Cyclomatic complexity is too high in method execute_command. (6) Open
def execute_command(self):
"""
The generate command uses `Jinja2 <http://jinja.pocoo.org/>`_ templates \
to create Python scripts, according to the specification in the configuration \
file. The predefined templates use the extract_content() method of the \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Cyclomatic Complexity
Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.
Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:
Construct | Effect on CC | Reasoning |
---|---|---|
if | +1 | An if statement is a single decision. |
elif | +1 | The elif statement adds another decision. |
else | +0 | The else statement does not cause a new decision. The decision is at the if. |
for | +1 | There is a decision at the start of the loop. |
while | +1 | There is a decision at the while statement. |
except | +1 | Each except branch adds a new conditional path of execution. |
finally | +0 | The finally block is unconditionally executed. |
with | +1 | The with statement roughly corresponds to a try/except block (see PEP 343 for details). |
assert | +1 | The assert statement internally roughly equals a conditional statement. |
Comprehension | +1 | A list/set/dict comprehension of generator expression is equivalent to a for loop. |
Boolean Operator | +1 | Every boolean operator (and, or) adds a decision point. |
Identical blocks of code found in 2 locations. Consider refactoring. Open
try:
with open(self.args['<projectname>'] + '.json', 'r') as f:
config = json.load(f)
if self.args['--output_type'] == 'csv':
from scrapple.utils.config import extract_fieldnames
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 57.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
print(Back.WHITE + Fore.RED + self.args['<output_filename>'], \
".py has been created" + Back.RESET + Fore.RESET, sep="")
- Read upRead up
- Create a ticketCreate a ticket
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 52.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Trailing whitespace Open
is the equivalent of using the Scrapple :ref:`run command <command-run>`.
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Line too long (89 > 79 characters) Open
"exist. Use ``scrapple genconfig``." + Back.RESET + Fore.RESET, sep="")
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (89 > 79 characters) Open
and use recursive for loops to implement multiple levels of link crawlers. This \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (81 > 79 characters) Open
The generate command uses `Jinja2 <http://jinja.pocoo.org/>`_ templates \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (80 > 79 characters) Open
file. The predefined templates use the extract_content() method of the \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
The backslash is redundant between brackets Open
print(Back.WHITE + Fore.RED + self.args['<output_filename>'], \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Avoid explicit line join between brackets.
The preferred way of wrapping long lines is by using Python's
implied line continuation inside parentheses, brackets and braces.
Long lines can be broken over multiple lines by wrapping expressions
in parentheses. These should be used in preference to using a
backslash for line continuation.
E502: aaa = [123, \\n 123]
E502: aaa = ("bbb " \\n "ccc")
Okay: aaa = [123,\n 123]
Okay: aaa = ("bbb "\n "ccc")
Okay: aaa = "bbb " \\n "ccc"
Okay: aaa = 123 # \\
Line too long (81 > 79 characters) Open
:ref:`utility function <implementation-utils>`, using the loop depth to \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Trailing whitespace Open
written into a JSON document or a CSV document.
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Line too long (87 > 79 characters) Open
to create Python scripts, according to the specification in the configuration \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (91 > 79 characters) Open
:ref:`selector classes <implementation-selectors>` to implement linear extractors \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
The backslash is redundant between brackets Open
print(Back.WHITE + Fore.RED + self.args['<projectname>'], ".json does not ", \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Avoid explicit line join between brackets.
The preferred way of wrapping long lines is by using Python's
implied line continuation inside parentheses, brackets and braces.
Long lines can be broken over multiple lines by wrapping expressions
in parentheses. These should be used in preference to using a
backslash for line continuation.
E502: aaa = [123, \\n 123]
E502: aaa = ("bbb " \\n "ccc")
Okay: aaa = [123,\n 123]
Okay: aaa = ("bbb "\n "ccc")
Okay: aaa = "bbb " \\n "ccc"
Okay: aaa = 123 # \\
Line too long (83 > 79 characters) Open
According to the --output_type argument in the CLI input, the results are \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Trailing whitespace Open
differentiate between levels of the crawler execution.
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
Line too long (84 > 79 characters) Open
The Python script is written into <output_filename>.py - running this file \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (90 > 79 characters) Open
print(Back.WHITE + Fore.RED + self.args['<projectname>'], ".json does not ", \
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.
Line too long (81 > 79 characters) Open
is the equivalent of using the Scrapple :ref:`run command <command-run>`.
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Limit all lines to a maximum of 79 characters.
There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side. The default wrapping on such
devices looks ugly. Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.
Reports error E501.