This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cops checks if empty lines exist around the bodies of begin sections. This cop doesn't check empty lines at begin body beginning/end and around method definition body. Style/EmptyLinesAroundBeginBody or Style/EmptyLinesAroundMethodBody can be used for this purpose.

Example:

# good

begin
  do_something
rescue
  do_something2
else
  do_something3
ensure
  do_something4
end

# good

def foo
  do_something
rescue
  do_something2
end

# bad

begin
  do_something

rescue

  do_something2

else

  do_something3

ensure

  do_something4
end

# bad

def foo
  do_something

rescue

  do_something2
end

This cop enforces the use of a single string formatting utility. Valid options include Kernel#format, Kernel#sprintf and String#%.

The detection of String#% cannot be implemented in a reliable manner for all cases, so only two scenarios are considered - if the first argument is a string literal and if the second argument is an array literal.

Example: EnforcedStyle: format(default)

# bad
puts sprintf('%10s', 'hoge')
puts '%10s' % 'hoge'

# good
puts format('%10s', 'hoge')

Example: EnforcedStyle: sprintf

# bad
puts format('%10s', 'hoge')
puts '%10s' % 'hoge'

# good
puts sprintf('%10s', 'hoge')

Example: EnforcedStyle: percent

# bad
puts format('%10s', 'hoge')
puts sprintf('%10s', 'hoge')

# good
puts '%10s' % 'hoge'

Use a consistent style for named format string tokens.

Note: unannotated style cop only works for strings which are passed as arguments to those methods: sprintf, format, %. The reason is that unannotated format is very similar to encoded URLs or Date/Time formatting strings.

Example: EnforcedStyle: annotated (default)

# bad
format('%{greeting}', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%<greeting>s', greeting: 'Hello')</greeting>

Example: EnforcedStyle: template

# bad
format('%<greeting>s', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%{greeting}', greeting: 'Hello')</greeting>

Example: EnforcedStyle: unannotated

# bad
format('%<greeting>s', greeting: 'Hello')
format('%{greeting}', 'Hello')

# good
format('%s', 'Hello')</greeting>

This cop checks for the formatting of empty method definitions. By default it enforces empty method definitions to go on a single line (compact style), but it can be configured to enforce the end to go on its own line (expanded style).

Note: A method definition is not considered empty if it contains comments.

Example: EnforcedStyle: compact (default)

# bad
def foo(bar)
end

def self.foo(bar)
end

# good
def foo(bar); end

def foo(bar)
  # baz
end

def self.foo(bar); end

Example: EnforcedStyle: expanded

# bad
def foo(bar); end

def self.foo(bar); end

# good
def foo(bar)
end

def self.foo(bar)
end

Use a consistent style for named format string tokens.

Note: unannotated style cop only works for strings which are passed as arguments to those methods: sprintf, format, %. The reason is that unannotated format is very similar to encoded URLs or Date/Time formatting strings.

Example: EnforcedStyle: annotated (default)

# bad
format('%{greeting}', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%<greeting>s', greeting: 'Hello')</greeting>

Example: EnforcedStyle: template

# bad
format('%<greeting>s', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%{greeting}', greeting: 'Hello')</greeting>

Example: EnforcedStyle: unannotated

# bad
format('%<greeting>s', greeting: 'Hello')
format('%{greeting}', 'Hello')

# good
format('%s', 'Hello')</greeting>

Use a guard clause instead of wrapping the code inside a conditional expression

Example:

# bad
def test
  if something
    work
  end
end

# good
def test
  return unless something
  work
end

# also good
def test
  work if something
end

# bad
if something
  raise 'exception'
else
  ok
end

# good
raise 'exception' if something
ok

This cop checks for usage of comparison operators (==, >, <) to test numbers as zero, positive, or negative. These can be replaced by their respective predicate methods. The cop can also be configured to do the reverse.

The cop disregards #nonzero? as it its value is truthy or falsey, but not true and false, and thus not always interchangeable with != 0.

The cop ignores comparisons to global variables, since they are often populated with objects which can be compared with integers, but are not themselves Interger polymorphic.

Example: EnforcedStyle: predicate (default)

# bad

foo == 0
0 > foo
bar.baz > 0

# good

foo.zero?
foo.negative?
bar.baz.positive?

Example: EnforcedStyle: comparison

# bad

foo.zero?
foo.negative?
bar.baz.positive?

# good

foo == 0
0 > foo
bar.baz > 0

This cop checks for the formatting of empty method definitions. By default it enforces empty method definitions to go on a single line (compact style), but it can be configured to enforce the end to go on its own line (expanded style).

Note: A method definition is not considered empty if it contains comments.

Example: EnforcedStyle: compact (default)

# bad
def foo(bar)
end

def self.foo(bar)
end

# good
def foo(bar); end

def foo(bar)
  # baz
end

def self.foo(bar); end

Example: EnforcedStyle: expanded

# bad
def foo(bar); end

def self.foo(bar); end

# good
def foo(bar)
end

def self.foo(bar)
end

This cop checks for uses of fail and raise.

Example: EnforcedStyle: only_raise (default)

# The `only_raise` style enforces the sole use of `raise`.
# bad
begin
  fail
rescue Exception
  # handle it
end

def watch_out
  fail
rescue Exception
  # handle it
end

Kernel.fail

# good
begin
  raise
rescue Exception
  # handle it
end

def watch_out
  raise
rescue Exception
  # handle it
end

Kernel.raise

Example: EnforcedStyle: only_fail

# The `only_fail` style enforces the sole use of `fail`.
# bad
begin
  raise
rescue Exception
  # handle it
end

def watch_out
  raise
rescue Exception
  # handle it
end

Kernel.raise

# good
begin
  fail
rescue Exception
  # handle it
end

def watch_out
  fail
rescue Exception
  # handle it
end

Kernel.fail

Example: EnforcedStyle: semantic

# The `semantic` style enforces the use of `fail` to signal an
# exception, then will use `raise` to trigger an offense after
# it has been rescued.
# bad
begin
  raise
rescue Exception
  # handle it
end

def watch_out
  # Error thrown
rescue Exception
  fail
end

Kernel.fail
Kernel.raise

# good
begin
  fail
rescue Exception
  # handle it
end

def watch_out
  fail
rescue Exception
  raise 'Preferably with descriptive message'
end

explicit_receiver.fail
explicit_receiver.raise

This cop enforces the use of a single string formatting utility. Valid options include Kernel#format, Kernel#sprintf and String#%.

The detection of String#% cannot be implemented in a reliable manner for all cases, so only two scenarios are considered - if the first argument is a string literal and if the second argument is an array literal.

Example: EnforcedStyle: format(default)

# bad
puts sprintf('%10s', 'hoge')
puts '%10s' % 'hoge'

# good
puts format('%10s', 'hoge')

Example: EnforcedStyle: sprintf

# bad
puts format('%10s', 'hoge')
puts '%10s' % 'hoge'

# good
puts sprintf('%10s', 'hoge')

Example: EnforcedStyle: percent

# bad
puts format('%10s', 'hoge')
puts sprintf('%10s', 'hoge')

# good
puts '%10s' % 'hoge'

This cop enforces the use of a single string formatting utility. Valid options include Kernel#format, Kernel#sprintf and String#%.

The detection of String#% cannot be implemented in a reliable manner for all cases, so only two scenarios are considered - if the first argument is a string literal and if the second argument is an array literal.

Example: EnforcedStyle: format(default)

# bad
puts sprintf('%10s', 'hoge')
puts '%10s' % 'hoge'

# good
puts format('%10s', 'hoge')

Example: EnforcedStyle: sprintf

# bad
puts format('%10s', 'hoge')
puts '%10s' % 'hoge'

# good
puts sprintf('%10s', 'hoge')

Example: EnforcedStyle: percent

# bad
puts format('%10s', 'hoge')
puts sprintf('%10s', 'hoge')

# good
puts '%10s' % 'hoge'

Use a consistent style for named format string tokens.

Note: unannotated style cop only works for strings which are passed as arguments to those methods: sprintf, format, %. The reason is that unannotated format is very similar to encoded URLs or Date/Time formatting strings.

Example: EnforcedStyle: annotated (default)

# bad
format('%{greeting}', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%<greeting>s', greeting: 'Hello')</greeting>

Example: EnforcedStyle: template

# bad
format('%<greeting>s', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%{greeting}', greeting: 'Hello')</greeting>

Example: EnforcedStyle: unannotated

# bad
format('%<greeting>s', greeting: 'Hello')
format('%{greeting}', 'Hello')

# good
format('%s', 'Hello')</greeting>

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop checks for every useless assignment to local variable in every scope. The basic idea for this cop was from the warning of ruby -cw:

assigned but unused variable - foo

Currently this cop has advanced logic that detects unreferenced reassignments and properly handles varied cases such as branch, loop, rescue, ensure, etc.

Example:

# bad

def some_method
  some_var = 1
  do_something
end

Example:

# good

def some_method
  some_var = 1
  do_something(some_var)
end

Use a consistent style for named format string tokens.

Note: unannotated style cop only works for strings which are passed as arguments to those methods: sprintf, format, %. The reason is that unannotated format is very similar to encoded URLs or Date/Time formatting strings.

Example: EnforcedStyle: annotated (default)

# bad
format('%{greeting}', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%<greeting>s', greeting: 'Hello')</greeting>

Example: EnforcedStyle: template

# bad
format('%<greeting>s', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%{greeting}', greeting: 'Hello')</greeting>

Example: EnforcedStyle: unannotated

# bad
format('%<greeting>s', greeting: 'Hello')
format('%{greeting}', 'Hello')

# good
format('%s', 'Hello')</greeting>

Use a consistent style for named format string tokens.

Note: unannotated style cop only works for strings which are passed as arguments to those methods: sprintf, format, %. The reason is that unannotated format is very similar to encoded URLs or Date/Time formatting strings.

Example: EnforcedStyle: annotated (default)

# bad
format('%{greeting}', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%<greeting>s', greeting: 'Hello')</greeting>

Example: EnforcedStyle: template

# bad
format('%<greeting>s', greeting: 'Hello')
format('%s', 'Hello')

# good
format('%{greeting}', greeting: 'Hello')</greeting>

Example: EnforcedStyle: unannotated

# bad
format('%<greeting>s', greeting: 'Hello')
format('%{greeting}', 'Hello')

# good
format('%s', 'Hello')</greeting>

This cop checks for extra/unnecessary whitespace.

Example:

# good if AllowForAlignment is true
name      = "RuboCop"
# Some comment and an empty line

website  += "/bbatsov/rubocop" unless cond
puts        "rubocop"          if     debug

# bad for any configuration
set_app("RuboCop")
website  = "https://github.com/bbatsov/rubocop"