Method has too many lines. [48/10] Open
def build_formula_mappings(options = {})
default_options = { activity: true, package: true, payment: true, zone: true, missing_only: false }
options = default_options.merge(options)
mappings = []
project = current_project(project_scope: :fully_loaded)
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method build_formula_mappings
has a Cognitive Complexity of 38 (exceeds 5 allowed). Consider refactoring. Open
def build_formula_mappings(options = {})
default_options = { activity: true, package: true, payment: true, zone: true, missing_only: false }
options = default_options.merge(options)
mappings = []
project = current_project(project_scope: :fully_loaded)
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Cyclomatic complexity for build_formula_mappings is too high. [13/6] Open
def build_formula_mappings(options = {})
default_options = { activity: true, package: true, payment: true, zone: true, missing_only: false }
options = default_options.merge(options)
mappings = []
project = current_project(project_scope: :fully_loaded)
- Read upRead up
- Exclude checks
This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.
An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.
Perceived complexity for build_formula_mappings is too high. [13/7] Open
def build_formula_mappings(options = {})
default_options = { activity: true, package: true, payment: true, zone: true, missing_only: false }
options = default_options.merge(options)
mappings = []
project = current_project(project_scope: :fully_loaded)
- Read upRead up
- Exclude checks
This cop tries to produce a complexity score that's a measure of the
complexity the reader experiences when looking at a method. For that
reason it considers when
nodes as something that doesn't add as much
complexity as an if
or a &&
. Except if it's one of those special
case
/when
constructs where there's no expression after case
. Then
the cop treats it as an if
/elsif
/elsif
... and lets all the when
nodes count. In contrast to the CyclomaticComplexity cop, this cop
considers else
nodes as adding complexity.
Example:
def my_method # 1
if cond # 1
case var # 2 (0.8 + 4 * 0.2, rounded)
when 1 then func_one
when 2 then func_two
when 3 then func_three
when 4..10 then func_other
end
else # 1
do_something until a && b # 2
end # ===
end # 7 complexity points
Method has too many lines. [15/10] Open
def create_data_element
activity = current_project.activities.find(params[:activity_id]) if params[:activity_id]
formula = Formula.find(params[:formula_id])
raise "invalid formula id" if formula.project_id != current_project.id
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method has too many lines. [13/10] Open
def check_problems
project = current_project(project_scope: :fully_loaded)
in_references = project.activities.flat_map(&:activity_states).map(&:external_reference)
out_references = project.formula_mappings.map(&:external_reference)
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method build_formula_mappings
has 48 lines of code (exceeds 25 allowed). Consider refactoring. Open
def build_formula_mappings(options = {})
default_options = { activity: true, package: true, payment: true, zone: true, missing_only: false }
options = default_options.merge(options)
mappings = []
project = current_project(project_scope: :fully_loaded)
Line is too long. [116/100] Open
@problems += project.formula_mappings.group_by(&:external_reference).select { |_k, v| v.size > 1 }.map do |k, v|
- Exclude checks
Align the elements of a hash literal if they span more than one line. Open
"kind" => params[:kind],
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Line is too long. [133/100] Open
mapping.external_reference = external_reference(mapping_by_key[[formula.id, activity.id]]) unless mapping_by_key.empty?
- Exclude checks
Line is too long. [108/100] Open
mappings = mappings.flatten.compact.select { |mapping| mapping.formula.code == params[:formula_code] }
- Exclude checks
Shadowing outer local variable - as
. Open
as = project.activities.flat_map(&:activity_states).select { |as| as.external_reference == bad_reference }.first
- Read upRead up
- Exclude checks
This cop looks for use of the same name as outer local variables
for block arguments or block local variables.
This is a mimic of the warning
"shadowing outer local variable - foo" from ruby -cw
.
Example:
# bad
def some_method
foo = 1
2.times do |foo| # shadowing outer `foo`
do_something(foo)
end
end
Example:
# good
def some_method
foo = 1
2.times do |bar|
do_something(bar)
end
end
Align the elements of a hash literal if they span more than one line. Open
"name" => params[:name],
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
"code" => params[:code]
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Line is too long. [118/100] Open
as = project.activities.flat_map(&:activity_states).select { |as| as.external_reference == bad_reference }.first
- Exclude checks
Line is too long. [158/100] Open
mapping_by_key = params[:formula_mappings] ? params[:formula_mappings].index_by { |mapping| [mapping[:formula_id].to_i, mapping[:activity_id].to_i] } : {}
- Exclude checks
Use nested module/class definitions instead of compact style. Open
class Setup::FormulaMappingsController < PrivateController
- Read upRead up
- Exclude checks
This cop checks the style of children definitions at classes and modules. Basically there are two different styles:
Example: EnforcedStyle: nested (default)
# good
# have each child on its own line
class Foo
class Bar
end
end
Example: EnforcedStyle: compact
# good
# combine definitions as much as possible
class Foo::Bar
end
The compact style is only forced for classes/modules with one child.
Shadowing outer local variable - fm
. Open
fm = project.formula_mappings.select { |fm| fm.external_reference == bad_reference }.first
- Read upRead up
- Exclude checks
This cop looks for use of the same name as outer local variables
for block arguments or block local variables.
This is a mimic of the warning
"shadowing outer local variable - foo" from ruby -cw
.
Example:
# bad
def some_method
foo = 1
2.times do |foo| # shadowing outer `foo`
do_something(foo)
end
end
Example:
# good
def some_method
foo = 1
2.times do |bar|
do_something(bar)
end
end
Line is too long. [111/100] Open
[bad_reference, "MAPPED IN AND OUT", as.activity.name, as.state.name, fm.formula.code, fm.activity&.name]
- Exclude checks
Line is too long. [108/100] Open
[k, "MAPPED OUT MULTIPLE TIMES", v.map { |fm| [fm.kind, fm.activity&.name, fm.formula.code] }].flatten
- Exclude checks
Line is too long. [103/100] Open
default_options = { activity: true, package: true, payment: true, zone: true, missing_only: false }
- Exclude checks
Line is too long. [101/100] Open
.select { |a| params[:activity_code].presence ? a.code == params[:activity_code] : true }
- Exclude checks
Align the elements of a hash literal if they span more than one line. Open
"activity_id" => activity&.id,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
"formula_id" => formula.id,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
kind: rule.kind
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Line is too long. [119/100] Open
mapping.external_reference = external_reference(mapping_by_key[[formula.id, 0]]) unless mapping_by_key.empty?
- Exclude checks