AerodyneLabs/Athena

View on GitHub

Showing 32 of 32 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in app/airspace/views/airspace.py and 1 other location - About 3 days to fix
app/airspace/views/center.py on lines 0..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 409.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in app/airspace/views/center.py and 1 other location - About 3 days to fix
app/airspace/views/airspace.py on lines 0..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 409.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in app/airspace/views/tower.py and 1 other location - About 3 days to fix
app/airspace/views/navaid.py on lines 0..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 405.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in app/airspace/views/navaid.py and 1 other location - About 3 days to fix
app/airspace/views/tower.py on lines 0..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 405.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

                ('state', models.CharField(choices=[('AL', 'Alabama'), ('AK', 'Alaska'), ('AS', 'American Samoa'), ('AZ', 'Arizona'), ('AR', 'Arkansas'), ('AA', 'Armed Forces Americas'), ('AE', 'Armed Forces Europe'), ('AP', 'Armed Forces Pacific'), ('CA', 'California'), ('CO', 'Colorado'), ('CT', 'Connecticut'), ('DE', 'Delaware'), ('DC', 'District of Columbia'), ('FL', 'Florida'), ('GA', 'Georgia'), ('GU', 'Guam'), ('HI', 'Hawaii'), ('ID', 'Idaho'), ('IL', 'Illinois'), ('IN', 'Indiana'), ('IA', 'Iowa'), ('KS', 'Kansas'), ('KY', 'Kentucky'), ('LA', 'Louisiana'), ('ME', 'Maine'), ('MD', 'Maryland'), ('MA', 'Massachusetts'), ('MI', 'Michigan'), ('MN', 'Minnesota'), ('MS', 'Mississippi'), ('MO', 'Missouri'), ('MT', 'Montana'), ('NE', 'Nebraska'), ('NV', 'Nevada'), ('NH', 'New Hampshire'), ('NJ', 'New Jersey'), ('NM', 'New Mexico'), ('NY', 'New York'), ('NC', 'North Carolina'), ('ND', 'North Dakota'), ('MP', 'Northern Mariana Islands'), ('OH', 'Ohio'), ('OK', 'Oklahoma'), ('OR', 'Oregon'), ('PA', 'Pennsylvania'), ('PR', 'Puerto Rico'), ('RI', 'Rhode Island'), ('SC', 'South Carolina'), ('SD', 'South Dakota'), ('TN', 'Tennessee'), ('TX', 'Texas'), ('UT', 'Utah'), ('VT', 'Vermont'), ('VI', 'Virgin Islands'), ('VA', 'Virginia'), ('WA', 'Washington'), ('WV', 'West Virginia'), ('WI', 'Wisconsin'), ('WY', 'Wyoming')], max_length=2, blank=True)),
Severity: Major
Found in app/airspace/migrations/0001_initial.py and 2 other locations - About 2 days to fix
app/airspace/migrations/0001_initial.py on lines 50..50
app/airspace/migrations/0001_initial.py on lines 74..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 254.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

                ('state', models.CharField(choices=[('AL', 'Alabama'), ('AK', 'Alaska'), ('AS', 'American Samoa'), ('AZ', 'Arizona'), ('AR', 'Arkansas'), ('AA', 'Armed Forces Americas'), ('AE', 'Armed Forces Europe'), ('AP', 'Armed Forces Pacific'), ('CA', 'California'), ('CO', 'Colorado'), ('CT', 'Connecticut'), ('DE', 'Delaware'), ('DC', 'District of Columbia'), ('FL', 'Florida'), ('GA', 'Georgia'), ('GU', 'Guam'), ('HI', 'Hawaii'), ('ID', 'Idaho'), ('IL', 'Illinois'), ('IN', 'Indiana'), ('IA', 'Iowa'), ('KS', 'Kansas'), ('KY', 'Kentucky'), ('LA', 'Louisiana'), ('ME', 'Maine'), ('MD', 'Maryland'), ('MA', 'Massachusetts'), ('MI', 'Michigan'), ('MN', 'Minnesota'), ('MS', 'Mississippi'), ('MO', 'Missouri'), ('MT', 'Montana'), ('NE', 'Nebraska'), ('NV', 'Nevada'), ('NH', 'New Hampshire'), ('NJ', 'New Jersey'), ('NM', 'New Mexico'), ('NY', 'New York'), ('NC', 'North Carolina'), ('ND', 'North Dakota'), ('MP', 'Northern Mariana Islands'), ('OH', 'Ohio'), ('OK', 'Oklahoma'), ('OR', 'Oregon'), ('PA', 'Pennsylvania'), ('PR', 'Puerto Rico'), ('RI', 'Rhode Island'), ('SC', 'South Carolina'), ('SD', 'South Dakota'), ('TN', 'Tennessee'), ('TX', 'Texas'), ('UT', 'Utah'), ('VT', 'Vermont'), ('VI', 'Virgin Islands'), ('VA', 'Virginia'), ('WA', 'Washington'), ('WV', 'West Virginia'), ('WI', 'Wisconsin'), ('WY', 'Wyoming')], max_length=2, blank=True)),
Severity: Major
Found in app/airspace/migrations/0001_initial.py and 2 other locations - About 2 days to fix
app/airspace/migrations/0001_initial.py on lines 50..50
app/airspace/migrations/0001_initial.py on lines 60..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 254.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

                ('state', models.CharField(choices=[('AL', 'Alabama'), ('AK', 'Alaska'), ('AS', 'American Samoa'), ('AZ', 'Arizona'), ('AR', 'Arkansas'), ('AA', 'Armed Forces Americas'), ('AE', 'Armed Forces Europe'), ('AP', 'Armed Forces Pacific'), ('CA', 'California'), ('CO', 'Colorado'), ('CT', 'Connecticut'), ('DE', 'Delaware'), ('DC', 'District of Columbia'), ('FL', 'Florida'), ('GA', 'Georgia'), ('GU', 'Guam'), ('HI', 'Hawaii'), ('ID', 'Idaho'), ('IL', 'Illinois'), ('IN', 'Indiana'), ('IA', 'Iowa'), ('KS', 'Kansas'), ('KY', 'Kentucky'), ('LA', 'Louisiana'), ('ME', 'Maine'), ('MD', 'Maryland'), ('MA', 'Massachusetts'), ('MI', 'Michigan'), ('MN', 'Minnesota'), ('MS', 'Mississippi'), ('MO', 'Missouri'), ('MT', 'Montana'), ('NE', 'Nebraska'), ('NV', 'Nevada'), ('NH', 'New Hampshire'), ('NJ', 'New Jersey'), ('NM', 'New Mexico'), ('NY', 'New York'), ('NC', 'North Carolina'), ('ND', 'North Dakota'), ('MP', 'Northern Mariana Islands'), ('OH', 'Ohio'), ('OK', 'Oklahoma'), ('OR', 'Oregon'), ('PA', 'Pennsylvania'), ('PR', 'Puerto Rico'), ('RI', 'Rhode Island'), ('SC', 'South Carolina'), ('SD', 'South Dakota'), ('TN', 'Tennessee'), ('TX', 'Texas'), ('UT', 'Utah'), ('VT', 'Vermont'), ('VI', 'Virgin Islands'), ('VA', 'Virginia'), ('WA', 'Washington'), ('WV', 'West Virginia'), ('WI', 'Wisconsin'), ('WY', 'Wyoming')], max_length=2, blank=True)),
Severity: Major
Found in app/airspace/migrations/0001_initial.py and 2 other locations - About 2 days to fix
app/airspace/migrations/0001_initial.py on lines 60..60
app/airspace/migrations/0001_initial.py on lines 74..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 254.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function update_centers has a Cognitive Complexity of 34 (exceeds 5 allowed). Consider refactoring.
Open

def update_centers():
    effective = helpers.get_latest_date()
    logger.info("Updating ARTCC information to %s NASR cycle...", effective)

    data = {}
Severity: Minor
Found in app/airspace/tasks/center.py - About 5 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def test_gfs_url_quarter_degree(self):
        mt = datetime(2015, 7, 31, 6, tzinfo=pytz.utc)
        ft = datetime(2015, 7, 31, 9, tzinfo=pytz.utc)
        url = nomads.gfs_url(model_run=mt, forecast_time=ft, resolution=nomads.GFS_0_25_DEGREE)
        nose.tools.assert_equal(url, 'http://nomads.ncep.noaa.gov/pub/data/nccf/com/gfs/prod/gfs.2015073106/gfs.t06z.pgrb2.0p25.f003')
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 2 other locations - About 4 hrs to fix
app/atmosphere/tests/test_nomads.py on lines 56..60
app/atmosphere/tests/test_nomads.py on lines 62..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def test_gfs_url_one_degree(self):
        mt = datetime(2015, 7, 31, 6, tzinfo=pytz.utc)
        ft = datetime(2015, 7, 31, 9, tzinfo=pytz.utc)
        url = nomads.gfs_url(model_run=mt, forecast_time=ft, resolution=nomads.GFS_1_0_DEGREE)
        nose.tools.assert_equal(url, 'http://nomads.ncep.noaa.gov/pub/data/nccf/com/gfs/prod/gfs.2015073106/gfs.t06z.pgrb2.1p00.f003')
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 2 other locations - About 4 hrs to fix
app/atmosphere/tests/test_nomads.py on lines 62..66
app/atmosphere/tests/test_nomads.py on lines 68..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def test_gfs_url_half_degree(self):
        mt = datetime(2015, 7, 31, 6, tzinfo=pytz.utc)
        ft = datetime(2015, 7, 31, 9, tzinfo=pytz.utc)
        url = nomads.gfs_url(model_run=mt, forecast_time=ft, resolution=nomads.GFS_0_5_DEGREE)
        nose.tools.assert_equal(url, 'http://nomads.ncep.noaa.gov/pub/data/nccf/com/gfs/prod/gfs.2015073106/gfs.t06z.pgrb2.0p50.f003')
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 2 other locations - About 4 hrs to fix
app/atmosphere/tests/test_nomads.py on lines 56..60
app/atmosphere/tests/test_nomads.py on lines 68..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function update_airspace has a Cognitive Complexity of 21 (exceeds 5 allowed). Consider refactoring.
Open

def update_airspace():
    effective = helpers.get_latest_date()
    logger.info("Updating airspace information to %s NASR cycle...", effective)

    as_fn = helpers.download_latest_file('class_airspace_shape_files.zip')
Severity: Minor
Found in app/airspace/tasks/airspace.py - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def test_previous_forecast_max(self):
        mt = datetime(2015, 7, 31, 6)
        ft = datetime(2015, 8, 11, 10)
        nose.tools.assert_equal(nomads.previous_forecast(mt, ft), datetime(2015, 8, 10, 6))
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 1 other location - About 2 hrs to fix
app/atmosphere/tests/test_nomads.py on lines 21..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def test_previous_forecast(self):
        mt = datetime(2015, 7, 31, 6)
        ft = datetime(2015, 7, 31, 10)
        nose.tools.assert_equal(nomads.previous_forecast(mt, ft), datetime(2015, 7, 31, 9))
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 1 other location - About 2 hrs to fix
app/atmosphere/tests/test_nomads.py on lines 26..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function update_navaids has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
Open

def update_navaids():
    count = 0
    effective = helpers.get_latest_date()
    logger.info("Updating navaid information to %s NASR cycle...", effective)

Severity: Minor
Found in app/airspace/tasks/navaid.py - About 1 hr to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Function update_towers has a Cognitive Complexity of 14 (exceeds 5 allowed). Consider refactoring.
Open

def update_towers():
    effective = helpers.get_latest_date()
    logger.info("Updating tower information to %s NASR cycle...", effective)

    defferred = []
Severity: Minor
Found in app/airspace/tasks/tower.py - About 1 hr to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def test_gfs_url_early_forecast(self):
        mt = datetime(2015, 7, 31, 6)
        ft = datetime(2015, 7, 31, 5)
        nose.tools.assert_raises(ValueError, nomads.gfs_url, mt, ft)
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 1 other location - About 1 hr to fix
app/atmosphere/tests/test_nomads.py on lines 31..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def test_gfs_url_naive_model(self):
        mt = datetime(2015, 7, 31, 6)
        ft = datetime(2015, 7, 31, 9)
        nose.tools.assert_raises(ValueError, nomads.gfs_url, mt, ft)
Severity: Major
Found in app/atmosphere/tests/test_nomads.py and 1 other location - About 1 hr to fix
app/atmosphere/tests/test_nomads.py on lines 41..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            if result[1]:
                logger.info("Created %s-%s...", facility_id, rec['name'])
            else:
                logger.info("Updated %s-%s...", facility_id, rec['name'])
Severity: Major
Found in app/airspace/tasks/center.py and 2 other locations - About 1 hr to fix
app/airspace/tasks/tower.py on lines 76..79
app/airspace/tasks/tower.py on lines 87..90

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 45.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if result[1]:
            logger.info("Created %s-%s...", facility_id, data['name'])
        else:
            logger.info("Updated %s-%s...", facility_id, data['name'])
Severity: Major
Found in app/airspace/tasks/tower.py and 2 other locations - About 1 hr to fix
app/airspace/tasks/center.py on lines 117..120
app/airspace/tasks/tower.py on lines 76..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 45.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language