted @value
  else
    write_unquoted @value
  end
end

Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".

Control Parameter is a special case of Control Couple

Example

A simple example would be the "quoted" parameter in the following method:

def write(quoted)
  if quoted
    write_quoted @value
  else
    write_unquoted @value
  end
end

Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".

Control Parameter is a special case of Control Couple

Example

A simple example would be the "quoted" parameter in the following method:

def write(quoted)
  if quoted
    write_quoted @value
  else
    write_unquoted @value
  end
end

Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.

Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.

Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.

Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.

Example

Running Reek on:

class Warehouse
  def sale_price(item)
    (item.price - item.rebate) * @vat
  end
end

would report:

Warehouse#total_price refers to item more than self (FeatureEnvy)

since this:

(item.price - item.rebate)

belongs to the Item class, not the Warehouse.

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Reek reports a Manual Dispatch smell if it finds source code that manually checks whether an object responds to a method before that method is called. Manual dispatch is a type of Simulated Polymorphism which leads to code that is harder to reason about, debug, and refactor.

Example

class MyManualDispatcher
  attr_reader :foo

  def initialize(foo)
    @foo = foo
  end

  def call
    foo.bar if foo.respond_to?(:bar)
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [9]: MyManualDispatcher manually dispatches method call (ManualDispatch)

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

A NilCheck is a type check. Failures of NilCheck violate the "tell, don't ask" principle.

Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.

Example

Given

class Klass
  def nil_checker(argument)
    if argument.nil?
      puts "argument isn't nil!"
    end
  end
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [3]:Klass#nil_checker performs a nil-check. (NilCheck)

Unused Parameter refers to methods with parameters that are unused in scope of the method.

Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.

Example

Given:

class Klass
  def unused_parameters(x,y,z)
    puts x,y # but not z
  end
end

Reek would emit the following warning:

[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)

An Uncommunicative Parameter Name is a parameter name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.

An Uncommunicative Variable Name is a variable name that doesn't communicate its intent well enough.

Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.