Showing 5,269 of 5,606 total issues
DeveloperPortal::Admin::ApplicationsController#create has approx 8 statements Open
def create
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Liquid::Assigns#assign_drops has approx 13 statements Open
def assign_drops drops
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Liquid::Drops::Account has at least 43 methods Open
class Account < Drops::Model
- Read upRead up
- Exclude checks
Too Many Methods
is a special case of LargeClass
.
Example
Given this configuration
TooManyMethods:
max_methods: 3
and this code:
class TooManyMethods
def one; end
def two; end
def three; end
def four; end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:TooManyMethods has at least 4 methods (TooManyMethods)
DeveloperPortal::Admin::Applications::KeysController#new refers to 'format' more than self (maybe move it to another class?) Open
format.html
format.js
- Read upRead up
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
Liquid::Filters::ParamFilter#to_param refers to 'drop' more than self (maybe move it to another class?) Open
if drop.is_a? Liquid::Drops::Plan
"plan_ids[]=#{drop.id}"
elsif drop.is_a? Liquid::Drops::Service
"service_id=#{drop.id}"
elsif drop.respond_to?(:map)
- Read upRead up
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
Liquid::Tags::Base#surround_by_comments has 4 parameters Open
def surround_by_comments(ctx, type, name, content)
- Read upRead up
- Exclude checks
A Long Parameter List
occurs when a method has a lot of parameters.
Example
Given
class Dummy
def long_list(foo,bar,baz,fling,flung)
puts foo,bar,baz,fling,flung
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[2]:Dummy#long_list has 5 parameters (LongParameterList)
A common solution to this problem would be the introduction of parameter objects.
InvitationMailer#invitation has approx 10 statements Open
def invitation(invitation)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Liquid::Drops::BillingAddressField#choices refers to 'country' more than self (maybe move it to another class?) Open
Liquid::Drops::Field::Choice.new(country.name, country.code)
- Read upRead up
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
Liquid::Drops::Field#== is controlled by argument 'other' Open
to_str == other or super
- Read upRead up
- Exclude checks
Control Parameter
is a special case of Control Couple
Example
A simple example would be the "quoted" parameter in the following method:
def write(quoted)
if quoted
write_quoted @value
else
write_unquoted @value
end
end
Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".
DeveloperPortal::Admin::Account::UsersController#update has approx 8 statements Open
def update
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
DeveloperPortal::Admin::ApplicationsController#create refers to 'application' more than self (maybe move it to another class?) Open
application.validate_human_edition!
application.validate_fields!
application.validate_contract_hierarchy!
application.validate_plan_is_unique!
if application.save
- Read upRead up
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
DeveloperPortal::Admin::ServiceContractsController has at least 5 instance variables Open
class DeveloperPortal::Admin::ServiceContractsController < DeveloperPortal::BaseController
- Read upRead up
- Exclude checks
Too Many Instance Variables
is a special case of LargeClass
.
Example
Given this configuration
TooManyInstanceVariables:
max_instance_variables: 3
and this code:
class TooManyInstanceVariables
def initialize
@arg_1 = :dummy
@arg_2 = :dummy
@arg_3 = :dummy
@arg_4 = :dummy
end
end
Reek would emit the following warning:
test.rb -- 5 warnings:
[1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)
DeveloperPortal::CMS::NewContentController#show has approx 9 statements Open
def show
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
DeveloperPortal::SignupController has at least 6 instance variables Open
class SignupController < DeveloperPortal::BaseController
- Read upRead up
- Exclude checks
Too Many Instance Variables
is a special case of LargeClass
.
Example
Given this configuration
TooManyInstanceVariables:
max_instance_variables: 3
and this code:
class TooManyInstanceVariables
def initialize
@arg_1 = :dummy
@arg_2 = :dummy
@arg_3 = :dummy
@arg_4 = :dummy
end
end
Reek would emit the following warning:
test.rb -- 5 warnings:
[1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)
Liquid::Filters::RailsHelpers#button has 4 parameters Open
def button(title, url, method, options={})
- Read upRead up
- Exclude checks
A Long Parameter List
occurs when a method has a lot of parameters.
Example
Given
class Dummy
def long_list(foo,bar,baz,fling,flung)
puts foo,bar,baz,fling,flung
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[2]:Dummy#long_list has 5 parameters (LongParameterList)
A common solution to this problem would be the introduction of parameter objects.
Liquid::Filters::RailsHelpers has 7 constants Open
module RailsHelpers # rubocop:disable Metrics/ModuleLength
- Read upRead up
- Exclude checks
Too Many Constants
is a special case of LargeClass
.
Example
Given this configuration
TooManyConstants:
max_constants: 3
and this code:
class TooManyConstants
CONST_1 = :dummy
CONST_2 = :dummy
CONST_3 = :dummy
CONST_4 = :dummy
end
Reek would emit the following warning:
test.rb -- 1 warnings:
[1]:TooManyConstants has 4 constants (TooManyConstants)
Liquid::Drops::CountryField#choices refers to 'c' more than self (maybe move it to another class?) Open
@choices = ::Country.all.map { |c| Choice.new(c.name, c.id) }
- Read upRead up
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
Liquid::Drops::Service has at least 21 methods Open
class Service < Drops::Model
- Read upRead up
- Exclude checks
Too Many Methods
is a special case of LargeClass
.
Example
Given this configuration
TooManyMethods:
max_methods: 3
and this code:
class TooManyMethods
def one; end
def two; end
def three; end
def four; end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:TooManyMethods has at least 4 methods (TooManyMethods)
Liquid::Tags::Email#unquote is controlled by argument 'content' Open
content =~ QuotedFragmentContent and $1
- Read upRead up
- Exclude checks
Control Parameter
is a special case of Control Couple
Example
A simple example would be the "quoted" parameter in the following method:
def write(quoted)
if quoted
write_quoted @value
else
write_unquoted @value
end
end
Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".
Liquid::Template::FallbackResolver#_find_all has 6 parameters Open
def _find_all(name, prefix, partial, details, key = nil, locals = [])
- Read upRead up
- Exclude checks
A Long Parameter List
occurs when a method has a lot of parameters.
Example
Given
class Dummy
def long_list(foo,bar,baz,fling,flung)
puts foo,bar,baz,fling,flung
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[2]:Dummy#long_list has 5 parameters (LongParameterList)
A common solution to this problem would be the introduction of parameter objects.