Showing 4,226 of 4,226 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
export default {
css: 'CSS',
javascript: 'JavaScript',
node: 'Node.js',
php: 'PHP',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 48.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
export default {
websiteName: '30 seconds of code',
websiteDescription: 'Short code snippets for all your development needs',
shortName: '30s',
ownerName: 'Angelos Chalaris',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 48.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
const snippetData = PageSerializer.serializeRecordSet(
snippetPages,
{ withParams: true },
key => `${key.split('$')[1]}`
);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 48.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
preview: {
body: (collection, { serializers: { PreviewSerializer } }) =>
PreviewSerializer.serialize(collection, { type: 'collection' }),
cache: true,
},
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 48.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function body
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
body: snippet => {
if (!snippet.hasCollection) return [];
const ids = [];
if (snippet.orderedCollections[0]) {
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function debug
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
static debug(msg, printTrace = false) {
const header = Logger._headerLine(msg, 'debug', 'Logger.debug');
let _msg;
if (typeof msg === 'string') _msg = msg;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 2 locations. Consider refactoring. Open
const escapedQuery = query
.replace(/&/g, '&')
.replace(/</g, '<')
.replace(/>/g, '>')
.replace(/"/g, '"')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
str
.replace(/&/g, '&')
.replace(/>/g, '>')
.replace(/</g, '<')
.replace(/"/g, '"')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function body
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
body: snippet => {
const orderedCollections = [];
const primaryCollections = snippet.collections.primary;
const allSecondaryCollections = snippet.collections.secondary;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Line length Open
- Directional language (e.g. “above”, “below”) may only be used as part of a piece of content to indicate a relevant section of the content (e.g. “the above code example”).
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
- Use the full name or the name that’s closest to the official documentation when describing native code (e.g. "Function.prototype.apply()").
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* Browse all [snippets](https://30secondsofcode.org/snippets/p/1) or individual [snippet collections](https://30secondsofcode.org/collections/p/1) for each topic.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
excerpt: Boost your productivity with these 10 essential VS Code extensions for JavaScript developers.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
[Bookmarks](https://marketplace.visualstudio.com/items?itemName=alefragnani.Bookmarks) is one of those extensions that will significantly reduce your time jumping between different files, as it allows you to save important positions and navigate back to them easily and quickly.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
In order to build a **recursive solution**, we need to define the **base case**. In this situation, that would be **keys whose values are not objects**. In that case, we can simply **add the key-value pair to the result**.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
First header should be a top level header Open
## Shuffle an array
- Read upRead up
- Exclude checks
MD002 - First header should be a top level header
Tags: headers
Aliases: first-header-h1
Parameters: level (number; default 1)
This rule is triggered when the first header in the document isn't a h1 header:
## This isn't a H1 header
### Another header
The first header in the document should be a h1 header:
# Start with a H1 header
## Then use a H2 for subsections
Line length Open
Random value selection and shuffling are essential tools to have when working with arrays in JavaScript. While `Math.random()` seems like the easy solution for everything, it's sometimes not enough. In other cases, it's not obvious how to use it to get, for example, a random element while taking into account weight factors. Luckily, there's a solution for every one of these problems.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
> This code snippet may be fairly **inefficient for very large numbers**. Optimizations are possible, but they are beyond the scope of this article.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Line length Open
- **Snippets should solve real-world problems**, no matter how simple and should be abstract enough to be applied to different scenarios.
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.