CoolElvis/redlock_for_collection

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

Too Many Instance Variables is a special case of LargeClass.

Example

Given this configuration

TooManyInstanceVariables:
  max_instance_variables: 3

and this code:

class TooManyInstanceVariables
  def initialize
    @arg_1 = :dummy
    @arg_2 = :dummy
    @arg_3 = :dummy
    @arg_4 = :dummy
  end
end

Reek would emit the following warning:

test.rb -- 5 warnings:
  [1]:TooManyInstanceVariables has at least 4 instance variables (TooManyInstanceVariables)

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes should not assume that instance variables are set or present outside of the current class definition.

Good:

class Foo
  def initialize
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Good as well:

class Foo
  def foo?
    bar == :foo
  end

  def bar
    @bar ||= :foo
  end
end

Bad:

class Foo
  def go_foo!
    @bar = :foo
  end

  def foo?
    @bar == :foo
  end
end

Example

Running Reek on:

class Dummy
  def test
    @ivar
  end
end

would report:

[1]:InstanceVariableAssumption: Dummy assumes too much for instance variable @ivar

Note that this example would trigger this smell warning as well:

class Parent
  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    @omg
  end
end

The way to address the smell warning is that you should create an attr_reader to use @omg in the subclass and not access @omg directly like this:

class Parent
  attr_reader :omg

  def initialize(omg)
    @omg = omg
  end
end

class Child < Parent
  def foo
    omg
  end
end

Directly accessing instance variables is considered a smell because it breaks encapsulation and makes it harder to reason about code.

If you don't want to expose those methods as public API just make them private like this:

class Parent
  def initialize(omg)
    @omg = omg
  end

  private
  attr_reader :omg
end

class Child < Parent
  def foo
    omg
  end
end

Current Support in Reek

An instance variable must:

• be set in the constructor
• or be accessed through a method with lazy initialization / memoization.

If not, Instance Variable Assumption will be reported.

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.

The same holds to a lesser extent for getters, but Reek doesn't flag those.

Example

Given:

class Klass
  attr_accessor :dummy
end

Reek would emit the following warning:

reek test.rb

test.rb -- 1 warning:
  [2]:Klass declares the writable attribute dummy (Attribute)

A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.

The same holds to a lesser extent for getters, but Reek doesn't flag those.

Example

Given:

class Klass
  attr_accessor :dummy
end

Reek would emit the following warning:

reek test.rb

test.rb -- 1 warning:
  [2]:Klass declares the writable attribute dummy (Attribute)

A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.

The same holds to a lesser extent for getters, but Reek doesn't flag those.

Example

Given:

class Klass
  attr_accessor :dummy
end

Reek would emit the following warning:

reek test.rb

test.rb -- 1 warning:
  [2]:Klass declares the writable attribute dummy (Attribute)

A Utility Function is any instance method that has no dependency on the state of the instance.

A Utility Function is any instance method that has no dependency on the state of the instance.

A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.

The same holds to a lesser extent for getters, but Reek doesn't flag those.

Example

Given:

class Klass
  attr_accessor :dummy
end

Reek would emit the following warning:

reek test.rb

test.rb -- 1 warning:
  [2]:Klass declares the writable attribute dummy (Attribute)

A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.

The same holds to a lesser extent for getters, but Reek doesn't flag those.

Example

Given:

class Klass
  attr_accessor :dummy
end

Reek would emit the following warning:

reek test.rb

test.rb -- 1 warning:
  [2]:Klass declares the writable attribute dummy (Attribute)

A class that publishes a setter for an instance variable invites client classes to become too intimate with its inner workings, and in particular with its representation of state.

The same holds to a lesser extent for getters, but Reek doesn't flag those.

Example

Given:

class Klass
  attr_accessor :dummy
end

Reek would emit the following warning:

reek test.rb

test.rb -- 1 warning:
  [2]:Klass declares the writable attribute dummy (Attribute)