Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD030 - Spaces after list markers

Tags: ol, ul, whitespace

Aliases: list-marker-space

Parameters: ulsingle, olsingle, ulmulti, olmulti (number, default 1)

This rule checks for the number of spaces between a list marker (e.g. '-', '*', '+' or '1.') and the text of the list item.

The number of spaces checked for depends on the document style in use, but the default is 1 space after any list marker:

* Foo
* Bar
* Baz

1. Foo
1. Bar
1. Baz

1. Foo
   * Bar
1. Baz

A document style may change the number of spaces after unordered list items and ordered list items independently, as well as based on whether the content of every item in the list consists of a single paragraph, or multiple paragraphs (including sub-lists and code blocks).

For example, the style guide at http://www.cirosantilli.com/markdown-styleguide/#spaces-after-marker specifies that 1 space after the list marker should be used if every item in the list fits within a single paragraph, but to use 2 or 3 spaces (for ordered and unordered lists respectively) if there are multiple paragraphs of content inside the list:

* Foo
* Bar
* Baz

vs.

*   Foo

    Second paragraph

*   Bar

or

1.  Foo

    Second paragraph

1.  Bar

To fix this, ensure the correct number of spaces are used after list marker for your selected document style.

MD032 - Lists should be surrounded by blank lines

Tags: bullet, ul, ol, blank_lines

Aliases: blanks-around-lists

This rule is triggered when lists (of any kind) are either not preceded or not followed by a blank line:

Some text
* Some
* List

1. Some
2. List
Some text

To fix this, ensure that all lists have a blank line both before and after (except where the block is at the beginning or end of the document):

Some text

* Some
* List

1. Some
2. List

Some text

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse lists that don't have blank lines before and after them.

Note: List items without hanging indents are a violation of this rule; list items with hanging indents are okay:

* This is
not okay

* This is
  okay

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD034 - Bare URL used

Tags: links, url

Aliases: no-bare-urls

This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:

For more information, see http://www.example.com/.

To fix this, add angle brackets around the URL:

For more information, see <http:></http:>.

Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.

Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:

`http://www.example.com`

MD034 - Bare URL used

Tags: links, url

Aliases: no-bare-urls

This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:

For more information, see http://www.example.com/.

To fix this, add angle brackets around the URL:

For more information, see <http:></http:>.

Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.

Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:

`http://www.example.com`

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD026 - Trailing punctuation in header

Tags: headers

Aliases: no-trailing-punctuation

Parameters: punctuation (string; default ".,;:!?")

This rule is triggered on any header that has a punctuation character as the last character in the line:

# This is a header.

To fix this, remove any trailing punctuation:

# This is a header

Note: The punctuation parameter can be used to specify what characters class as punctuation at the end of the header. For example, you can set it to '.,;:!' to allow headers with question marks in them, such as might be used in an FAQ.

MD022 - Headers should be surrounded by blank lines

Tags: headers, blank_lines

Aliases: blanks-around-headers

This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:

# Header 1
Some text

Some more text
## Header 2

To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):

# Header 1

Some text

Some more text

## Header 2

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.

MD005 - Inconsistent indentation for list items at the same level

Tags: bullet, ul, indentation

Aliases: list-indent

This rule is triggered when list items are parsed as being at the same level, but don't have the same indentation:

* Item 1
    * Nested Item 1
    * Nested Item 2
   * A misaligned item

Usually this rule will be triggered because of a typo. Correct the indentation for the list to fix it:

* Item 1
  * Nested Item 1
  * Nested Item 2
  * Nested Item 3

MD007 - Unordered list indentation

Tags: bullet, ul, indentation

Aliases: ul-indent

Parameters: indent (number; default 2)

This rule is triggered when list items are not indented by the configured number of spaces (default: 2).

Example:

* List item
   * Nested list item indented by 3 spaces

Corrected Example:

* List item
  * Nested list item indented by 2 spaces

Rationale (2 space indent): indenting by 2 spaces allows the content of a nested list to be in line with the start of the content of the parent list when a single space is used after the list marker.

Rationale (4 space indent): Same indent as code blocks, simpler for editors to implement. See http://www.cirosantilli.com/markdown-styleguide/#indented-lists for more information.

In addition, this is a compatibility issue with multi-markdown parsers, which require a 4 space indents. See http://support.markedapp.com/discussions/problems/21-sub-lists-not-indenting for a description of the problem.

MD009 - Trailing spaces

Tags: whitespace

Aliases: no-trailing-spaces

Parameters: br_spaces (number; default: 0)

This rule is triggered on any lines that end with whitespace. To fix this, find the line that is triggered and remove any trailing spaces from the end.

The brspaces parameter allows an exception to this rule for a specific amount of trailing spaces used to insert an explicit line break/br element. For example, set brspaces to 2 to allow exactly 2 spaces at the end of a line.

Note: you have to set brspaces to 2 or higher for this exception to take effect - you can't insert a br element with just a single trailing space, so if you set brspaces to 1, the exception will be disabled, just as if it was set to the default of 0.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.