Method accepted
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def accepted(contract)
return unless should_notify?(contract)
return unless contract.user_account
return unless contract.plan && contract.plan.approval_required?
return if contract.user_account.admins.empty?
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
MessageObserver tests 'contract' at least 3 times Open
event = case contract
when Cinstance
Applications::ApplicationCreatedEvent.create(contract, User.current)
when ServiceContract
ServiceContracts::ServiceContractCreatedEvent.create(contract, User.current)
- Read upRead up
- Exclude checks
Repeated Conditional
is a special case of Simulated Polymorphism
. Basically it means you are checking the same value throughout a single class and take decisions based on this.
Example
Given
class RepeatedConditionals
attr_accessor :switch
def repeat_1
puts "Repeat 1!" if switch
end
def repeat_2
puts "Repeat 2!" if switch
end
def repeat_3
puts "Repeat 3!" if switch
end
end
Reek would emit the following warning:
test.rb -- 4 warnings:
[5, 9, 13]:RepeatedConditionals tests switch at least 3 times (RepeatedConditional)
If you get this warning then you are probably not using the right abstraction or even more probable, missing an additional abstraction.
MessageObserver tests 'should_notify?(contract)' at least 6 times Open
return unless should_notify?(contract)
return if contract.user_account.nil?
return if contract.user_account.admins.empty?
contract.messenger.new_contract(contract).deliver
- Read upRead up
- Exclude checks
Repeated Conditional
is a special case of Simulated Polymorphism
. Basically it means you are checking the same value throughout a single class and take decisions based on this.
Example
Given
class RepeatedConditionals
attr_accessor :switch
def repeat_1
puts "Repeat 1!" if switch
end
def repeat_2
puts "Repeat 2!" if switch
end
def repeat_3
puts "Repeat 3!" if switch
end
end
Reek would emit the following warning:
test.rb -- 4 warnings:
[5, 9, 13]:RepeatedConditionals tests switch at least 3 times (RepeatedConditional)
If you get this warning then you are probably not using the right abstraction or even more probable, missing an additional abstraction.
MessageObserver tests 'contract.user_account.nil?' at least 3 times Open
return if contract.user_account.nil?
return if contract.user_account.admins.empty?
contract.messenger.new_contract(contract).deliver
end
- Read upRead up
- Exclude checks
Repeated Conditional
is a special case of Simulated Polymorphism
. Basically it means you are checking the same value throughout a single class and take decisions based on this.
Example
Given
class RepeatedConditionals
attr_accessor :switch
def repeat_1
puts "Repeat 1!" if switch
end
def repeat_2
puts "Repeat 2!" if switch
end
def repeat_3
puts "Repeat 3!" if switch
end
end
Reek would emit the following warning:
test.rb -- 4 warnings:
[5, 9, 13]:RepeatedConditionals tests switch at least 3 times (RepeatedConditional)
If you get this warning then you are probably not using the right abstraction or even more probable, missing an additional abstraction.
MessageObserver tests 'contract.user_account.admins.empty?' at least 3 times Open
return if contract.user_account.admins.empty?
contract.messenger.new_contract(contract).deliver
end
- Read upRead up
- Exclude checks
Repeated Conditional
is a special case of Simulated Polymorphism
. Basically it means you are checking the same value throughout a single class and take decisions based on this.
Example
Given
class RepeatedConditionals
attr_accessor :switch
def repeat_1
puts "Repeat 1!" if switch
end
def repeat_2
puts "Repeat 2!" if switch
end
def repeat_3
puts "Repeat 3!" if switch
end
end
Reek would emit the following warning:
test.rb -- 4 warnings:
[5, 9, 13]:RepeatedConditionals tests switch at least 3 times (RepeatedConditional)
If you get this warning then you are probably not using the right abstraction or even more probable, missing an additional abstraction.
Method after_commit_on_destroy
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
def after_commit_on_destroy(contract)
return unless should_notify?(contract)
return if contract.user_account.nil?
# Do not send if there is no-one to send the message to.
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
MessageObserver#accepted calls 'contract.plan' 2 times Open
return unless contract.plan && contract.plan.approval_required?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
MessageObserver#after_create calls 'User.current' 2 times Open
Applications::ApplicationCreatedEvent.create(contract, User.current)
when ServiceContract
ServiceContracts::ServiceContractCreatedEvent.create(contract, User.current)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
MessageObserver#rejected calls 'contract.user_account' 2 times Open
return if contract.user_account.nil?
return if contract.user_account.admins.empty?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
MessageObserver#after_commit_on_destroy calls 'contract.provider_account' 2 times Open
return unless contract.provider_account
return if contract.provider_account.admins.empty?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
MessageObserver#accepted calls 'contract.user_account' 2 times Open
return unless contract.user_account
return unless contract.plan && contract.plan.approval_required?
return if contract.user_account.admins.empty?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
MessageObserver#after_commit_on_create calls 'contract.user_account' 2 times Open
return if contract.user_account.nil?
return if contract.user_account.admins.empty?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Avoid too many return
statements within this method. Open
return if contract.pending?
MessageObserver#rejected performs a nil-check Open
return if contract.user_account.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
MessageObserver#after_commit_on_destroy performs a nil-check Open
return if contract.user_account.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
MessageObserver has missing safe method 'plan_changed_publish_event!' Open
def plan_changed_publish_event!(contract)
- Read upRead up
- Exclude checks
A candidate method for the Missing Safe Method
smell are methods whose names end with an exclamation mark.
An exclamation mark in method names means (the explanation below is taken from here ):
The ! in method names that end with ! means, “This method is dangerous”—or, more precisely, this method is the “dangerous” version of an otherwise equivalent method, with the same name minus the !. “Danger” is relative; the ! doesn’t mean anything at all unless the method name it’s in corresponds to a similar but bang-less method name. So, for example, gsub! is the dangerous version of gsub. exit! is the dangerous version of exit. flatten! is the dangerous version of flatten. And so forth.
Such a method is called Missing Safe Method
if and only if her non-bang version does not exist and this method is reported as a smell.
Example
Given
class C
def foo; end
def foo!; end
def bar!; end
end
Reek would report bar!
as Missing Safe Method
smell but not foo!
.
Reek reports this smell only in a class context, not in a module context in order to allow perfectly legit code like this:
class Parent
def foo; end
end
module Dangerous
def foo!; end
end
class Son < Parent
include Dangerous
end
class Daughter < Parent
end
In this example, Reek would not report the Missing Safe Method
smell for the method foo
of the Dangerous
module.
MessageObserver#after_commit_on_create performs a nil-check Open
return if contract.user_account.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)