Method has too many lines. [34/10] Open
def create_data_element_group(package, data_element_ids)
created_deg = nil
begin
deg_code = "hesabu-#{package.id}"
deg_name = "ORBF - #{package.id} - #{package.name}"
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method create_data_element_group
has 34 lines of code (exceeds 25 allowed). Consider refactoring. Open
def create_data_element_group(package, data_element_ids)
created_deg = nil
begin
deg_code = "hesabu-#{package.id}"
deg_name = "ORBF - #{package.id} - #{package.name}"
Do not write to stdout. Use Rails's logger if you want to log. Open
puts "**************************************** #{deg_id}"
- Read upRead up
- Exclude checks
This cop checks for the use of output calls like puts and print
Example:
# bad
puts 'A debug message'
pp 'A debug message'
print 'A debug message'
# good
Rails.logger.debug 'A debug message'
Do not write to stdout. Use Rails's logger if you want to log. Open
puts deg.to_json
- Read upRead up
- Exclude checks
This cop checks for the use of output calls like puts and print
Example:
# bad
puts 'A debug message'
pp 'A debug message'
print 'A debug message'
# good
Rails.logger.debug 'A debug message'
Identical blocks of code found in 2 locations. Consider refactoring. Open
rescue RestClient::Exception => e
puts deg.to_json
Rails.logger.warn("failed create_data_element_group " + e.message + "\n" +
e&.response&.body + "\n" + +e&.response&.request&.payload.inspect)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 33.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Use nested module/class definitions instead of compact style. Open
class Synchros::V2::DataElementGroups < Synchros::Base
- Read upRead up
- Exclude checks
This cop checks the style of children definitions at classes and modules. Basically there are two different styles:
Example: EnforcedStyle: nested (default)
# good
# have each child on its own line
class Foo
class Bar
end
end
Example: EnforcedStyle: compact
# good
# combine definitions as much as possible
class Foo::Bar
end
The compact style is only forced for classes/modules with one child.
Align the elements of a hash literal if they span more than one line. Open
name: deg_name,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
short_name: deg_code,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Align the elements of a hash literal if they span more than one line. Open
code: deg_code,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Line is too long. [116/100] Open
@indicators ||= package.project.dhis2_connection.indicators.list(fields: "id,name,numerator", page_size: 50_000)
- Exclude checks
Line is too long. [104/100] Open
raise "data element group not created #{deg_name} : #{deg} : #{status.inspect}" unless created_deg
- Exclude checks
Align the elements of a hash literal if they span more than one line. Open
display_name: deg_name,
- Read upRead up
- Exclude checks
Check that the keys, separators, and values of a multi-line hash literal are aligned according to configuration. The configuration options are:
- key (left align keys, one space before hash rockets and values)
- separator (align hash rockets and colons, right align keys)
- table (left align keys, hash rockets, and values)
The treatment of hashes passed as the last argument to a method call can also be configured. The options are:
- always_inspect
- always_ignore
- ignore_implicit (without curly braces)
Alternatively you can specify multiple allowed styles. That's done by passing a list of styles to EnforcedStyles.
Example: EnforcedHashRocketStyle: key (default)
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: separator
# bad
{
:foo => bar,
:ba => baz
}
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedHashRocketStyle: table
# bad
{
:foo => bar,
:ba => baz
}
# good
{
:foo => bar,
:ba => baz
}
Example: EnforcedColonStyle: key (default)
# bad
{
foo: bar,
ba: baz
}
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: separator
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedColonStyle: table
# bad
{
foo: bar,
ba: baz
}
# good
{
foo: bar,
ba: baz
}
Example: EnforcedLastArgumentHashStyle: always_inspect (default)
# Inspect both implicit and explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
# good
do_something(
foo: 1,
bar: 2
)
# good
do_something({foo: 1,
bar: 2})
# good
do_something({
foo: 1,
bar: 2
})
Example: EnforcedLastArgumentHashStyle: always_ignore
# Ignore both implicit and explicit hashes.
# good
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Example: EnforcedLastArgumentHashStyle: ignore_implicit
# Ignore only implicit hashes.
# bad
do_something({foo: 1,
bar: 2})
# good
do_something(foo: 1,
bar: 2)
Example: EnforcedLastArgumentHashStyle: ignore_explicit
# Ignore only explicit hashes.
# bad
do_something(foo: 1,
bar: 2)
# good
do_something({foo: 1,
bar: 2})
Line is too long. [120/100] Open
Rails.logger.info "********** Synchronizing #{package.name} (#{package.id}) - activities #{package.activities.size}"
- Exclude checks