Showing 1,441 of 1,441 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'creates a annotator without a password' do
expect(Annotator.count).to eq(0)
post annotators_path,
params: {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 42.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
post api_v1_raw_data_path(auth_token: @auth_token),
params: {
raw_data: [
{
'shape' => raw_datum_1.shape,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 42.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
post api_v1_raw_data_path(auth_token: @auth_token),
params: {
raw_data: [
{
'shape' => raw_datum_1.shape,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 42.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'can batch process a zip archive with valid files' do
expect(RawDatum.all.count).to eq(0)
file_path = Rails.root.join('spec/fixtures/zip/valid.zip')
batch_result = RawDatum.zip_to_data @raw_datum.project,
file_path
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'can batch process a zip archive with subdirectories' do
expect(RawDatum.all.count).to eq(0)
file_path = Rails.root.join('spec/fixtures/zip/subdirectory1.zip')
batch_result = RawDatum.zip_to_data @raw_datum.project,
file_path
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 40.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Block has too many lines. [30/25] Open
operation :patch do
key :comsumes, ['application/json']
key :description, I18n.t('api.statistic.update.description')
key :operationId, 'statistic_update'
key :produces, ['application/json']
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
operation :post do
key :comsumes, ['application/json']
key :description, I18n.t('api.annotation_document.create.description')
key :operationId, 'annotation_document_create'
key :produces, ['application/json']
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
operation :patch do
key :comsumes, ['application/json']
key :description, I18n.t('api.annotation_document.update.description')
key :operationId, 'annotation_document_update'
key :produces, ['application/json']
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
operation :patch do
key :comsumes, ['application/json']
key :description, I18n.t('api.raw_datum.update.description')
key :operationId, 'raw_datum_update'
key :produces, ['application/json']
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
operation :post do
key :comsumes, ['application/json']
key :description, I18n.t('api.statistic.create.description')
key :operationId, 'statistic_create'
key :produces, ['application/json']
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
operation :post do
key :comsumes, ['application/json']
key :description, I18n.t('api.raw_datum.create.description')
key :operationId, 'raw_datum_create'
key :produces, ['application/json']
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
RSpec.configure do |config|
config.use_transactional_fixtures = false
config.before(:suite) do
if config.use_transactional_fixtures?
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
describe 'should be unique within one project and' do
it 'should not be assigned twice' do
common_project = @annotation_document_with_different_admin.raw_datum.project
test_string = 'The company Implisense GmbH in Berlin.'
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
it 'creates an annotation document' do
raw_datum = FactoryGirl.create(:raw_datum)
expect(AnnotationDocument.count).to eq(0)
annotation_document = {
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [30/25] Open
it 'updates a service with valid data' do
expect(Service.count).to eq(1)
stub_request(:get, @service.url)
.to_return(
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'destroys all annotation documents from a project' do
expect(AnnotationDocument.count).to eq(2)
delete project_annotation_documents_path(@project),
params: {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 39.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'can batch process a zip archive with Mac encoded file names' do
expect(RawDatum.all.count).to eq(0)
file_path = Rails.root.join('spec/fixtures/zip/mac_encoding.zip')
batch_result = RawDatum.zip_to_data @raw_datum.project,
file_path
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 39.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'destroys all raw data association from a project' do
expect(RawDatum.count).to eq(2)
delete project_raw_data_path(@project),
params: {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 39.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
it 'can batch process a zip archive with Linux encoded file names' do
expect(RawDatum.all.count).to eq(0)
file_path = Rails.root.join('spec/fixtures/zip/linux_encoding.zip')
batch_result = RawDatum.zip_to_data @raw_datum.project,
file_path
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 39.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Block has too many lines. [29/25] Open
swagger_schema :Statistic do
key :required,
[
:key
]
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.