Showing 5,269 of 5,606 total issues
Message assumes too much for instance variable '@receivers' Open
class Message < ApplicationRecord
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
PaymentGateway#self.bogus_enabled? calls 'Rails.env' 2 times Open
Rails.env.development? or Rails.env.test?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Plan#copy calls 'attrs[:original]' 2 times Open
custom.original = attrs[:original] unless attrs[:original].nil?
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Policy#validate_same_version calls 'version.to_s' 2 times Open
if version.to_s == BUILT_IN_NAME
errors.add :version, :builtin
elsif version.to_s != schema&.dig('version').to_s
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
ApplicationHelper#topic_title_link calls 'forum_topic_path(@forum, topic)' 2 times Open
link_to(h($2.strip), forum_topic_path(@forum, topic), options)
else
link_to(h(topic.title), forum_topic_path(@forum, topic), options)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Finance::BillingStrategy#bill_expired_trials calls 'contract.plan' 3 times Open
plan_type = contract.plan.class.model_name.human.downcase
info("#{log_prefix(buyer)} for #{plan_type} #{contract.plan.id} (#{contract.plan.name}) - just signed up or trial period expired", buyer)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Finance::BillingStrategy assumes too much for instance variable '@failed_buyers' Open
class Finance::BillingStrategy < ApplicationRecord
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Finance::PostpaidBillingStrategy#daily calls 'log_prefix(buyer)' 2 times Open
Rails.logger.info("#{log_prefix(buyer)} started daily billing and charging at #{now} (postpaid)")
bill_expired_trials(buyer, now)
only_on_days(now, 1) do
bill_variable_costs(buyer, now - 1.month) # bill for costs until end of yesterday (last day of month)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Invoice assumes too much for instance variable '@period' Open
class Invoice < ApplicationRecord
- Read upRead up
- Exclude checks
Classes should not assume that instance variables are set or present outside of the current class definition.
Good:
class Foo
def initialize
@bar = :foo
end
def foo?
@bar == :foo
end
end
Good as well:
class Foo
def foo?
bar == :foo
end
def bar
@bar ||= :foo
end
end
Bad:
class Foo
def go_foo!
@bar = :foo
end
def foo?
@bar == :foo
end
end
Example
Running Reek on:
class Dummy
def test
@ivar
end
end
would report:
[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar
Note that this example would trigger this smell warning as well:
class Parent
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
@omg
end
end
The way to address the smell warning is that you should create an attr_reader
to use @omg
in the subclass and not access @omg
directly like this:
class Parent
attr_reader :omg
def initialize(omg)
@omg = omg
end
end
class Child < Parent
def foo
omg
end
end
Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.
If you don't want to expose those methods as public API just make them private like this:
class Parent
def initialize(omg)
@omg = omg
end
private
attr_reader :omg
end
class Child < Parent
def foo
omg
end
end
Current Support in Reek
An instance variable must:
- be set in the constructor
- or be accessed through a method with lazy initialization / memoization.
If not, Instance Variable Assumption will be reported.
Plan#create_contract_with calls 'params["application_id"]' 2 times Open
contract.application_id = params["application_id"] if params["application_id"]
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
UsageLimit#set_value_default_value calls 'self.value' 2 times Open
self.value = 0 if (self.value.blank? || self.value < 0)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
ApplicationHelper#next_page calls 'collection.current_page' 2 times Open
unless collection.current_page == collection.total_entries || collection.total_entries == 0
"<p style='float:right;'>" + link_to("Next page"[], { :page => collection.current_page.next }.merge(params.reject{|k,v| k=="page"})) + "</p>"
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
ApplicationHelper#tab calls 'options[:of]' 2 times Open
layout = options[:of] ? "#{options[:of].to_s.pluralize}/" : ''
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Buyers::FieldsDefinitionsHelper#fields_definitions_rows calls 'field.name' 2 times Open
if object.field(field.name).present? && field.visible_for?(current_user)
fields << show_if_present(field.name, object).to_s
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
CinstancesHelper#application_friendly_name calls 'cinstance.name' 3 times Open
cinstance.name =~ /(application)/i ? cinstance.name : "#{cinstance.name} application"
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Service#visible_plans_for calls 'buyer_account.bought_plan' 2 times Open
if buyer_account && !results.include?(buyer_account.bought_plan)
results << buyer_account.bought_plan
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
SystemOperation#for calls 'DEFAULTS[ref]' 2 times Open
elsif DEFAULTS[ref]
SystemOperation.create! :ref => ref.to_s, :name => DEFAULTS[ref]
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
User::Invitations#destroy_invitation calls 'account.invitations' 2 times Open
invit = account.invitations.find_by_email(email) || account.invitations.find_by_user_id(id) # || eventually invitation
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
BuyerSearchHelper#search_result calls 'presenter.kind' 2 times Open
"#{ presenter.total_found } #{ (presenter.kind=="all")? "" : h(presenter.kind) } #{ h(presenter.scope) }".gsub(/ /,' ')
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Buyers::CinstancesHelper#link_to_plan_edit calls 'plan.name' 2 times Open
link_to(plan.name, edit_polymorphic_path([:admin, plan]))
else
plan.name
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.