This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end