Sign upLogin

BlueBrain/BluePyOpt

View on GitHub
Star

Showing 415 of 415 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in examples/stochkv/stochkv3cell.py and 1 other location - About 1 wk to fix
examples/stochkv/stochkvcell.py on lines 0..173

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 963.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in examples/stochkv/stochkvcell.py and 1 other location - About 1 wk to fix
examples/stochkv/stochkv3cell.py on lines 0..173

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 963.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File versioneer.py has 1416 lines of code (exceeds 250 allowed). Consider refactoring.
Open

# Version: 0.18

"""The Versioneer - like a rocketeer, but for versions.

The Versioneer
Severity: Major
Found in versioneer.py - About 3 days to fix

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

    def render(pieces, style):
    """Render the given version pieces into the requested style."""
    if pieces["error"]:
        return {
            "version": "unknown",
    Severity: Major
    Found in versioneer.py and 1 other location - About 2 days to fix
    bluepyopt/_version.py on lines 462..493

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 257.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

    def render(pieces, style):
    """Render the given version pieces into the requested style."""
    if pieces["error"]:
        return {"version": "unknown",
                "full-revisionid": pieces.get("long"),
    Severity: Major
    Found in bluepyopt/_version.py and 1 other location - About 2 days to fix
    versioneer.py on lines 1445..1481

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 257.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    Severity: Major
    Found in examples/l5pc/generate_acc.py and 1 other location - About 1 day to fix
    examples/simplecell/generate_acc.py on lines 0..61

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 212.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    Severity: Major
    Found in examples/simplecell/generate_acc.py and 1 other location - About 1 day to fix
    examples/l5pc/generate_acc.py on lines 0..61

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 212.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    File create_acc.py has 772 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    """create JSON/ACC files for Arbor from a set of BluePyOpt.ephys parameters"""

# pylint: disable=R0914

import io
    Severity: Major
    Found in bluepyopt/ephys/create_acc.py - About 1 day to fix

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

      @register_vcs_handler("git", "get_keywords")
def git_get_keywords(versionfile_abs):
    """Extract version information from the given file."""
    # the code embedded in _version.py can just fetch the value of these
    # keywords. When used from setup.py, we don't want to import _version.py,
      Severity: Major
      Found in bluepyopt/_version.py and 1 other location - About 1 day to fix
      versioneer.py on lines 973..999

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 200.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Identical blocks of code found in 2 locations. Consider refactoring.
      Open

      @register_vcs_handler("git", "get_keywords")
def git_get_keywords(versionfile_abs):
    """Extract version information from the given file."""
    # the code embedded in _version.py can just fetch the value of these
    # keywords. When used from setup.py, we don't want to import _version.py,
      Severity: Major
      Found in versioneer.py and 1 other location - About 1 day to fix
      bluepyopt/_version.py on lines 132..158

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 200.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      File models.py has 685 lines of code (exceeds 250 allowed). Consider refactoring.
      Open

      """Cell template class"""

"""
Copyright (c) 2016-2020, EPFL/Blue Brain Project
      Severity: Major
      Found in bluepyopt/ephys/models.py - About 1 day to fix

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

        def render_pep440_post(pieces):
    """TAG[.postDISTANCE[.dev0]+gHEX] .

    The ".dev0" means dirty. Note that .dev0 sorts backwards
    (a dirty tree will appear "older" than the corresponding clean one),
        Severity: Major
        Found in versioneer.py and 1 other location - About 1 day to fix
        bluepyopt/_version.py on lines 373..397

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 174.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

        def render_pep440_post(pieces):
    """TAG[.postDISTANCE[.dev0]+gHEX] .

    The ".dev0" means dirty. Note that .dev0 sorts backwards
    (a dirty tree will appear "older" than the corresponding clean one),
        Severity: Major
        Found in bluepyopt/_version.py and 1 other location - About 1 day to fix
        versioneer.py on lines 1356..1380

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 174.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

        def render_pep440(pieces):
    """Build up version string, with post-release "local version identifier".

    Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you
    get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty
        Severity: Major
        Found in bluepyopt/_version.py and 1 other location - About 1 day to fix
        versioneer.py on lines 1300..1321

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 154.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

        def render_pep440(pieces):
    """Build up version string, with post-release "local version identifier".

    Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you
    get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty
        Severity: Major
        Found in versioneer.py and 1 other location - About 1 day to fix
        bluepyopt/_version.py on lines 315..337

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 154.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            for i in xrange(n_events):
        if C_amp[i] > param['theta_d']:
            t_d[i] = ca_event_delta[i]
        elif C_amp[i] <= param['theta_d'] < C_amp[i + n_events]:
            t_d[i] = param['tau_ca'] * \
        Severity: Major
        Found in examples/graupnerbrunelstdp/stdputil.py and 1 other location - About 1 day to fix
        examples/graupnerbrunelstdp/stdputil.py on lines 324..331

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 151.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

            for i in xrange(n_events):
        if C_amp[i] > param['theta_p']:
            t_p[i] = ca_event_delta[i]
        elif C_amp[i] <= param['theta_p'] < C_amp[i + n_events]:
            t_p[i] = param['tau_ca'] * \
        Severity: Major
        Found in examples/graupnerbrunelstdp/stdputil.py and 1 other location - About 1 day to fix
        examples/graupnerbrunelstdp/stdputil.py on lines 311..318

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 151.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

            def __str__(self):
        """Return string representation"""

        content = '%s:\n' % self.name
        Severity: Major
        Found in bluepyopt/ephys/models.py and 1 other location - About 1 day to fix
        bluepyopt/ephys/models.py on lines 871..891

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 147.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

            def __str__(self):
        """Return string representation"""

        content = "%s:\n" % self.name
        Severity: Major
        Found in bluepyopt/ephys/models.py and 1 other location - About 1 day to fix
        bluepyopt/ephys/models.py on lines 430..450

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 147.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Identical blocks of code found in 2 locations. Consider refactoring.
        Open

            def check_name(self):
        """Check if name complies with requirements"""

        allowed_chars = string.ascii_letters + string.digits + '_'
        Severity: Major
        Found in bluepyopt/ephys/models.py and 1 other location - About 1 day to fix
        bluepyopt/ephys/models.py on lines 654..674

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 143.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Severity
        Category
        Status
        Source
        Language