Showing 318 of 393 total issues
Method create
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
def create
manager = ClientTokenManager.new(@organization.dpc_api_organization_id)
if params_present? && manager.create_client_token(label: params[:label])
@client_token = manager.client_token
render(Page::ClientToken::ShowTokenComponent.new(@organization, @client_token))
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method deserializeMacaroon
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
public static List<Macaroon> deserializeMacaroon(String serializedString) {
if (serializedString.isEmpty()) {
throw new BakeryException("Cannot deserialize empty string");
}
// Determine if we're Base64 encoded or not
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method search
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
@SuppressWarnings("OptionalUsedAsFieldOrParameterType")
@GET
@FHIR
@Timed
@ExceptionMetered
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method fromPolicyUrl
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
public static PolicyType fromPolicyUrl(String url) {
if (url != null) {
for (PolicyType policyType : PolicyType.values()) {
if (policyType.policyUrl.equalsIgnoreCase(url)) {
return policyType;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
def get_public_keys(params)
@public_keys = if params.key?(:key_page)
Kaminari.paginate_array(@user.primary_organization.reg_org.public_keys).page(params[:key_page]).per(10)
else
Kaminari.paginate_array(@user.primary_organization.reg_org.public_keys).page(0).per(10)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 29.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def get_client_tokens(params)
@client_tokens = if params.key?(:token_page)
Kaminari.paginate_array(@user.primary_organization.reg_org.client_tokens).page(params[:token_page]).per(10)
else
Kaminari.paginate_array(@user.primary_organization.reg_org.client_tokens).page(0).per(10)
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 29.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
def uri_is_valid_format
parsed_uri = URI.parse(self[:uri])
errors.add :uri, 'must be valid URI present' if parsed_uri.host.nil?
rescue URI::InvalidURIError
errors.add :uri, 'must be valid URI (must have valid domain name)'
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
def uri_is_valid_format
parsed_uri = URI.parse(self[:uri])
errors.add :uri, 'must be valid URI present' if parsed_uri.host.nil?
rescue URI::InvalidURIError
errors.add :uri, 'must be valid URI (must have valid domain name)'
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 26.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
module OrganizationTypable
extend ActiveSupport::Concern
ORGANIZATION_TYPES = {
'primary_care_clinic' => 0,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
module OrganizationTypable
extend ActiveSupport::Concern
ORGANIZATION_TYPES = {
'primary_care_clinic' => 0,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 25.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Return an empty collection instead of null. Open
return null;
- Read upRead up
- Exclude checks
Returning null
instead of an actual array or collection forces callers of the method to explicitly test for nullity, making them more
complex and less readable.
Moreover, in many cases, null
is used as a synonym for empty.
Noncompliant Code Example
public static List<Result> getResults() { return null; // Noncompliant } public static Result[] getResults() { return null; // Noncompliant } public static void main(String[] args) { Result[] results = getResults(); if (results != null) { // Nullity test required to prevent NPE for (Result result: results) { /* ... */ } } }
Compliant Solution
public static List<Result> getResults() { return Collections.emptyList(); // Compliant } public static Result[] getResults() { return new Result[0]; } public static void main(String[] args) { for (Result result: getResults()) { /* ... */ } }
See
- CERT, MSC19-C. - For functions that return an array, prefer returning an empty array over a null value
- CERT, MET55-J. - Return an empty array or collection instead of a null value for methods that return an array or collection
Rename this constant name to match the regular expression '^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$'. Open
Patient,
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all constant names match a provided regular expression.
Noncompliant Code Example
With the default regular expression ^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$
:
public class MyClass { public static final int first = 1; } public enum MyEnum { first; }
Compliant Solution
public class MyClass { public static final int FIRST = 1; } public enum MyEnum { FIRST; }
Rename this constant name to match the regular expression '^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$'. Open
Coverage,
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all constant names match a provided regular expression.
Noncompliant Code Example
With the default regular expression ^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$
:
public class MyClass { public static final int first = 1; } public enum MyEnum { first; }
Compliant Solution
public class MyClass { public static final int FIRST = 1; } public enum MyEnum { FIRST; }
Merge this if statement with the enclosing one. Open
if (IBaseResource.class.isAssignableFrom(parameter.getRawType()))
- Read upRead up
- Exclude checks
Merging collapsible if
statements increases the code's readability.
Noncompliant Code Example
if (file != null) { if (file.isFile() || file.isDirectory()) { /* ... */ } }
Compliant Solution
if (file != null && isFileOrDirectory(file)) { /* ... */ } private static boolean isFileOrDirectory(File file) { return file.isFile() || file.isDirectory(); }
Rename this constant name to match the regular expression '^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$'. Open
Bundle,
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all constant names match a provided regular expression.
Noncompliant Code Example
With the default regular expression ^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$
:
public class MyClass { public static final int first = 1; } public enum MyEnum { first; }
Compliant Solution
public class MyClass { public static final int FIRST = 1; } public enum MyEnum { FIRST; }
Rename this constant name to match the regular expression '^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$'. Open
OperationOutcome,
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all constant names match a provided regular expression.
Noncompliant Code Example
With the default regular expression ^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$
:
public class MyClass { public static final int first = 1; } public enum MyEnum { first; }
Compliant Solution
public class MyClass { public static final int FIRST = 1; } public enum MyEnum { FIRST; }
Remove this unused method parameter "payload". Open
public Macaroon discharge(MacaroonCaveat caveat, byte[] payload) {
- Read upRead up
- Exclude checks
Unused parameters are misleading. Whatever the values passed to such parameters, the behavior will be the same.
Noncompliant Code Example
void doSomething(int a, int b) { // "b" is unused compute(a); }
Compliant Solution
void doSomething(int a) { compute(a); }
Exceptions
The rule will not raise issues for unused parameters:
- that are annotated with
@javax.enterprise.event.Observes
- in overrides and implementation methods
- in interface
default
methods - in non-private methods that only
throw
or that have empty bodies - in annotated methods, unless the annotation is
@SuppressWarning("unchecked")
or@SuppressWarning("rawtypes")
, in which case the annotation will be ignored - in overridable methods (non-final, or not member of a final class, non-static, non-private), if the parameter is documented with a proper javadoc.
@Override void doSomething(int a, int b) { // no issue reported on b compute(a); } public void foo(String s) { // designed to be extended but noop in standard case } protected void bar(String s) { //open-closed principle } public void qix(String s) { throw new UnsupportedOperationException("This method should be implemented in subclasses"); } /** * @param s This string may be use for further computation in overriding classes */ protected void foobar(int a, String s) { // no issue, method is overridable and unused parameter has proper javadoc compute(a); }
See
- CERT, MSC12-C. - Detect and remove code that has no effect or is never executed
Rename this constant name to match the regular expression '^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$'. Open
Group,
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all constant names match a provided regular expression.
Noncompliant Code Example
With the default regular expression ^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$
:
public class MyClass { public static final int first = 1; } public enum MyEnum { first; }
Compliant Solution
public class MyClass { public static final int FIRST = 1; } public enum MyEnum { FIRST; }
Add a private constructor to hide the implicit public one. Open
public class FHIRHelpers {
- Read upRead up
- Exclude checks
Utility classes, which are collections of static
members, are not meant to be instantiated. Even abstract utility classes, which can
be extended, should not have public constructors.
Java adds an implicit public constructor to every class which does not define at least one explicitly. Hence, at least one non-public constructor should be defined.
Noncompliant Code Example
class StringUtils { // Noncompliant public static String concatenate(String s1, String s2) { return s1 + s2; } }
Compliant Solution
class StringUtils { // Compliant private StringUtils() { throw new IllegalStateException("Utility class"); } public static String concatenate(String s1, String s2) { return s1 + s2; } }
Exceptions
When class contains public static void main(String[] args)
method it is not considered as utility class and will be ignored by this
rule.
Rename this constant name to match the regular expression '^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$'. Open
Endpoint,
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all constant names match a provided regular expression.
Noncompliant Code Example
With the default regular expression ^[A-Z][A-Z0-9]*(_[A-Z0-9]+)*$
:
public class MyClass { public static final int first = 1; } public enum MyEnum { first; }
Compliant Solution
public class MyClass { public static final int FIRST = 1; } public enum MyEnum { FIRST; }