Showing 1,243 of 1,244 total issues
MetasmUtils#self.getArg has approx 26 statements Open
def self.getArg(addrori, arg)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
is_linked_func has approx 10 statements Open
def is_linked_func(currFunc, start_address, stop_address)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
checkCall has approx 53 statements Open
def checkCall(strFunc, xrefCall)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
MachocHash#self.calculate_machoc_hash contains iterators nested 3 deep Open
dasm.di_at(bloc[0]).block.list.each do |di|
currFunc += 'c' if di.opcode.name == 'call'
end
refs = bloc[1]
refs = refs.sort
- Read upRead up
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
calculateSizeSubCallTree has 4 parameters Open
def calculateSizeSubCallTree(fromaddr, toaddr, indent, cnt)
- Read upRead up
- Exclude checks
A Long Parameter List
occurs when a method has a lot of parameters.
Example
Given
class Dummy
def long_list(foo,bar,baz,fling,flung)
puts foo,bar,baz,fling,flung
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[2]:Dummy#long_list has 5 parameters (LongParameterList)
A common solution to this problem would be the introduction of parameter objects.
printSubCallTree contains iterators nested 3 deep Open
indent.each do |_id, _iscontinue|
- Read upRead up
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
parse_some_string has approx 8 statements Open
def parse_some_string(addr, str, comment)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
MetasmUtils#self.find_start_of_function has approx 14 statements Open
def self.find_start_of_function(address)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
printSubCallTree has 4 parameters Open
def printSubCallTree(fromaddr, toaddr, indent, cnt)
- Read upRead up
- Exclude checks
A Long Parameter List
occurs when a method has a lot of parameters.
Example
Given
class Dummy
def long_list(foo,bar,baz,fling,flung)
puts foo,bar,baz,fling,flung
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[2]:Dummy#long_list has 5 parameters (LongParameterList)
A common solution to this problem would be the introduction of parameter objects.
calculateSizeSubCallTree has approx 14 statements Open
def calculateSizeSubCallTree(fromaddr, toaddr, indent, cnt)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
MachocHash#self.calculate_machoc_hash contains iterators nested 2 deep Open
@treefunc.each do |b|
- Read upRead up
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
Similar blocks of code found in 3 locations. Consider refactoring. Open
@apiview.app_errorhandler(500)
def api_500_handler(error):
"""
Module wide, returned in case of server error
"""
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 35.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
@apiview.errorhandler(401)
def api_401_handler(error):
"""
module wide error handler, returned when there is an argument problem
"""
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 35.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function ui_search
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def ui_search():
"""
Handle search forms
"""
hform = HashSearchForm()
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function match_by_importhash
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def match_by_importhash(cls, sample):
"""
Match samples by import hash.
"""
if sample.import_hash is None or sample.import_hash == "":
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Avoid deeply nested control flow statements. Open
AddTagFunction(basefunc, 'Net_') unless basefunc.nil?
Avoid deeply nested control flow statements. Open
printCallTree(dasm.normalize(ep), orifunc) if isFuncTreeLink(dasm.normalize(ep), orifunc)
Function api_post_samples
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def api_post_samples():
"""
@description : Insert a new sample in database, launch analysis
@arg: string filename
@arg: binary data : the sample content
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function dispatch_sample_creation
has 6 arguments (exceeds 4 allowed). Consider refactoring. Open
def dispatch_sample_creation(self,
Function create_sample_from_file
has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring. Open
def create_sample_from_file(self, file_data, orig_filename="", user=None,
tlp_level=TLPLevel.TLPWHITE):
"""
Creates a sample from file data. Updates metadata, etc.
"""
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"