}

Close

disallow all tabs (no-tabs)

Some style guides don't allow the use of tab characters at all, including within comments.

Rule Details

This rule looks for tabs anywhere inside a file: code, comments or anything else.

Examples of incorrect code for this rule:

var a /t= 2;

/**
* /t/t it's a test function
*/
function test(){}

var x = 1; // /t test

Examples of correct code for this rule:

var a = 2;

/**
* it's a test function
*/
function test(){}

var x = 1; // test

When Not To Use It

If you have established a standard where having tabs is fine.

Compatibility

• JSCS: disallowTabs Source: http://eslint.org/docs/rules/

                 {

Close

disallow mixed spaces and tabs for indentation (no-mixed-spaces-and-tabs)

Most code conventions require either tabs or spaces be used for indentation. As such, it's usually an error if a single line of code is indented with both tabs and spaces.

Rule Details

This rule disallows mixed spaces and tabs for indentation.

Examples of incorrect code for this rule:

/*eslint no-mixed-spaces-and-tabs: "error"*/

function add(x, y) {
// --->..return x + y;

      return x + y;
}

function main() {
// --->var x = 5,
// --->....y = 7;

    var x = 5,
        y = 7;
}

Examples of correct code for this rule:

/*eslint no-mixed-spaces-and-tabs: "error"*/

function add(x, y) {
// --->return x + y;
    return x + y;
}

Options

This rule has a string option.

• "smart-tabs" allows mixed spaces and tabs when the latter are used for alignment.

smart-tabs

Examples of correct code for this rule with the "smart-tabs" option:

/*eslint no-mixed-spaces-and-tabs: ["error", "smart-tabs"]*/

function main() {
// --->var x = 5,
// --->....y = 7;

    var x = 5,
        y = 7;
}

Further Reading

• Smart Tabs Source: http://eslint.org/docs/rules/

    })

Close

require or disallow padding within blocks (padded-blocks)

Some style guides require block statements to start and end with blank lines. The goal is to improve readability by visually separating the block content and the surrounding code.

if (a) {

    b();

}

Since it's good to have a consistent code style, you should either always write padded blocks or never do it.

Rule Details

This rule enforces consistent empty line padding within blocks.

Options

This rule has one option, which can be a string option or an object option.

String option:

• "always" (default) requires empty lines at the beginning and ending of block statements (except switch statements and classes)
• "never" disallows empty lines at the beginning and ending of block statements (except switch statements and classes)

Object option:

• "blocks" require or disallow padding within block statements
• "classes" require or disallow padding within classes
• "switches" require or disallow padding within switch statements

always

Examples of incorrect code for this rule with the default "always" option:

/*eslint padded-blocks: ["error", "always"]*/

if (a) {
    b();
}

if (a) { b(); }

if (a)
{
    b();
}

if (a) {

    b();
}

if (a) {
    b();

}

if (a) {
    // comment
    b();

}

Examples of correct code for this rule with the default "always" option:

/*eslint padded-blocks: ["error", "always"]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    // comment
    b();

}

never

Examples of incorrect code for this rule with the "never" option:

/*eslint padded-blocks: ["error", "never"]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    b();
}

if (a) {
    b();

}

Examples of correct code for this rule with the "never" option:

/*eslint padded-blocks: ["error", "never"]*/

if (a) {
    b();
}

if (a)
{
    b();
}

blocks

Examples of incorrect code for this rule with the { "blocks": "always" } option:

/*eslint padded-blocks: ["error", { "blocks": "always" }]*/

if (a) {
    b();
}

if (a) { b(); }

if (a)
{
    b();
}

if (a) {

    b();
}

if (a) {
    b();

}

if (a) {
    // comment
    b();

}

Examples of correct code for this rule with the { "blocks": "always" } option:

/*eslint padded-blocks: ["error", { "blocks": "always" }]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    // comment
    b();

}

Examples of incorrect code for this rule with the { "blocks": "never" } option:

/*eslint padded-blocks: ["error", { "blocks": "never" }]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    b();
}

if (a) {
    b();

}

Examples of correct code for this rule with the { "blocks": "never" } option:

/*eslint padded-blocks: ["error", { "blocks": "never" }]*/

if (a) {
    b();
}

if (a)
{
    b();
}

classes

Examples of incorrect code for this rule with the { "classes": "always" } option:

/*eslint padded-blocks: ["error", { "classes": "always" }]*/

class  A {
    constructor(){
    }
}

Examples of correct code for this rule with the { "classes": "always" } option:

/*eslint padded-blocks: ["error", { "classes": "always" }]*/

class  A {

    constructor(){
    }

}

Examples of incorrect code for this rule with the { "classes": "never" } option:

/*eslint padded-blocks: ["error", { "classes": "never" }]*/

class  A {

    constructor(){
    }

}

Examples of correct code for this rule with the { "classes": "never" } option:

/*eslint padded-blocks: ["error", { "classes": "never" }]*/

class  A {
    constructor(){
    }
}

switches

Examples of incorrect code for this rule with the { "switches": "always" } option:

/*eslint padded-blocks: ["error", { "switches": "always" }]*/

switch (a) {
    case 0: foo();
}

Examples of correct code for this rule with the { "switches": "always" } option:

/*eslint padded-blocks: ["error", { "switches": "always" }]*/

switch (a) {

    case 0: foo();

}

if (a) {
    b();
}

Examples of incorrect code for this rule with the { "switches": "never" } option:

/*eslint padded-blocks: ["error", { "switches": "never" }]*/

switch (a) {

    case 0: foo();

}

Examples of correct code for this rule with the { "switches": "never" } option:

/*eslint padded-blocks: ["error", { "switches": "never" }]*/

switch (a) {
    case 0: foo();
}

if (a) {

    b();

}

When Not To Use It

You can turn this rule off if you are not concerned with the consistency of padding within blocks. Source: http://eslint.org/docs/rules/

    // Continuously check the reval directory to check if the end file exists for 30 seconds, after which a link

Close

disallow all tabs (no-tabs)

Some style guides don't allow the use of tab characters at all, including within comments.

Rule Details

This rule looks for tabs anywhere inside a file: code, comments or anything else.

Examples of incorrect code for this rule:

var a /t= 2;

/**
* /t/t it's a test function
*/
function test(){}

var x = 1; // /t test

Examples of correct code for this rule:

var a = 2;

/**
* it's a test function
*/
function test(){}

var x = 1; // test

When Not To Use It

If you have established a standard where having tabs is fine.

Compatibility

• JSCS: disallowTabs Source: http://eslint.org/docs/rules/

        {

Close

disallow all tabs (no-tabs)

Some style guides don't allow the use of tab characters at all, including within comments.

Rule Details

This rule looks for tabs anywhere inside a file: code, comments or anything else.

Examples of incorrect code for this rule:

var a /t= 2;

/**
* /t/t it's a test function
*/
function test(){}

var x = 1; // /t test

Examples of correct code for this rule:

var a = 2;

/**
* it's a test function
*/
function test(){}

var x = 1; // test

When Not To Use It

If you have established a standard where having tabs is fine.

Compatibility

• JSCS: disallowTabs Source: http://eslint.org/docs/rules/

        },1000);

Close

enforce consistent indentation (indent)

There are several common guidelines which require specific indentation of nested blocks and statements, like:

function hello(indentSize, type) {
    if (indentSize === 4 && type !== 'tab') {
        console.log('Each next indentation will increase on 4 spaces');
    }
}

These are the most common scenarios recommended in different style guides:

• Two spaces, not longer and no tabs: Google, npm, Node.js, Idiomatic, Felix
• Tabs: jQuery
• Four spaces: Crockford

Rule Details

This rule enforces a consistent indentation style. The default style is 4 spaces.

Options

This rule has a mixed option:

For example, for 2-space indentation:

{
    "indent": ["error", 2]
}

Or for tabbed indentation:

{
    "indent": ["error", "tab"]
}

Examples of incorrect code for this rule with the default options:

/*eslint indent: "error"*/

if (a) {
  b=c;
  function foo(d) {
    e=f;
  }
}

Examples of correct code for this rule with the default options:

/*eslint indent: "error"*/

if (a) {
    b=c;
    function foo(d) {
        e=f;
    }
}

This rule has an object option:

• "SwitchCase" (default: 0) enforces indentation level for case clauses in switch statements
• "VariableDeclarator" (default: 1) enforces indentation level for var declarators; can also take an object to define separate rules for var, let and const declarations.
• "outerIIFEBody" (default: 1) enforces indentation level for file-level IIFEs.
• "MemberExpression" (off by default) enforces indentation level for multi-line property chains (except in variable declarations and assignments)
• "FunctionDeclaration" takes an object to define rules for function declarations.
  • parameters (off by default) enforces indentation level for parameters in a function declaration. This can either be a number indicating indentation level, or the string "first" indicating that all parameters of the declaration must be aligned with the first parameter.
  • body (default: 1) enforces indentation level for the body of a function declaration.
• "FunctionExpression" takes an object to define rules for function expressions.
  • parameters (off by default) enforces indentation level for parameters in a function expression. This can either be a number indicating indentation level, or the string "first" indicating that all parameters of the expression must be aligned with the first parameter.
  • body (default: 1) enforces indentation level for the body of a function expression.
• "CallExpression" takes an object to define rules for function call expressions.
  • arguments (off by default) enforces indentation level for arguments in a call expression. This can either be a number indicating indentation level, or the string "first" indicating that all arguments of the expression must be aligned with the first argument.
• "ArrayExpression" (default: 1) enforces indentation level for elements in arrays. It can also be set to the string "first", indicating that all the elements in the array should be aligned with the first element.
• "ObjectExpression" (default: 1) enforces indentation level for properties in objects. It can be set to the string "first", indicating that all properties in the object should be aligned with the first property.

Level of indentation denotes the multiple of the indent specified. Example:

• Indent of 4 spaces with VariableDeclarator set to 2 will indent the multi-line variable declarations with 8 spaces.
• Indent of 2 spaces with VariableDeclarator set to 2 will indent the multi-line variable declarations with 4 spaces.
• Indent of 2 spaces with VariableDeclarator set to {"var": 2, "let": 2, "const": 3} will indent the multi-line variable declarations with 4 spaces for var and let, 6 spaces for const statements.
• Indent of tab with VariableDeclarator set to 2 will indent the multi-line variable declarations with 2 tabs.
• Indent of 2 spaces with SwitchCase set to 0 will not indent case clauses with respect to switch statements.
• Indent of 2 spaces with SwitchCase set to 1 will indent case clauses with 2 spaces with respect to switch statements.
• Indent of 2 spaces with SwitchCase set to 2 will indent case clauses with 4 spaces with respect to switch statements.
• Indent of tab with SwitchCase set to 2 will indent case clauses with 2 tabs with respect to switch statements.
• Indent of 2 spaces with MemberExpression set to 0 will indent the multi-line property chains with 0 spaces.
• Indent of 2 spaces with MemberExpression set to 1 will indent the multi-line property chains with 2 spaces.
• Indent of 2 spaces with MemberExpression set to 2 will indent the multi-line property chains with 4 spaces.
• Indent of 4 spaces with MemberExpression set to 0 will indent the multi-line property chains with 0 spaces.
• Indent of 4 spaces with MemberExpression set to 1 will indent the multi-line property chains with 4 spaces.
• Indent of 4 spaces with MemberExpression set to 2 will indent the multi-line property chains with 8 spaces.

tab

Examples of incorrect code for this rule with the "tab" option:

/*eslint indent: ["error", "tab"]*/

if (a) {
     b=c;
function foo(d) {
           e=f;
 }
}

Examples of correct code for this rule with the "tab" option:

/*eslint indent: ["error", "tab"]*/

if (a) {
/*tab*/b=c;
/*tab*/function foo(d) {
/*tab*//*tab*/e=f;
/*tab*/}
}

SwitchCase

Examples of incorrect code for this rule with the 2, { "SwitchCase": 1 } options:

/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/

switch(a){
case "a":
    break;
case "b":
    break;
}

Examples of correct code for this rule with the 2, { "SwitchCase": 1 } option:

/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/

switch(a){
  case "a":
    break;
  case "b":
    break;
}

VariableDeclarator

Examples of incorrect code for this rule with the 2, { "VariableDeclarator": 1 } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/

var a,
    b,
    c;
let a,
    b,
    c;
const a = 1,
    b = 2,
    c = 3;

Examples of correct code for this rule with the 2, { "VariableDeclarator": 1 } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/

var a,
  b,
  c;
let a,
  b,
  c;
const a = 1,
  b = 2,
  c = 3;

Examples of correct code for this rule with the 2, { "VariableDeclarator": 2 } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": 2 }]*/
/*eslint-env es6*/

var a,
    b,
    c;
let a,
    b,
    c;
const a = 1,
    b = 2,
    c = 3;

Examples of correct code for this rule with the 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }]*/
/*eslint-env es6*/

var a,
    b,
    c;
let a,
    b,
    c;
const a = 1,
      b = 2,
      c = 3;

outerIIFEBody

Examples of incorrect code for this rule with the options 2, { "outerIIFEBody": 0 }:

/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/

(function() {

  function foo(x) {
    return x + 1;
  }

})();


if(y) {
console.log('foo');
}

Examples of correct code for this rule with the options 2, {"outerIIFEBody": 0}:

/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/

(function() {

function foo(x) {
  return x + 1;
}

})();


if(y) {
   console.log('foo');
}

MemberExpression

Examples of incorrect code for this rule with the 2, { "MemberExpression": 1 } options:

/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/

foo
.bar
.baz()

Examples of correct code for this rule with the 2, { "MemberExpression": 1 } option:

/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/

foo
  .bar
  .baz();

// Any indentation is permitted in variable declarations and assignments.
var bip = aardvark.badger
                  .coyote;

FunctionDeclaration

Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/

function foo(bar,
  baz,
  qux) {
    qux();
}

Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/

function foo(bar,
    baz,
    qux) {
  qux();
}

Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/

function foo(bar, baz,
  qux, boop) {
  qux();
}

Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/

function foo(bar, baz,
             qux, boop) {
  qux();
}

FunctionExpression

Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/

var foo = function(bar,
  baz,
  qux) {
    qux();
}

Examples of correct code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/

var foo = function(bar,
    baz,
    qux) {
  qux();
}

Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/

var foo = function(bar, baz,
  qux, boop) {
  qux();
}

Examples of correct code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/

var foo = function(bar, baz,
                   qux, boop) {
  qux();
}

CallExpression

Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": 1} } option:

/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/

foo(bar,
    baz,
      qux
);

Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": 1} } option:

/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/

foo(bar,
  baz,
  qux
);

Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": "first"} } option:

/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/

foo(bar, baz,
  baz, boop, beep);

Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": "first"} } option:

/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/

foo(bar, baz,
    baz, boop, beep);

ArrayExpression

Examples of incorrect code for this rule with the 2, { "ArrayExpression": 1 } option:

/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/

var foo = [
    bar,
baz,
      qux
];

Examples of correct code for this rule with the 2, { "ArrayExpression": 1 } option:

/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/

var foo = [
  bar,
  baz,
  qux
];

Examples of incorrect code for this rule with the 2, { "ArrayExpression": "first" } option:

/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/

var foo = [bar,
  baz,
  qux
];

Examples of correct code for this rule with the 2, { "ArrayExpression": "first" } option:

/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/

var foo = [bar,
           baz,
           qux
];

ObjectExpression

Examples of incorrect code for this rule with the 2, { "ObjectExpression": 1 } option:

/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/

var foo = {
    bar: 1,
baz: 2,
      qux: 3
};

Examples of correct code for this rule with the 2, { "ObjectExpression": 1 } option:

/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/

var foo = {
  bar: 1,
  baz: 2,
  qux: 3
};

Examples of incorrect code for this rule with the 2, { "ObjectExpression": "first" } option:

/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/

var foo = { bar: 1,
  baz: 2 };

Examples of correct code for this rule with the 2, { "ObjectExpression": "first" } option:

/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/

var foo = { bar: 1,
            baz: 2 };

Compatibility

• JSHint: indent
• JSCS: validateIndentation Source: http://eslint.org/docs/rules/

                 write_to_file.on('error',function(err)

Close

Require or disallow a space before function parenthesis (space-before-function-paren)

When formatting a function, whitespace is allowed between the function name or function keyword and the opening paren. Named functions also require a space between the function keyword and the function name, but anonymous functions require no whitespace. For example:

function withoutSpace(x) {
    // ...
}

function withSpace (x) {
    // ...
}

var anonymousWithoutSpace = function() {};

var anonymousWithSpace = function () {};

Style guides may require a space after the function keyword for anonymous functions, while others specify no whitespace. Similarly, the space after a function name may or may not be required.

Rule Details

This rule aims to enforce consistent spacing before function parentheses and as such, will warn whenever whitespace doesn't match the preferences specified.

Options

This rule has a string option or an object option:

{
    "space-before-function-paren": ["error", "always"],
    // or
    "space-before-function-paren": ["error", {
        "anonymous": "always",
        "named": "always",
        "asyncArrow": "ignore"
    }],
}

• always (default) requires a space followed by the ( of arguments.
• never disallows any space followed by the ( of arguments.

The string option does not check async arrow function expressions for backward compatibility.

You can also use a separate option for each type of function. Each of the following options can be set to "always", "never", or "ignore". Default is "always" basically.

• anonymous is for anonymous function expressions (e.g. function () {}).
• named is for named function expressions (e.g. function foo () {}).
• asyncArrow is for async arrow function expressions (e.g. async () => {}). asyncArrow is set to "ignore" by default for backwards compatibility.

"always"

Examples of incorrect code for this rule with the default "always" option:

/*eslint space-before-function-paren: "error"*/
/*eslint-env es6*/

function foo() {
    // ...
}

var bar = function() {
    // ...
};

var bar = function foo() {
    // ...
};

class Foo {
    constructor() {
        // ...
    }
}

var foo = {
    bar() {
        // ...
    }
};

Examples of correct code for this rule with the default "always" option:

/*eslint space-before-function-paren: "error"*/
/*eslint-env es6*/

function foo () {
    // ...
}

var bar = function () {
    // ...
};

var bar = function foo () {
    // ...
};

class Foo {
    constructor () {
        // ...
    }
}

var foo = {
    bar () {
        // ...
    }
};

// async arrow function expressions are ignored by default.
var foo = async () => 1
var foo = async() => 1

"never"

Examples of incorrect code for this rule with the "never" option:

/*eslint space-before-function-paren: ["error", "never"]*/
/*eslint-env es6*/

function foo () {
    // ...
}

var bar = function () {
    // ...
};

var bar = function foo () {
    // ...
};

class Foo {
    constructor () {
        // ...
    }
}

var foo = {
    bar () {
        // ...
    }
};

Examples of correct code for this rule with the "never" option:

/*eslint space-before-function-paren: ["error", "never"]*/
/*eslint-env es6*/

function foo() {
    // ...
}

var bar = function() {
    // ...
};

var bar = function foo() {
    // ...
};

class Foo {
    constructor() {
        // ...
    }
}

var foo = {
    bar() {
        // ...
    }
};

// async arrow function expressions are ignored by default.
var foo = async () => 1
var foo = async() => 1

{"anonymous": "always", "named": "never", "asyncArrow": "always"}

Examples of incorrect code for this rule with the {"anonymous": "always", "named": "never", "asyncArrow": "always"} option:

/*eslint space-before-function-paren: ["error", {"anonymous": "always", "named": "never", "asyncArrow": "always"}]*/
/*eslint-env es6*/

function foo () {
    // ...
}

var bar = function() {
    // ...
};

class Foo {
    constructor () {
        // ...
    }
}

var foo = {
    bar () {
        // ...
    }
};

var foo = async(a) => await a

Examples of correct code for this rule with the {"anonymous": "always", "named": "never", "asyncArrow": "always"} option:

/*eslint space-before-function-paren: ["error", {"anonymous": "always", "named": "never", "asyncArrow": "always"}]*/
/*eslint-env es6*/

function foo() {
    // ...
}

var bar = function () {
    // ...
};

class Foo {
    constructor() {
        // ...
    }
}

var foo = {
    bar() {
        // ...
    }
};

var foo = async (a) => await a

{"anonymous": "never", "named": "always"}

Examples of incorrect code for this rule with the {"anonymous": "never", "named": "always"} option:

/*eslint space-before-function-paren: ["error", { "anonymous": "never", "named": "always" }]*/
/*eslint-env es6*/

function foo() {
    // ...
}

var bar = function () {
    // ...
};

class Foo {
    constructor() {
        // ...
    }
}

var foo = {
    bar() {
        // ...
    }
};

Examples of correct code for this rule with the {"anonymous": "never", "named": "always"} option:

/*eslint space-before-function-paren: ["error", { "anonymous": "never", "named": "always" }]*/
/*eslint-env es6*/

function foo () {
    // ...
}

var bar = function() {
    // ...
};

class Foo {
    constructor () {
        // ...
    }
}

var foo = {
    bar () {
        // ...
    }
};

{"anonymous": "ignore", "named": "always"}

Examples of incorrect code for this rule with the {"anonymous": "ignore", "named": "always"} option:

/*eslint space-before-function-paren: ["error", { "anonymous": "ignore", "named": "always" }]*/
/*eslint-env es6*/

function foo() {
    // ...
}

class Foo {
    constructor() {
        // ...
    }
}

var foo = {
    bar() {
        // ...
    }
};

Examples of correct code for this rule with the {"anonymous": "ignore", "named": "always"} option:

/*eslint space-before-function-paren: ["error", { "anonymous": "ignore", "named": "always" }]*/
/*eslint-env es6*/

var bar = function() {
    // ...
};

var bar = function () {
    // ...
};

function foo () {
    // ...
}

class Foo {
    constructor () {
        // ...
    }
}

var foo = {
    bar () {
        // ...
    }
};

When Not To Use It

You can turn this rule off if you are not concerned with the consistency of spacing before function parenthesis.

Related Rules

• [space-after-keywords](space-after-keywords.md)
• [space-return-throw-case](space-return-throw-case.md) Source: http://eslint.org/docs/rules/

    socket.on('logout',function(data)

Close

Disallow Unused Variables (no-unused-vars)

Variables that are declared and not used anywhere in the code are most likely an error due to incomplete refactoring. Such variables take up space in the code and can lead to confusion by readers.

Rule Details

This rule is aimed at eliminating unused variables, functions, and parameters of functions.

A variable is considered to be used if any of the following are true:

• It represents a function that is called (doSomething())
• It is read (var y = x)
• It is passed into a function as an argument (doSomething(x))
• It is read inside of a function that is passed to another function (doSomething(function() { foo(); }))

A variable is not considered to be used if it is only ever assigned to (var x = 5) or declared.

Examples of incorrect code for this rule:

/*eslint no-unused-vars: "error"*/
/*global some_unused_var*/

// It checks variables you have defined as global
some_unused_var = 42;

var x;

// Write-only variables are not considered as used.
var y = 10;
y = 5;

// A read for a modification of itself is not considered as used.
var z = 0;
z = z + 1;

// By default, unused arguments cause warnings.
(function(foo) {
    return 5;
})();

// Unused recursive functions also cause warnings.
function fact(n) {
    if (n < 2) return 1;
    return n * fact(n - 1);
}

// When a function definition destructures an array, unused entries from the array also cause warnings.
function getY([x, y]) {
    return y;
}

Examples of correct code for this rule:

/*eslint no-unused-vars: "error"*/

var x = 10;
alert(x);

// foo is considered used here
myFunc(function foo() {
    // ...
}.bind(this));

(function(foo) {
    return foo;
})();

var myFunc;
myFunc = setTimeout(function() {
    // myFunc is considered used
    myFunc();
}, 50);

// Only the second argument from the descructured array is used.
function getY([, y]) {
    return y;
}

exported

In environments outside of CommonJS or ECMAScript modules, you may use var to create a global variable that may be used by other scripts. You can use the /* exported variableName */ comment block to indicate that this variable is being exported and therefore should not be considered unused.

Note that /* exported */ has no effect for any of the following:

• when the environment is node or commonjs
• when parserOptions.sourceType is module
• when ecmaFeatures.globalReturn is true

The line comment // exported variableName will not work as exported is not line-specific.

Examples of correct code for /* exported variableName */ operation:

/* exported global_var */

var global_var = 42;

Options

This rule takes one argument which can be a string or an object. The string settings are the same as those of the vars property (explained below).

By default this rule is enabled with all option for variables and after-used for arguments.

{
    "rules": {
        "no-unused-vars": ["error", { "vars": "all", "args": "after-used", "ignoreRestSiblings": false }]
    }
}

vars

The vars option has two settings:

• all checks all variables for usage, including those in the global scope. This is the default setting.
• local checks only that locally-declared variables are used but will allow global variables to be unused.

vars: local

Examples of correct code for the { "vars": "local" } option:

/*eslint no-unused-vars: ["error", { "vars": "local" }]*/
/*global some_unused_var */

some_unused_var = 42;

varsIgnorePattern

The varsIgnorePattern option specifies exceptions not to check for usage: variables whose names match a regexp pattern. For example, variables whose names contain ignored or Ignored.

Examples of correct code for the { "varsIgnorePattern": "[iI]gnored" } option:

/*eslint no-unused-vars: ["error", { "varsIgnorePattern": "[iI]gnored" }]*/

var firstVarIgnored = 1;
var secondVar = 2;
console.log(secondVar);

args

The args option has three settings:

• after-used - only the last argument must be used. This allows you, for instance, to have two named parameters to a function and as long as you use the second argument, ESLint will not warn you about the first. This is the default setting.
• all - all named arguments must be used.
• none - do not check arguments.

args: after-used

Examples of incorrect code for the default { "args": "after-used" } option:

/*eslint no-unused-vars: ["error", { "args": "after-used" }]*/

// 1 error
// "baz" is defined but never used
(function(foo, bar, baz) {
    return bar;
})();

Examples of correct code for the default { "args": "after-used" } option:

/*eslint no-unused-vars: ["error", {"args": "after-used"}]*/

(function(foo, bar, baz) {
    return baz;
})();

args: all

Examples of incorrect code for the { "args": "all" } option:

/*eslint no-unused-vars: ["error", { "args": "all" }]*/

// 2 errors
// "foo" is defined but never used
// "baz" is defined but never used
(function(foo, bar, baz) {
    return bar;
})();

args: none

Examples of correct code for the { "args": "none" } option:

/*eslint no-unused-vars: ["error", { "args": "none" }]*/

(function(foo, bar, baz) {
    return bar;
})();

ignoreRestSiblings

The ignoreRestSiblings option is a boolean (default: false). Using a Rest Property it is possible to "omit" properties from an object, but by default the sibling properties are marked as "unused". With this option enabled the rest property's siblings are ignored.

Examples of correct code for the { "ignoreRestSiblings": true } option:

/*eslint no-unused-vars: ["error", { "ignoreRestSiblings": true }]*/
// 'type' is ignored because it has a rest property sibling.
var { type, ...coords } = data;

argsIgnorePattern

The argsIgnorePattern option specifies exceptions not to check for usage: arguments whose names match a regexp pattern. For example, variables whose names begin with an underscore.

Examples of correct code for the { "argsIgnorePattern": "^_" } option:

/*eslint no-unused-vars: ["error", { "argsIgnorePattern": "^_" }]*/

function foo(x, _y) {
    return x + 1;
}
foo();

caughtErrors

The caughtErrors option is used for catch block arguments validation.

It has two settings:

• none - do not check error objects. This is the default setting.
• all - all named arguments must be used.

caughtErrors: none

Not specifying this rule is equivalent of assigning it to none.

Examples of correct code for the { "caughtErrors": "none" } option:

/*eslint no-unused-vars: ["error", { "caughtErrors": "none" }]*/

try {
    //...
} catch (err) {
    console.error("errors");
}

caughtErrors: all

Examples of incorrect code for the { "caughtErrors": "all" } option:

/*eslint no-unused-vars: ["error", { "caughtErrors": "all" }]*/

// 1 error
// "err" is defined but never used
try {
    //...
} catch (err) {
    console.error("errors");
}

caughtErrorsIgnorePattern

The caughtErrorsIgnorePattern option specifies exceptions not to check for usage: catch arguments whose names match a regexp pattern. For example, variables whose names begin with a string 'ignore'.

Examples of correct code for the { "caughtErrorsIgnorePattern": "^ignore" } option:

/*eslint no-unused-vars: ["error", { "caughtErrorsIgnorePattern": "^ignore" }]*/

try {
    //...
} catch (ignoreErr) {
    console.error("errors");
}

When Not To Use It

If you don't want to be notified about unused variables or function arguments, you can safely turn this rule off. Source: http://eslint.org/docs/rules/

        delete socket.handshake.session.key

Close

disallow all tabs (no-tabs)

Some style guides don't allow the use of tab characters at all, including within comments.

Rule Details

This rule looks for tabs anywhere inside a file: code, comments or anything else.

Examples of incorrect code for this rule:

var a /t= 2;

/**
* /t/t it's a test function
*/
function test(){}

var x = 1; // /t test

Examples of correct code for this rule:

var a = 2;

/**
* it's a test function
*/
function test(){}

var x = 1; // test

When Not To Use It

If you have established a standard where having tabs is fine.

Compatibility

• JSCS: disallowTabs Source: http://eslint.org/docs/rules/

        delete socket.handshake.session.key

Close

require or disallow semicolons instead of ASI (semi)

JavaScript is unique amongst the C-like languages in that it doesn't require semicolons at the end of each statement. In many cases, the JavaScript engine can determine that a semicolon should be in a certain spot and will automatically add it. This feature is known as automatic semicolon insertion (ASI) and is considered one of the more controversial features of JavaScript. For example, the following lines are both valid:

var name = "ESLint"
var website = "eslint.org";

On the first line, the JavaScript engine will automatically insert a semicolon, so this is not considered a syntax error. The JavaScript engine still knows how to interpret the line and knows that the line end indicates the end of the statement.

In the debate over ASI, there are generally two schools of thought. The first is that we should treat ASI as if it didn't exist and always include semicolons manually. The rationale is that it's easier to always include semicolons than to try to remember when they are or are not required, and thus decreases the possibility of introducing an error.

However, the ASI mechanism can sometimes be tricky to people who are using semicolons. For example, consider this code:

return
{
    name: "ESLint"
};

This may look like a return statement that returns an object literal, however, the JavaScript engine will interpret this code as:

return;
{
    name: "ESLint";
}

Effectively, a semicolon is inserted after the return statement, causing the code below it (a labeled literal inside a block) to be unreachable. This rule and the [no-unreachable](no-unreachable.md) rule will protect your code from such cases.

On the other side of the argument are those who says that since semicolons are inserted automatically, they are optional and do not need to be inserted manually. However, the ASI mechanism can also be tricky to people who don't use semicolons. For example, consider this code:

var globalCounter = { }

(function () {
    var n = 0
    globalCounter.increment = function () {
        return ++n
    }
})()

In this example, a semicolon will not be inserted after the first line, causing a run-time error (because an empty object is called as if it's a function). The [no-unexpected-multiline](no-unexpected-multiline.md) rule can protect your code from such cases.

Although ASI allows for more freedom over your coding style, it can also make your code behave in an unexpected way, whether you use semicolons or not. Therefore, it is best to know when ASI takes place and when it does not, and have ESLint protect your code from these potentially unexpected cases. In short, as once described by Isaac Schlueter, a \n character always ends a statement (just like a semicolon) unless one of the following is true:

1. The statement has an unclosed paren, array literal, or object literal or ends in some other way that is not a valid way to end a statement. (For instance, ending with . or ,.)
2. The line is -- or ++ (in which case it will decrement/increment the next token.)
3. It is a for(), while(), do, if(), or else, and there is no {
4. The next line starts with [, (, +, *, /, -, ,, ., or some other binary operator that can only be found between two tokens in a single expression.

Rule Details

This rule enforces consistent use of semicolons.

Options

This rule has two options, a string option and an object option.

String option:

• "always" (default) requires semicolons at the end of statements
• "never" disallows semicolons as the end of statements (except to disambiguate statements beginning with [, (, /, +, or -)

Object option:

• "omitLastInOneLineBlock": true ignores the last semicolon in a block in which its braces (and therefore the content of the block) are in the same line

always

Examples of incorrect code for this rule with the default "always" option:

/*eslint semi: ["error", "always"]*/

var name = "ESLint"

object.method = function() {
    // ...
}

Examples of correct code for this rule with the default "always" option:

/*eslint semi: "error"*/

var name = "ESLint";

object.method = function() {
    // ...
};

never

Examples of incorrect code for this rule with the "never" option:

/*eslint semi: ["error", "never"]*/

var name = "ESLint";

object.method = function() {
    // ...
};

Examples of correct code for this rule with the "never" option:

/*eslint semi: ["error", "never"]*/

var name = "ESLint"

object.method = function() {
    // ...
}

var name = "ESLint"

;(function() {
    // ...
})()

omitLastInOneLineBlock

Examples of additional correct code for this rule with the "always", { "omitLastInOneLineBlock": true } options:

/*eslint semi: ["error", "always", { "omitLastInOneLineBlock": true}] */

if (foo) { bar() }

if (foo) { bar(); baz() }

When Not To Use It

If you do not want to enforce semicolon usage (or omission) in any particular way, then you can turn this rule off.

Further Reading

• An Open Letter to JavaScript Leaders Regarding Semicolons
• JavaScript Semicolon Insertion

Related Rules

• [no-extra-semi](no-extra-semi.md)
• [no-unexpected-multiline](no-unexpected-multiline.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

        socket.emit('logged out');

Close

disallow all tabs (no-tabs)

Some style guides don't allow the use of tab characters at all, including within comments.

Rule Details

This rule looks for tabs anywhere inside a file: code, comments or anything else.

Examples of incorrect code for this rule:

var a /t= 2;

/**
* /t/t it's a test function
*/
function test(){}

var x = 1; // /t test

Examples of correct code for this rule:

var a = 2;

/**
* it's a test function
*/
function test(){}

var x = 1; // test

When Not To Use It

If you have established a standard where having tabs is fine.

Compatibility

• JSCS: disallowTabs Source: http://eslint.org/docs/rules/

    {

Close

Require Brace Style (brace-style)

Brace style is closely related to indent style in programming and describes the placement of braces relative to their control statement and body. There are probably a dozen, if not more, brace styles in the world.

The one true brace style is one of the most common brace styles in JavaScript, in which the opening brace of a block is placed on the same line as its corresponding statement or declaration. For example:

if (foo) {
  bar();
} else {
  baz();
}

One common variant of one true brace style is called Stroustrup, in which the else statements in an if-else construct, as well as catch and finally, must be on its own line after the preceding closing brace. For example:

if (foo) {
  bar();
}
else {
  baz();
}

Another style is called Allman, in which all the braces are expected to be on their own lines without any extra indentation. For example:

if (foo)
{
  bar();
}
else
{
  baz();
}

While no style is considered better than the other, most developers agree that having a consistent style throughout a project is important for its long-term maintainability.

Rule Details

This rule enforces consistent brace style for blocks.

Options

This rule has a string option:

• "1tbs" (default) enforces one true brace style
• "stroustrup" enforces Stroustrup style
• "allman" enforces Allman style

This rule has an object option for an exception:

• "allowSingleLine": true (default false) allows the opening and closing braces for a block to be on the same line

1tbs

Examples of incorrect code for this rule with the default "1tbs" option:

/*eslint brace-style: "error"*/

function foo()
{
  return true;
}

if (foo)
{
  bar();
}

try
{
  somethingRisky();
} catch(e)
{
  handleError();
}

if (foo) {
  bar();
}
else {
  baz();
}

Examples of correct code for this rule with the default "1tbs" option:

/*eslint brace-style: "error"*/

function foo() {
  return true;
}

if (foo) {
  bar();
}

if (foo) {
  bar();
} else {
  baz();
}

try {
  somethingRisky();
} catch(e) {
  handleError();
}

// when there are no braces, there are no problems
if (foo) bar();
else if (baz) boom();

Examples of correct code for this rule with the "1tbs", { "allowSingleLine": true } options:

/*eslint brace-style: ["error", "1tbs", { "allowSingleLine": true }]*/

function nop() { return; }

if (foo) { bar(); }

if (foo) { bar(); } else { baz(); }

try { somethingRisky(); } catch(e) { handleError(); }

stroustrup

Examples of incorrect code for this rule with the "stroustrup" option:

/*eslint brace-style: ["error", "stroustrup"]*/

function foo()
{
  return true;
}

if (foo)
{
  bar();
}

try
{
  somethingRisky();
} catch(e)
{
  handleError();
}

if (foo) {
  bar();
} else {
  baz();
}

Examples of correct code for this rule with the "stroustrup" option:

/*eslint brace-style: ["error", "stroustrup"]*/

function foo() {
  return true;
}

if (foo) {
  bar();
}

if (foo) {
  bar();
}
else {
  baz();
}

try {
  somethingRisky();
}
catch(e) {
  handleError();
}

// when there are no braces, there are no problems
if (foo) bar();
else if (baz) boom();

Examples of correct code for this rule with the "stroustrup", { "allowSingleLine": true } options:

/*eslint brace-style: ["error", "stroustrup", { "allowSingleLine": true }]*/

function nop() { return; }

if (foo) { bar(); }

if (foo) { bar(); }
else { baz(); }

try { somethingRisky(); }
catch(e) { handleError(); }

allman

Examples of incorrect code for this rule with the "allman" option:

/*eslint brace-style: ["error", "allman"]*/

function foo() {
  return true;
}

if (foo)
{
  bar(); }

try
{
  somethingRisky();
} catch(e)
{
  handleError();
}

if (foo) {
  bar();
} else {
  baz();
}

Examples of correct code for this rule with the "allman" option:

/*eslint brace-style: ["error", "allman"]*/

function foo()
{
  return true;
}

if (foo)
{
  bar();
}

if (foo)
{
  bar();
}
else
{
  baz();
}

try
{
  somethingRisky();
}
catch(e)
{
  handleError();
}

// when there are no braces, there are no problems
if (foo) bar();
else if (baz) boom();

Examples of correct code for this rule with the "allman", { "allowSingleLine": true } options:

/*eslint brace-style: ["error", "allman", { "allowSingleLine": true }]*/

function nop() { return; }

if (foo) { bar(); }

if (foo) { bar(); }
else { baz(); }

try { somethingRisky(); }
catch(e) { handleError(); }

When Not To Use It

If you don't want to enforce a particular brace style, don't enable this rule.

Further Reading

• Indent style Source: http://eslint.org/docs/rules/

        var time =0;

Close

disallow all tabs (no-tabs)

Some style guides don't allow the use of tab characters at all, including within comments.

Rule Details

This rule looks for tabs anywhere inside a file: code, comments or anything else.

Examples of incorrect code for this rule:

var a /t= 2;

/**
* /t/t it's a test function
*/
function test(){}

var x = 1; // /t test

Examples of correct code for this rule:

var a = 2;

/**
* it's a test function
*/
function test(){}

var x = 1; // test

When Not To Use It

If you have established a standard where having tabs is fine.

Compatibility

• JSCS: disallowTabs Source: http://eslint.org/docs/rules/

            fs.stat('./reval/'+lab+"_reval_score.csv",function(err,stat)

Close

Suggest using arrow functions as callbacks. (prefer-arrow-callback)

Arrow functions are suited to callbacks, because:

• this keywords in arrow functions bind to the upper scope's.
• The notation of the arrow function is shorter than function expression's.

Rule Details

This rule is aimed to flag usage of function expressions in an argument list.

The following patterns are considered problems:

/*eslint prefer-arrow-callback: "error"*/

foo(function(a) { return a; });
foo(function() { return this.a; }.bind(this));

The following patterns are not considered problems:

/*eslint prefer-arrow-callback: "error"*/
/*eslint-env es6*/

foo(a => a);
foo(function*() { yield; });

// this is not a callback.
var foo = function foo(a) { return a; };

// using `this` without `.bind(this)`.
foo(function() { return this.a; });

// recursively.
foo(function bar(n) { return n && n + bar(n - 1); });

Options

This rule takes one optional argument, an object which is an options object.

allowNamedFunctions

This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

Examples of correct code for the { "allowNamedFunctions": true } option:

/*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/

foo(function bar() {});

allowUnboundThis

This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

Examples of incorrect code for the { "allowUnboundThis": false } option:

/*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
/*eslint-env es6*/

foo(function() { this.a; });

foo(function() { (() => this); });

someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

When Not To Use It

This rule should not be used in ES3/5 environments.

In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

                }

Close

enforce consistent indentation (indent)

There are several common guidelines which require specific indentation of nested blocks and statements, like:

function hello(indentSize, type) {
    if (indentSize === 4 && type !== 'tab') {
        console.log('Each next indentation will increase on 4 spaces');
    }
}

These are the most common scenarios recommended in different style guides:

• Two spaces, not longer and no tabs: Google, npm, Node.js, Idiomatic, Felix
• Tabs: jQuery
• Four spaces: Crockford

Rule Details

This rule enforces a consistent indentation style. The default style is 4 spaces.

Options

This rule has a mixed option:

For example, for 2-space indentation:

{
    "indent": ["error", 2]
}

Or for tabbed indentation:

{
    "indent": ["error", "tab"]
}

Examples of incorrect code for this rule with the default options:

/*eslint indent: "error"*/

if (a) {
  b=c;
  function foo(d) {
    e=f;
  }
}

Examples of correct code for this rule with the default options:

/*eslint indent: "error"*/

if (a) {
    b=c;
    function foo(d) {
        e=f;
    }
}

This rule has an object option:

• "SwitchCase" (default: 0) enforces indentation level for case clauses in switch statements
• "VariableDeclarator" (default: 1) enforces indentation level for var declarators; can also take an object to define separate rules for var, let and const declarations.
• "outerIIFEBody" (default: 1) enforces indentation level for file-level IIFEs.
• "MemberExpression" (off by default) enforces indentation level for multi-line property chains (except in variable declarations and assignments)
• "FunctionDeclaration" takes an object to define rules for function declarations.
  • parameters (off by default) enforces indentation level for parameters in a function declaration. This can either be a number indicating indentation level, or the string "first" indicating that all parameters of the declaration must be aligned with the first parameter.
  • body (default: 1) enforces indentation level for the body of a function declaration.
• "FunctionExpression" takes an object to define rules for function expressions.
  • parameters (off by default) enforces indentation level for parameters in a function expression. This can either be a number indicating indentation level, or the string "first" indicating that all parameters of the expression must be aligned with the first parameter.
  • body (default: 1) enforces indentation level for the body of a function expression.
• "CallExpression" takes an object to define rules for function call expressions.
  • arguments (off by default) enforces indentation level for arguments in a call expression. This can either be a number indicating indentation level, or the string "first" indicating that all arguments of the expression must be aligned with the first argument.
• "ArrayExpression" (default: 1) enforces indentation level for elements in arrays. It can also be set to the string "first", indicating that all the elements in the array should be aligned with the first element.
• "ObjectExpression" (default: 1) enforces indentation level for properties in objects. It can be set to the string "first", indicating that all properties in the object should be aligned with the first property.

Level of indentation denotes the multiple of the indent specified. Example:

• Indent of 4 spaces with VariableDeclarator set to 2 will indent the multi-line variable declarations with 8 spaces.
• Indent of 2 spaces with VariableDeclarator set to 2 will indent the multi-line variable declarations with 4 spaces.
• Indent of 2 spaces with VariableDeclarator set to {"var": 2, "let": 2, "const": 3} will indent the multi-line variable declarations with 4 spaces for var and let, 6 spaces for const statements.
• Indent of tab with VariableDeclarator set to 2 will indent the multi-line variable declarations with 2 tabs.
• Indent of 2 spaces with SwitchCase set to 0 will not indent case clauses with respect to switch statements.
• Indent of 2 spaces with SwitchCase set to 1 will indent case clauses with 2 spaces with respect to switch statements.
• Indent of 2 spaces with SwitchCase set to 2 will indent case clauses with 4 spaces with respect to switch statements.
• Indent of tab with SwitchCase set to 2 will indent case clauses with 2 tabs with respect to switch statements.
• Indent of 2 spaces with MemberExpression set to 0 will indent the multi-line property chains with 0 spaces.
• Indent of 2 spaces with MemberExpression set to 1 will indent the multi-line property chains with 2 spaces.
• Indent of 2 spaces with MemberExpression set to 2 will indent the multi-line property chains with 4 spaces.
• Indent of 4 spaces with MemberExpression set to 0 will indent the multi-line property chains with 0 spaces.
• Indent of 4 spaces with MemberExpression set to 1 will indent the multi-line property chains with 4 spaces.
• Indent of 4 spaces with MemberExpression set to 2 will indent the multi-line property chains with 8 spaces.

tab

Examples of incorrect code for this rule with the "tab" option:

/*eslint indent: ["error", "tab"]*/

if (a) {
     b=c;
function foo(d) {
           e=f;
 }
}

Examples of correct code for this rule with the "tab" option:

/*eslint indent: ["error", "tab"]*/

if (a) {
/*tab*/b=c;
/*tab*/function foo(d) {
/*tab*//*tab*/e=f;
/*tab*/}
}

SwitchCase

Examples of incorrect code for this rule with the 2, { "SwitchCase": 1 } options:

/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/

switch(a){
case "a":
    break;
case "b":
    break;
}

Examples of correct code for this rule with the 2, { "SwitchCase": 1 } option:

/*eslint indent: ["error", 2, { "SwitchCase": 1 }]*/

switch(a){
  case "a":
    break;
  case "b":
    break;
}

VariableDeclarator

Examples of incorrect code for this rule with the 2, { "VariableDeclarator": 1 } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/

var a,
    b,
    c;
let a,
    b,
    c;
const a = 1,
    b = 2,
    c = 3;

Examples of correct code for this rule with the 2, { "VariableDeclarator": 1 } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": 1 }]*/
/*eslint-env es6*/

var a,
  b,
  c;
let a,
  b,
  c;
const a = 1,
  b = 2,
  c = 3;

Examples of correct code for this rule with the 2, { "VariableDeclarator": 2 } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": 2 }]*/
/*eslint-env es6*/

var a,
    b,
    c;
let a,
    b,
    c;
const a = 1,
    b = 2,
    c = 3;

Examples of correct code for this rule with the 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } } options:

/*eslint indent: ["error", 2, { "VariableDeclarator": { "var": 2, "let": 2, "const": 3 } }]*/
/*eslint-env es6*/

var a,
    b,
    c;
let a,
    b,
    c;
const a = 1,
      b = 2,
      c = 3;

outerIIFEBody

Examples of incorrect code for this rule with the options 2, { "outerIIFEBody": 0 }:

/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/

(function() {

  function foo(x) {
    return x + 1;
  }

})();


if(y) {
console.log('foo');
}

Examples of correct code for this rule with the options 2, {"outerIIFEBody": 0}:

/*eslint indent: ["error", 2, { "outerIIFEBody": 0 }]*/

(function() {

function foo(x) {
  return x + 1;
}

})();


if(y) {
   console.log('foo');
}

MemberExpression

Examples of incorrect code for this rule with the 2, { "MemberExpression": 1 } options:

/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/

foo
.bar
.baz()

Examples of correct code for this rule with the 2, { "MemberExpression": 1 } option:

/*eslint indent: ["error", 2, { "MemberExpression": 1 }]*/

foo
  .bar
  .baz();

// Any indentation is permitted in variable declarations and assignments.
var bip = aardvark.badger
                  .coyote;

FunctionDeclaration

Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/

function foo(bar,
  baz,
  qux) {
    qux();
}

Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionDeclaration": {"body": 1, "parameters": 2} }]*/

function foo(bar,
    baz,
    qux) {
  qux();
}

Examples of incorrect code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/

function foo(bar, baz,
  qux, boop) {
  qux();
}

Examples of correct code for this rule with the 2, { "FunctionDeclaration": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionDeclaration": {"parameters": "first"}}]*/

function foo(bar, baz,
             qux, boop) {
  qux();
}

FunctionExpression

Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/

var foo = function(bar,
  baz,
  qux) {
    qux();
}

Examples of correct code for this rule with the 2, { "FunctionExpression": {"body": 1, "parameters": 2} } option:

/*eslint indent: ["error", 2, { "FunctionExpression": {"body": 1, "parameters": 2} }]*/

var foo = function(bar,
    baz,
    qux) {
  qux();
}

Examples of incorrect code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/

var foo = function(bar, baz,
  qux, boop) {
  qux();
}

Examples of correct code for this rule with the 2, { "FunctionExpression": {"parameters": "first"} } option:

/*eslint indent: ["error", 2, {"FunctionExpression": {"parameters": "first"}}]*/

var foo = function(bar, baz,
                   qux, boop) {
  qux();
}

CallExpression

Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": 1} } option:

/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/

foo(bar,
    baz,
      qux
);

Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": 1} } option:

/*eslint indent: ["error", 2, { "CallExpression": {"arguments": 1} }]*/

foo(bar,
  baz,
  qux
);

Examples of incorrect code for this rule with the 2, { "CallExpression": {"arguments": "first"} } option:

/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/

foo(bar, baz,
  baz, boop, beep);

Examples of correct code for this rule with the 2, { "CallExpression": {"arguments": "first"} } option:

/*eslint indent: ["error", 2, {"CallExpression": {"arguments": "first"}}]*/

foo(bar, baz,
    baz, boop, beep);

ArrayExpression

Examples of incorrect code for this rule with the 2, { "ArrayExpression": 1 } option:

/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/

var foo = [
    bar,
baz,
      qux
];

Examples of correct code for this rule with the 2, { "ArrayExpression": 1 } option:

/*eslint indent: ["error", 2, { "ArrayExpression": 1 }]*/

var foo = [
  bar,
  baz,
  qux
];

Examples of incorrect code for this rule with the 2, { "ArrayExpression": "first" } option:

/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/

var foo = [bar,
  baz,
  qux
];

Examples of correct code for this rule with the 2, { "ArrayExpression": "first" } option:

/*eslint indent: ["error", 2, {"ArrayExpression": "first"}]*/

var foo = [bar,
           baz,
           qux
];

ObjectExpression

Examples of incorrect code for this rule with the 2, { "ObjectExpression": 1 } option:

/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/

var foo = {
    bar: 1,
baz: 2,
      qux: 3
};

Examples of correct code for this rule with the 2, { "ObjectExpression": 1 } option:

/*eslint indent: ["error", 2, { "ObjectExpression": 1 }]*/

var foo = {
  bar: 1,
  baz: 2,
  qux: 3
};

Examples of incorrect code for this rule with the 2, { "ObjectExpression": "first" } option:

/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/

var foo = { bar: 1,
  baz: 2 };

Examples of correct code for this rule with the 2, { "ObjectExpression": "first" } option:

/*eslint indent: ["error", 2, {"ObjectExpression": "first"}]*/

var foo = { bar: 1,
            baz: 2 };

Compatibility

• JSHint: indent
• JSCS: validateIndentation Source: http://eslint.org/docs/rules/

        },1000);

Close

Enforces spacing around commas (comma-spacing)

Spacing around commas improve readability of a list of items. Although most of the style guidelines for languages prescribe adding a space after a comma and not before it, it is subjective to the preferences of a project.

var foo = 1, bar = 2;
var foo = 1 ,bar = 2;

Rule Details

This rule enforces consistent spacing before and after commas in variable declarations, array literals, object literals, function parameters, and sequences.

This rule does not apply in an ArrayExpression or ArrayPattern in either of the following cases:

• adjacent null elements
• an initial null element, to avoid conflicts with the [array-bracket-spacing](array-bracket-spacing.md) rule

Options

This rule has an object option:

• "before": false (default) disallows spaces before commas
• "before": true requires one or more spaces before commas
• "after": true (default) requires one or more spaces after commas
• "after": false disallows spaces after commas

after

Examples of incorrect code for this rule with the default { "before": false, "after": true } options:

/*eslint comma-spacing: ["error", { "before": false, "after": true }]*/

var foo = 1 ,bar = 2;
var arr = [1 , 2];
var obj = {"foo": "bar" ,"baz": "qur"};
foo(a ,b);
new Foo(a ,b);
function foo(a ,b){}
a ,b

Examples of correct code for this rule with the default { "before": false, "after": true } options:

/*eslint comma-spacing: ["error", { "before": false, "after": true }]*/

var foo = 1, bar = 2
    , baz = 3;
var arr = [1, 2];
var arr = [1,, 3]
var obj = {"foo": "bar", "baz": "qur"};
foo(a, b);
new Foo(a, b);
function foo(a, b){}
a, b

Example of correct code for this rule with initial null element for the default { "before": false, "after": true } options:

/*eslint comma-spacing: ["error", { "before": false, "after": true }]*/
/*eslint array-bracket-spacing: ["error", "always"]*/

var arr = [ , 2, 3 ]

before

Examples of incorrect code for this rule with the { "before": true, "after": false } options:

/*eslint comma-spacing: ["error", { "before": true, "after": false }]*/

var foo = 1, bar = 2;
var arr = [1 , 2];
var obj = {"foo": "bar", "baz": "qur"};
new Foo(a,b);
function foo(a,b){}
a, b

Examples of correct code for this rule with the { "before": true, "after": false } options:

/*eslint comma-spacing: ["error", { "before": true, "after": false }]*/

var foo = 1 ,bar = 2 ,
    baz = true;
var arr = [1 ,2];
var arr = [1 ,,3]
var obj = {"foo": "bar" ,"baz": "qur"};
foo(a ,b);
new Foo(a ,b);
function foo(a ,b){}
a ,b

Examples of correct code for this rule with initial null element for the { "before": true, "after": false } options:

/*eslint comma-spacing: ["error", { "before": true, "after": false }]*/
/*eslint array-bracket-spacing: ["error", "never"]*/

var arr = [,2 ,3]

When Not To Use It

If your project will not be following a consistent comma-spacing pattern, turn this rule off.

Further Reading

• Javascript
• Dojo Style Guide

Related Rules

• [array-bracket-spacing](array-bracket-spacing.md)
• [comma-style](comma-style.md)
• [space-in-brackets](space-in-brackets.md) (deprecated)
• [space-in-parens](space-in-parens.md)
• [space-infix-ops](space-infix-ops.md)
• [space-after-keywords](space-after-keywords)
• [space-unary-ops](space-unary-ops)
• [space-return-throw-case](space-return-throw-case) Source: http://eslint.org/docs/rules/

}

Close

require or disallow padding within blocks (padded-blocks)

Some style guides require block statements to start and end with blank lines. The goal is to improve readability by visually separating the block content and the surrounding code.

if (a) {

    b();

}

Since it's good to have a consistent code style, you should either always write padded blocks or never do it.

Rule Details

This rule enforces consistent empty line padding within blocks.

Options

This rule has one option, which can be a string option or an object option.

String option:

• "always" (default) requires empty lines at the beginning and ending of block statements (except switch statements and classes)
• "never" disallows empty lines at the beginning and ending of block statements (except switch statements and classes)

Object option:

• "blocks" require or disallow padding within block statements
• "classes" require or disallow padding within classes
• "switches" require or disallow padding within switch statements

always

Examples of incorrect code for this rule with the default "always" option:

/*eslint padded-blocks: ["error", "always"]*/

if (a) {
    b();
}

if (a) { b(); }

if (a)
{
    b();
}

if (a) {

    b();
}

if (a) {
    b();

}

if (a) {
    // comment
    b();

}

Examples of correct code for this rule with the default "always" option:

/*eslint padded-blocks: ["error", "always"]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    // comment
    b();

}

never

Examples of incorrect code for this rule with the "never" option:

/*eslint padded-blocks: ["error", "never"]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    b();
}

if (a) {
    b();

}

Examples of correct code for this rule with the "never" option:

/*eslint padded-blocks: ["error", "never"]*/

if (a) {
    b();
}

if (a)
{
    b();
}

blocks

Examples of incorrect code for this rule with the { "blocks": "always" } option:

/*eslint padded-blocks: ["error", { "blocks": "always" }]*/

if (a) {
    b();
}

if (a) { b(); }

if (a)
{
    b();
}

if (a) {

    b();
}

if (a) {
    b();

}

if (a) {
    // comment
    b();

}

Examples of correct code for this rule with the { "blocks": "always" } option:

/*eslint padded-blocks: ["error", { "blocks": "always" }]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    // comment
    b();

}

Examples of incorrect code for this rule with the { "blocks": "never" } option:

/*eslint padded-blocks: ["error", { "blocks": "never" }]*/

if (a) {

    b();

}

if (a)
{

    b();

}

if (a) {

    b();
}

if (a) {
    b();

}

Examples of correct code for this rule with the { "blocks": "never" } option:

/*eslint padded-blocks: ["error", { "blocks": "never" }]*/

if (a) {
    b();
}

if (a)
{
    b();
}

classes

Examples of incorrect code for this rule with the { "classes": "always" } option:

/*eslint padded-blocks: ["error", { "classes": "always" }]*/

class  A {
    constructor(){
    }
}

Examples of correct code for this rule with the { "classes": "always" } option:

/*eslint padded-blocks: ["error", { "classes": "always" }]*/

class  A {

    constructor(){
    }

}

Examples of incorrect code for this rule with the { "classes": "never" } option:

/*eslint padded-blocks: ["error", { "classes": "never" }]*/

class  A {

    constructor(){
    }

}

Examples of correct code for this rule with the { "classes": "never" } option:

/*eslint padded-blocks: ["error", { "classes": "never" }]*/

class  A {
    constructor(){
    }
}

switches

Examples of incorrect code for this rule with the { "switches": "always" } option:

/*eslint padded-blocks: ["error", { "switches": "always" }]*/

switch (a) {
    case 0: foo();
}

Examples of correct code for this rule with the { "switches": "always" } option:

/*eslint padded-blocks: ["error", { "switches": "always" }]*/

switch (a) {

    case 0: foo();

}

if (a) {
    b();
}

Examples of incorrect code for this rule with the { "switches": "never" } option:

/*eslint padded-blocks: ["error", { "switches": "never" }]*/

switch (a) {

    case 0: foo();

}

Examples of correct code for this rule with the { "switches": "never" } option:

/*eslint padded-blocks: ["error", { "switches": "never" }]*/

switch (a) {
    case 0: foo();
}

if (a) {

    b();

}

When Not To Use It

You can turn this rule off if you are not concerned with the consistency of padding within blocks. Source: http://eslint.org/docs/rules/

const database = require('../../database.js');

Close

Disallow Unused Variables (no-unused-vars)

Variables that are declared and not used anywhere in the code are most likely an error due to incomplete refactoring. Such variables take up space in the code and can lead to confusion by readers.

Rule Details

This rule is aimed at eliminating unused variables, functions, and parameters of functions.

A variable is considered to be used if any of the following are true:

• It represents a function that is called (doSomething())
• It is read (var y = x)
• It is passed into a function as an argument (doSomething(x))
• It is read inside of a function that is passed to another function (doSomething(function() { foo(); }))

A variable is not considered to be used if it is only ever assigned to (var x = 5) or declared.

Examples of incorrect code for this rule:

/*eslint no-unused-vars: "error"*/
/*global some_unused_var*/

// It checks variables you have defined as global
some_unused_var = 42;

var x;

// Write-only variables are not considered as used.
var y = 10;
y = 5;

// A read for a modification of itself is not considered as used.
var z = 0;
z = z + 1;

// By default, unused arguments cause warnings.
(function(foo) {
    return 5;
})();

// Unused recursive functions also cause warnings.
function fact(n) {
    if (n < 2) return 1;
    return n * fact(n - 1);
}

// When a function definition destructures an array, unused entries from the array also cause warnings.
function getY([x, y]) {
    return y;
}

Examples of correct code for this rule:

/*eslint no-unused-vars: "error"*/

var x = 10;
alert(x);

// foo is considered used here
myFunc(function foo() {
    // ...
}.bind(this));

(function(foo) {
    return foo;
})();

var myFunc;
myFunc = setTimeout(function() {
    // myFunc is considered used
    myFunc();
}, 50);

// Only the second argument from the descructured array is used.
function getY([, y]) {
    return y;
}

exported

In environments outside of CommonJS or ECMAScript modules, you may use var to create a global variable that may be used by other scripts. You can use the /* exported variableName */ comment block to indicate that this variable is being exported and therefore should not be considered unused.

Note that /* exported */ has no effect for any of the following:

• when the environment is node or commonjs
• when parserOptions.sourceType is module
• when ecmaFeatures.globalReturn is true

The line comment // exported variableName will not work as exported is not line-specific.

Examples of correct code for /* exported variableName */ operation:

/* exported global_var */

var global_var = 42;

Options

This rule takes one argument which can be a string or an object. The string settings are the same as those of the vars property (explained below).

By default this rule is enabled with all option for variables and after-used for arguments.

{
    "rules": {
        "no-unused-vars": ["error", { "vars": "all", "args": "after-used", "ignoreRestSiblings": false }]
    }
}

vars

The vars option has two settings:

• all checks all variables for usage, including those in the global scope. This is the default setting.
• local checks only that locally-declared variables are used but will allow global variables to be unused.

vars: local

Examples of correct code for the { "vars": "local" } option:

/*eslint no-unused-vars: ["error", { "vars": "local" }]*/
/*global some_unused_var */

some_unused_var = 42;

varsIgnorePattern

The varsIgnorePattern option specifies exceptions not to check for usage: variables whose names match a regexp pattern. For example, variables whose names contain ignored or Ignored.

Examples of correct code for the { "varsIgnorePattern": "[iI]gnored" } option:

/*eslint no-unused-vars: ["error", { "varsIgnorePattern": "[iI]gnored" }]*/

var firstVarIgnored = 1;
var secondVar = 2;
console.log(secondVar);

args

The args option has three settings:

• after-used - only the last argument must be used. This allows you, for instance, to have two named parameters to a function and as long as you use the second argument, ESLint will not warn you about the first. This is the default setting.
• all - all named arguments must be used.
• none - do not check arguments.

args: after-used

Examples of incorrect code for the default { "args": "after-used" } option:

/*eslint no-unused-vars: ["error", { "args": "after-used" }]*/

// 1 error
// "baz" is defined but never used
(function(foo, bar, baz) {
    return bar;
})();

Examples of correct code for the default { "args": "after-used" } option:

/*eslint no-unused-vars: ["error", {"args": "after-used"}]*/

(function(foo, bar, baz) {
    return baz;
})();

args: all

Examples of incorrect code for the { "args": "all" } option:

/*eslint no-unused-vars: ["error", { "args": "all" }]*/

// 2 errors
// "foo" is defined but never used
// "baz" is defined but never used
(function(foo, bar, baz) {
    return bar;
})();

args: none

Examples of correct code for the { "args": "none" } option:

/*eslint no-unused-vars: ["error", { "args": "none" }]*/

(function(foo, bar, baz) {
    return bar;
})();

ignoreRestSiblings

The ignoreRestSiblings option is a boolean (default: false). Using a Rest Property it is possible to "omit" properties from an object, but by default the sibling properties are marked as "unused". With this option enabled the rest property's siblings are ignored.

Examples of correct code for the { "ignoreRestSiblings": true } option:

/*eslint no-unused-vars: ["error", { "ignoreRestSiblings": true }]*/
// 'type' is ignored because it has a rest property sibling.
var { type, ...coords } = data;

argsIgnorePattern

The argsIgnorePattern option specifies exceptions not to check for usage: arguments whose names match a regexp pattern. For example, variables whose names begin with an underscore.

Examples of correct code for the { "argsIgnorePattern": "^_" } option:

/*eslint no-unused-vars: ["error", { "argsIgnorePattern": "^_" }]*/

function foo(x, _y) {
    return x + 1;
}
foo();

caughtErrors

The caughtErrors option is used for catch block arguments validation.

It has two settings:

• none - do not check error objects. This is the default setting.
• all - all named arguments must be used.

caughtErrors: none

Not specifying this rule is equivalent of assigning it to none.

Examples of correct code for the { "caughtErrors": "none" } option:

/*eslint no-unused-vars: ["error", { "caughtErrors": "none" }]*/

try {
    //...
} catch (err) {
    console.error("errors");
}

caughtErrors: all

Examples of incorrect code for the { "caughtErrors": "all" } option:

/*eslint no-unused-vars: ["error", { "caughtErrors": "all" }]*/

// 1 error
// "err" is defined but never used
try {
    //...
} catch (err) {
    console.error("errors");
}

caughtErrorsIgnorePattern

The caughtErrorsIgnorePattern option specifies exceptions not to check for usage: catch arguments whose names match a regexp pattern. For example, variables whose names begin with a string 'ignore'.

Examples of correct code for the { "caughtErrorsIgnorePattern": "^ignore" } option:

/*eslint no-unused-vars: ["error", { "caughtErrorsIgnorePattern": "^ignore" }]*/

try {
    //...
} catch (ignoreErr) {
    console.error("errors");
}

When Not To Use It

If you don't want to be notified about unused variables or function arguments, you can safely turn this rule off. Source: http://eslint.org/docs/rules/

                 write_to_file.on('error',function(err)

Close

Suggest using arrow functions as callbacks. (prefer-arrow-callback)

Arrow functions are suited to callbacks, because:

• this keywords in arrow functions bind to the upper scope's.
• The notation of the arrow function is shorter than function expression's.

Rule Details

This rule is aimed to flag usage of function expressions in an argument list.

The following patterns are considered problems:

/*eslint prefer-arrow-callback: "error"*/

foo(function(a) { return a; });
foo(function() { return this.a; }.bind(this));

The following patterns are not considered problems:

/*eslint prefer-arrow-callback: "error"*/
/*eslint-env es6*/

foo(a => a);
foo(function*() { yield; });

// this is not a callback.
var foo = function foo(a) { return a; };

// using `this` without `.bind(this)`.
foo(function() { return this.a; });

// recursively.
foo(function bar(n) { return n && n + bar(n - 1); });

Options

This rule takes one optional argument, an object which is an options object.

allowNamedFunctions

This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

Examples of correct code for the { "allowNamedFunctions": true } option:

/*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/

foo(function bar() {});

allowUnboundThis

This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

Examples of incorrect code for the { "allowUnboundThis": false } option:

/*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
/*eslint-env es6*/

foo(function() { this.a; });

foo(function() { (() => this); });

someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

When Not To Use It

This rule should not be used in ES3/5 environments.

In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

        delete socket.handshake.session.key

Close

Disallow Reassignment of Function Parameters (no-param-reassign)

Assignment to variables declared as function parameters can be misleading and lead to confusing behavior, as modifying function parameters will also mutate the arguments object. Often, assignment to function parameters is unintended and indicative of a mistake or programmer error.

This rule can be also configured to fail when function parameters are modified. Side effects on parameters can cause counter-intuitive execution flow and make errors difficult to track down.

Rule Details

This rule aims to prevent unintended behavior caused by modification or reassignment of function parameters.

Examples of incorrect code for this rule:

/*eslint no-param-reassign: "error"*/

function foo(bar) {
    bar = 13;
}

function foo(bar) {
    bar++;
}

Examples of correct code for this rule:

/*eslint no-param-reassign: "error"*/

function foo(bar) {
    var baz = bar;
}

Options

This rule takes one option, an object, with a boolean property "props" and an array "ignorePropertyModificationsFor". "props" is false by default. If "props" is set to true, this rule warns against the modification of parameter properties unless they're included in "ignorePropertyModificationsFor", which is an empty array by default.

props

Examples of correct code for the default { "props": false } option:

/*eslint no-param-reassign: ["error", { "props": false }]*/

function foo(bar) {
    bar.prop = "value";
}

function foo(bar) {
    delete bar.aaa;
}

function foo(bar) {
    bar.aaa++;
}

Examples of incorrect code for the { "props": true } option:

/*eslint no-param-reassign: ["error", { "props": true }]*/

function foo(bar) {
    bar.prop = "value";
}

function foo(bar) {
    delete bar.aaa;
}

function foo(bar) {
    bar.aaa++;
}

Examples of correct code for the { "props": true } option with "ignorePropertyModificationsFor" set:

/*eslint no-param-reassign: ["error", { "props": true, "ignorePropertyModificationsFor": ["bar"] }]*/

function foo(bar) {
    bar.prop = "value";
}

function foo(bar) {
    delete bar.aaa;
}

function foo(bar) {
    bar.aaa++;
}

When Not To Use It

If you want to allow assignment to function parameters, then you can safely disable this rule.

Further Reading

• JavaScript: Don’t Reassign Your Function Arguments Source: http://eslint.org/docs/rules/