Showing 5,267 of 5,597 total issues
Liquid::Docs::DSL::Base#deprecated has unused parameter 'message' Open
def deprecated(message)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
CMS::Handler::Base#convert has unused parameter 'markup' Open
def convert(markup)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Forms::Application::Create#object_param_name has unused parameter 'model' Open
def object_param_name(model)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Forms::Application::Update#object_param_name has unused parameter 'model' Open
def object_param_name(model)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Drops::Deprecated#allowed_name? has unused parameter 'name' Open
def allowed_name?(name)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Drops::Buyer#initialize has unused parameter 'options' Open
def initialize(buyer_account, service, options = {})
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Template::Resolver#_find_all has unused parameter 'locals' Open
def _find_all(name, prefix, partial, details, key = nil, locals = [])
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Gitlab::Testing::RequestBlockerMiddleware#block_request has unused parameter 'env' Open
def block_request(env)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Template::Resolver#_find_all has unused parameter 'details' Open
def _find_all(name, prefix, partial, details, key = nil, locals = [])
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Liquid::Template::Resolver#_find_all has unused parameter 'key' Open
def _find_all(name, prefix, partial, details, key = nil, locals = [])
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
AuditHacks#before_background_callbacks has unused parameter 'args' Open
def before_background_callbacks(*args)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
ActiveSupport::TimeWithZone#as_json has unused parameter 'options' Open
def as_json(options = nil)
- Read upRead up
- Exclude checks
Unused Parameter
refers to methods with parameters that are unused in scope of the method.
Having unused parameters in a method is code smell because leaving dead code in a method can never improve the method and it makes the code confusing to read.
Example
Given:
class Klass
def unused_parameters(x,y,z)
puts x,y # but not z
end
end
Reek would emit the following warning:
[2]:Klass#unused_parameters has unused parameter 'z' (UnusedParameters)
Similar blocks of code found in 2 locations. Consider refactoring. Open
create_table "moderatorships", charset: "utf8mb3", collation: "utf8mb3_bin", force: :cascade do |t|
t.bigint "forum_id"
t.bigint "user_id"
t.datetime "created_at"
t.datetime "updated_at"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
create_table "user_topics", charset: "utf8mb3", collation: "utf8mb3_bin", force: :cascade do |t|
t.bigint "user_id"
t.bigint "topic_id"
t.datetime "created_at"
t.datetime "updated_at"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 27.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 7 locations. Consider refactoring. Open
create_table "taggings", :force => true do |t|
t.integer "tag_id"
t.integer "taggable_id"
t.string "taggable_type"
t.integer "taggable_version"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 7 locations. Consider refactoring. Open
create_table "application_tokens", :force => true do |t|
t.integer "application_id"
t.string "token"
t.string "state"
t.datetime "created_at"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 7 locations. Consider refactoring. Open
create_table "permissions", :force => true do |t|
t.string "name"
t.string "full_name"
t.string "description"
t.string "for_module"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
create_table "monitorships", :force => true do |t|
t.integer "user_id"
t.integer "topic_id"
t.datetime "created_at"
t.datetime "updated_at"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
create_table "monitorships", :force => true do |t|
t.integer "user_id"
t.integer "topic_id"
t.datetime "created_at"
t.datetime "updated_at"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 7 locations. Consider refactoring. Open
create_table "page_route_options", :force => true do |t|
t.integer "page_route_id"
t.string "type"
t.string "name"
t.string "value"
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76