The class InvoiceController has an overall complexity of 55 which is very high. The configured complexity threshold is 50. Open
class InvoiceController extends AbstractAdminController
{
/**
* List of invoices.
*
- Exclude checks
The class InvoiceController has 11 public methods. Consider refactoring InvoiceController to keep number of public methods under 10. Open
class InvoiceController extends AbstractAdminController
{
/**
* List of invoices.
*
- Read upRead up
- Exclude checks
TooManyPublicMethods
Since: 0.1
A class with too many public methods is probably a good suspect for refactoring, in order to reduce its complexity and find a way to have more fine grained objects.
By default it ignores methods starting with 'get' or 'set'.
Example
Source https://phpmd.org/rules/codesize.html#toomanypublicmethods
File InvoiceController.php
has 285 lines of code (exceeds 250 allowed). Consider refactoring. Open
<?php
namespace App\Http\Controllers\Admin;
use App\Countries;
Function generateFilterInvoiceBySelection
has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring. Open
private function generateFilterInvoiceBySelection(InvoiceFilter $selected, User $user): string
{
if ($selected->id) {
return 'WHERE `id` = ' . $selected->id;
}
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method index
has 56 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function index(Request $request): Response
{
$momssats = strval($request->get('momssats'));
if (!$momssats) {
$momssats = null;
Method generateFilterInvoiceBySelection
has 50 lines of code (exceeds 25 allowed). Consider refactoring. Open
private function generateFilterInvoiceBySelection(InvoiceFilter $selected, User $user): string
{
if ($selected->id) {
return 'WHERE `id` = ' . $selected->id;
}
Function invoice
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
public function invoice(Request $request, ?int $id = null): Response
{
$orm = app(OrmService::class);
$invoice = null;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
The method generateFilterInvoiceBySelection() has an NPath complexity of 30720. The configured NPath complexity threshold is 200. Open
private function generateFilterInvoiceBySelection(InvoiceFilter $selected, User $user): string
{
if ($selected->id) {
return 'WHERE `id` = ' . $selected->id;
}
- Read upRead up
- Exclude checks
NPathComplexity
Since: 0.1
The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.
Example
class Foo {
function bar() {
// lots of complicated code
}
}
Source https://phpmd.org/rules/codesize.html#npathcomplexity
The method generateFilterInvoiceBySelection() has a Cyclomatic Complexity of 20. The configured cyclomatic complexity threshold is 10. Open
private function generateFilterInvoiceBySelection(InvoiceFilter $selected, User $user): string
{
if ($selected->id) {
return 'WHERE `id` = ' . $selected->id;
}
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
The class InvoiceController has a coupling between objects value of 15. Consider to reduce the number of dependencies under 13. Open
class InvoiceController extends AbstractAdminController
{
/**
* List of invoices.
*
- Read upRead up
- Exclude checks
CouplingBetweenObjects
Since: 1.1.0
A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability
Example
class Foo {
/**
* @var \foo\bar\X
*/
private $x = null;
/**
* @var \foo\bar\Y
*/
private $y = null;
/**
* @var \foo\bar\Z
*/
private $z = null;
public function setFoo(\Foo $foo) {}
public function setBar(\Bar $bar) {}
public function setBaz(\Baz $baz) {}
/**
* @return \SplObjectStorage
* @throws \OutOfRangeException
* @throws \InvalidArgumentException
* @throws \ErrorException
*/
public function process(\Iterator $it) {}
// ...
}
Source https://phpmd.org/rules/design.html#couplingbetweenobjects
Avoid using static access to class '\App\Countries' in method 'index'. Open
'countries' => Countries::getOrdered(),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Services\ConfigService' in method 'invoice'. Open
'departments' => array_keys(ConfigService::getEmailConfigs()),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Enums\InvoiceAction' in method 'create'. Open
$action = InvoiceAction::from($action);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Countries' in method 'invoice'. Open
'countries' => Countries::getOrdered(),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Enums\InvoiceAction' in method 'update'. Open
$action = InvoiceAction::from($action);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Services\ConfigService' in method 'index'. Open
'departments' => array_keys(ConfigService::getEmailConfigs()),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid unused parameters such as '$request'. Open
public function sendReminder(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}
Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter
Avoid unused parameters such as '$request'. Open
public function pdf(Request $request, int $id): Response
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}
Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter
Avoid unused parameters such as '$request'. Open
public function capturePayment(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}
Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter
Avoid unused parameters such as '$request'. Open
public function annulPayment(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
UnusedFormalParameter
Since: 0.2
Avoid passing parameters to methods or constructors and then not using those parameters.
Example
class Foo
{
private function bar($howdy)
{
// $howdy is not used
}
}
Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter
Similar blocks of code found in 3 locations. Consider refactoring. Open
public function sendReminder(Request $request, int $id): JsonResponse
{
$invoice = app(OrmService::class)->getOne(Invoice::class, $id);
if (!$invoice) {
throw new InvalidInput(_('Invoice not found.'), Response::HTTP_NOT_FOUND);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 108.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
public function annulPayment(Request $request, int $id): JsonResponse
{
$invoice = app(OrmService::class)->getOne(Invoice::class, $id);
if (!$invoice) {
throw new InvalidInput(_('Invoice not found.'), Response::HTTP_NOT_FOUND);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 108.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
public function capturePayment(Request $request, int $id): JsonResponse
{
$invoice = app(OrmService::class)->getOne(Invoice::class, $id);
if (!$invoice) {
throw new InvalidInput(_('Invoice not found.'), Response::HTTP_NOT_FOUND);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 108.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function validate(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $db. Configured minimum length is 3. Open
$db = app(DbService::class);
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function sendReminder(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function capturePayment(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function invoice(Request $request, ?int $id = null): Response
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function pdf(Request $request, int $id): Response
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $db. Configured minimum length is 3. Open
$db = app(DbService::class);
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function clone(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function annulPayment(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
public function update(Request $request, int $id): JsonResponse
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}