Method has too many lines. [13/10] Open
def new_meta_activity_state(activity_state, activity_package)
name = activity_state.state.names(
project.naming_patterns, activity_state.activity
)
Meta::Metadata.new(
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method has too many lines. [11/10] Open
def new_meta_formula_mapping(formula_mapping, package)
name = formula_mapping.names
Meta::Metadata.new(
dhis2_props(formula_mapping.external_reference).merge(
formula_mapping: formula_mapping,
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method has too many lines. [11/10] Open
def new_meta_payment_mapping(formula_mapping, payment_rule)
name = formula_mapping.names
Meta::Metadata.new(
dhis2_props(formula_mapping.external_reference).merge(
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Similar blocks of code found in 2 locations. Consider refactoring. Open
def new_meta_formula_mapping(formula_mapping, package)
name = formula_mapping.names
Meta::Metadata.new(
dhis2_props(formula_mapping.external_reference).merge(
formula_mapping: formula_mapping,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 28.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def new_meta_payment_mapping(formula_mapping, payment_rule)
name = formula_mapping.names
Meta::Metadata.new(
dhis2_props(formula_mapping.external_reference).merge(
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 28.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Align the elements of a hash literal if they span more than one line. Open
dhis2_id: data_element_id,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_type: "Payment mapping",
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
package: activity_package.package,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
dhis2_code: data_element&.code,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
activity_state: activity_state,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
payment_rule: payment_rule,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
package: package,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_name: name.long,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_type: "Formula mapping",
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_code: name.code
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_type: "Activity state",
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_code: name.code,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_name: name.long,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Missing magic comment # frozen_string_literal: true
. Open
module Meta
- Read upRead up
- Exclude checks
This cop is designed to help upgrade to after Ruby 3.0. It will add the
comment # frozen_string_literal: true
to the top of files to
enable frozen string literals. Frozen string literals may be default
after Ruby 3.0. The comment will be added below a shebang and encoding
comment. The frozen string literal comment is only valid in Ruby 2.3+.
Example: EnforcedStyle: always (default)
# The `always` style will always add the frozen string literal comment
# to a file, regardless of the Ruby version or if `freeze` or `<<` are
# called on a string literal.
# bad
module Bar
# ...
end
# good
# frozen_string_literal: true
module Bar
# ...
end
Example: EnforcedStyle: never
# The `never` will enforce that the frozen string literal comment does
# not exist in a file.
# bad
# frozen_string_literal: true
module Baz
# ...
end
# good
module Baz
# ...
end
Align the elements of a hash literal if they span more than one line. Open
dhis2_name: data_element&.name,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_name: name.long,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
orbf_code: name.code,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})